利用Java多線程技術導入數據到Elasticsearch的方法步驟

更新時間：2019年07月16日 09:47:06 作者：Wooola

這篇文章主要介紹了利用Java多線程技術導入數據到Elasticsearch的方法步驟，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧

前言

近期接到一個任務，需要改造現有從mysql往Elasticsearch導入數據MTE(mysqlToEs)小工具，由于之前采用單線程導入，千億數據需要兩周左右的時間才能導入完成，導入效率非常低。所以樓主花了3天的時間，利用java線程池框架Executors中的FixedThreadPool線程池重寫了MTE導入工具，單臺服務器導入效率提高十幾倍（合理調整線程數據，效率更高）。

關鍵技術棧

Elasticsearch
jdbc
ExecutorService\Thread
sql

工具說明

maven依賴

<dependency> 
 <groupId>mysql</groupId> 
 <artifactId>mysql-connector-java</artifactId> 
 <version>${mysql.version}</version> 
</dependency> 
<dependency> 
 <groupId>org.elasticsearch</groupId> 
 <artifactId>elasticsearch</artifactId> 
 <version>${elasticsearch.version}</version> 
</dependency> 
<dependency> 
 <groupId>org.elasticsearch.client</groupId> 
 <artifactId>transport</artifactId> 
 <version>${elasticsearch.version}</version> 
</dependency> 
<dependency> 
 <groupId>org.projectlombok</groupId> 
 <artifactId>lombok</artifactId> 
 <version>${lombok.version}</version> 
</dependency> 
<dependency> 
 <groupId>com.alibaba</groupId> 
 <artifactId>fastjson</artifactId> 
 <version>${fastjson.version}</version> 
</dependency>

java線程池設置

默認線程池大小為21個，可調整。其中POR為處理流程已辦數據線程池，ROR為處理流程已閱數據線程池。

private static int THREADS = 21; 
public static ExecutorService POR = Executors.newFixedThreadPool(THREADS); 
public static ExecutorService ROR = Executors.newFixedThreadPool(THREADS);

定義已辦生產者線程/已閱生產者線程：ZlPendProducer/ZlReadProducer

public class ZlPendProducer implements Runnable { 
 ... 
 @Override 
 public void run() { 
 System.out.println(threadName + "::啟動..."); 
 for (int j = 0; j < Const.TBL.TBL_PEND_COUNT; j++) 
 try { 
 .... 
 int size = 1000; 
 for (int i = 0; i < count; i += size) { 
 if (i + size > count) { 
 //作用為size最后沒有100條數據則剩余幾條newList中就裝幾條 
 size = count - i; 
 } 
 String sql = "select * from " + tableName + " limit " + i + ", " + size; 
 System.out.println(tableName + "::sql::" + sql); 
 rs = statement.executeQuery(sql); 
 List<HistPendingEntity> lst = new ArrayList<>(); 
 while (rs.next()) { 
 HistPendingEntity p = PendUtils.getHistPendingEntity(rs); 
 lst.add(p); 
 } 
 MteExecutor.POR.submit(new ZlPendConsumer(lst)); 
 Thread.sleep(2000); 
 } 
 .... 
 } catch (Exception e) { 
 e.printStackTrace(); 
 } 
 } 
} 
public class ZlReadProducer implements Runnable { 
 ...已閱生產者處理邏輯同已辦生產者 
}

定義已辦消費者線程/已閱生產者線程：ZlPendConsumer/ZlReadConsumer

public class ZlPendConsumer implements Runnable { 
 private String threadName; 
 private List<HistPendingEntity> lst; 
 public ZlPendConsumer(List<HistPendingEntity> lst) { 
 this.lst = lst; 
 } 
 @Override 
 public void run() { 
 ... 
 lst.forEach(v -> { 
 try { 
 String json = new Gson().toJson(v); 
 EsClient.addDataInJSON(json, Const.ES.HistPendDB_Index, Const.ES.HistPendDB_type, v.getPendingId(), null); 
 Const.COUNTER.LD_P.incrementAndGet(); 
 } catch (Exception e) { 
 e.printStackTrace(); 
 System.out.println("err::PendingId::" + v.getPendingId()); 
 } 
 }); 
 ... 
 } 
} 
public class ZlReadConsumer implements Runnable { 
 //已閱消費者處理邏輯同已辦消費者 
}

定義導入Elasticsearch數據監控線程：Monitor

監控線程-Monitor為了計算每分鐘導入Elasticsearch的數據總條數，利用監控線程，可以調整線程池的線程數的大小，以便利用多線程更快速的導入數據。

public void monitorToES() { 
 new Thread(() -> { 
 while (true) { 
 StringBuilder sb = new StringBuilder(); 
 sb.append("已辦表數::").append(Const.TBL.TBL_PEND_COUNT) 
 .append("::已辦總數::").append(Const.COUNTER.LD_P_TOTAL) 
 .append("::已辦入庫總數::").append(Const.COUNTER.LD_P); 
 sb.append("~~~~已閱表數::").append(Const.TBL.TBL_READ_COUNT); 
 sb.append("::已閱總數::").append(Const.COUNTER.LD_R_TOTAL) 
 .append("::已閱入庫總數::").append(Const.COUNTER.LD_R); 
 if (ldPrevPendCount == 0 && ldPrevReadCount == 0) { 
 ldPrevPendCount = Const.COUNTER.LD_P.get(); 
 ldPrevReadCount = Const.COUNTER.LD_R.get(); 
 start = System.currentTimeMillis(); 
 } else { 
 long end = System.currentTimeMillis(); 
 if ((end - start) / 1000 >= 60) { 
 start = end; 
 sb.append("\n#########################################\n"); 
 sb.append("已辦每分鐘TPS::" + (Const.COUNTER.LD_P.get() - ldPrevPendCount) + "條"); 
 sb.append("::已閱每分鐘TPS::" + (Const.COUNTER.LD_R.get() - ldPrevReadCount) + "條"); 
 ldPrevPendCount = Const.COUNTER.LD_P.get(); 
 ldPrevReadCount = Const.COUNTER.LD_R.get(); 
 } 
 } 
 System.out.println(sb.toString()); 
 try { 
 Thread.sleep(3000); 
 } catch (InterruptedException e) { 
 e.printStackTrace(); 
 } 
 } 
 }).start(); 
}

初始化Elasticsearch：EsClient

String cName = meta.get("cName");//es集群名字 
String esNodes = meta.get("esNodes");//es集群ip節點 
Settings esSetting = Settings.builder() 
 .put("cluster.name", cName) 
 .put("client.transport.sniff", true)//增加嗅探機制，找到ES集群 
 .put("thread_pool.search.size", 5)//增加線程池個數，暫時設為5 
 .build(); 
String[] nodes = esNodes.split(","); 
client = new PreBuiltTransportClient(esSetting); 
for (String node : nodes) { 
 if (node.length() > 0) { 
 String[] hostPort = node.split(":"); 
 client.addTransportAddress(new TransportAddress(InetAddress.getByName(hostPort[0]), Integer.parseInt(hostPort[1]))); 
 } 
}

初始化數據庫連接

conn = DriverManager.getConnection(url, user, password);

啟動參數

nohup java -jar mte.jar ES-Cluster2019 node1:9300,node2:9300,node3:9300 root 123456! jdbc:mysql://ip:3306/mte 130 130 >> ./mte.log 2>&1 &

參數說明

ES-Cluster2019 為Elasticsearch集群名字

node1:9300,node2:9300,node3:9300為es的節點IP

130 130為已辦已閱分表的數據

程序入口：MteMain

// 監控線程 
Monitor monitorService = new Monitor(); 
monitorService.monitorToES(); 
// 已辦生產者線程 
Thread pendProducerThread = new Thread(new ZlPendProducer(conn, "ZlPendProducer")); 
pendProducerThread.start(); 
// 已閱生產者線程 
Thread readProducerThread = new Thread(new ZlReadProducer(conn, "ZlReadProducer")); 
readProducerThread.start();

以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。

您可能感興趣的文章: