c# Winform自定義控件-儀表盤功能
更新時間：2019年09月05日 09:36:35 作者：冰封一夏
這篇文章主要介紹了c#Winform自定義控件-儀表盤功能，本文通過實例代碼給大家介紹的非常詳細，具有一定的參考借鑒價值,需要的朋友可以參考下
前提
入行已經7,8年了，一直想做一套漂亮點的自定義控件，于是就有了本系列文章。
GitHub：https://github.com/kwwwvagaa/NetWinformControl
碼云：https://gitee.com/kwwwvagaa/net_winform_custom_control.git
NuGet
Install-Package HZH_Controls
目錄
https://www.cnblogs.com/bfyx/p/11364884.html
用處及效果
準備工作
依然使用GDI+畫的，不懂的話就百度一下吧
另外主要用到了三角函數，如果不懂，可以向初中的數學老師再問問（你也可以百度一下）
開始
添加一個類UCMeter 繼承 UserControl
首先添加一個需要控制的屬性
private int splitCount = 10;
/// <summary>
/// Gets or sets the split count.
/// </summary>
/// <value>The split count.</value>
[Description("分隔刻度數量，>1"), Category("自定義")]
public int SplitCount
{
get { return splitCount; }
set
{
if (value < 1)
return;
splitCount = value;
Refresh();
}
}
private int meterDegrees = 150;
/// <summary>
/// Gets or sets the meter degrees.
/// </summary>
/// <value>The meter degrees.</value>
[Description("表盤跨度角度，0-360"), Category("自定義")]
public int MeterDegrees
{
get { return meterDegrees; }
set
{
if (value > 360 || value <= 0)
return;
meterDegrees = value;
Refresh();
}
}
private decimal minValue = 0;
/// <summary>
/// Gets or sets the minimum value.
/// </summary>
/// <value>The minimum value.</value>
[Description("最小值,<MaxValue"), Category("自定義")]
public decimal MinValue
{
get { return minValue; }
set
{
if (value >= maxValue)
return;
minValue = value;
Refresh();
}
}
private decimal maxValue = 100;
/// <summary>
/// Gets or sets the maximum value.
/// </summary>
/// <value>The maximum value.</value>
[Description("最大值,>MinValue"), Category("自定義")]
public decimal MaxValue
{
get { return maxValue; }
set
{
if (value <= minValue)
return;
maxValue = value;
Refresh();
}
}
/// <summary>
/// 獲取或設置控件顯示的文字的字體。
/// </summary>
/// <value>The font.</value>
/// <PermissionSet>
/// <IPermission class="System.Security.Permissions.EnvironmentPermission, mscorlib, Version=2.0.3600.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" />
/// <IPermission class="System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.3600.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" />
/// <IPermission class="System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.3600.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Flags="UnmanagedCode, ControlEvidence" />
/// <IPermission class="System.Diagnostics.PerformanceCounterPermission, System, Version=2.0.3600.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" />
/// </PermissionSet>
[Description("刻度字體"), Category("自定義")]
public override Font Font
{
get
{
return base.Font;
}
set
{
base.Font = value;
Refresh();
}
}
private decimal m_value = 0;
/// <summary>
/// Gets or sets the value.
/// </summary>
/// <value>The value.</value>
[Description("值，>=MinValue并且<=MaxValue"), Category("自定義")]
public decimal Value
{
get { return m_value; }
set
{
if (value < minValue || value > maxValue)
return;
m_value = value;
Refresh();
}
}
private MeterTextLocation textLocation = MeterTextLocation.None;
/// <summary>
/// Gets or sets the text location.
/// </summary>
/// <value>The text location.</value>
[Description("值和固定文字顯示位置"), Category("自定義")]
public MeterTextLocation TextLocation
{
get { return textLocation; }
set
{
textLocation = value;
Refresh();
}
}
private string fixedText;
/// <summary>
/// Gets or sets the fixed text.
/// </summary>
/// <value>The fixed text.</value>
[Description("固定文字"), Category("自定義")]
public string FixedText
{
get { return fixedText; }
set
{
fixedText = value;
Refresh();
}
}
private Font textFont = DefaultFont;
/// <summary>
/// Gets or sets the text font.
/// </summary>
/// <value>The text font.</value>
[Description("值和固定文字字體"), Category("自定義")]
public Font TextFont
{
get { return textFont; }
set
{
textFont = value;
Refresh();
}
}
private Color externalRoundColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the external round.
/// </summary>
/// <value>The color of the external round.</value>
[Description("外圓顏色"), Category("自定義")]
public Color ExternalRoundColor
{
get { return externalRoundColor; }
set
{
externalRoundColor = value;
Refresh();
}
}
private Color insideRoundColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the inside round.
/// </summary>
/// <value>The color of the inside round.</value>
[Description("內圓顏色"), Category("自定義")]
public Color InsideRoundColor
{
get { return insideRoundColor; }
set
{
insideRoundColor = value;
Refresh();
}
}
private Color boundaryLineColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the boundary line.
/// </summary>
/// <value>The color of the boundary line.</value>
[Description("邊界線顏色"), Category("自定義")]
public Color BoundaryLineColor
{
get { return boundaryLineColor; }
set
{
boundaryLineColor = value;
Refresh();
}
}
private Color scaleColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the scale.
/// </summary>
/// <value>The color of the scale.</value>
[Description("刻度顏色"), Category("自定義")]
public Color ScaleColor
{
get { return scaleColor; }
set
{
scaleColor = value;
Refresh();
}
}
private Color scaleValueColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the scale value.
/// </summary>
/// <value>The color of the scale value.</value>
[Description("刻度值文字顏色"), Category("自定義")]
public Color ScaleValueColor
{
get { return scaleValueColor; }
set
{
scaleValueColor = value;
Refresh();
}
}
private Color pointerColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the pointer.
/// </summary>
/// <value>The color of the pointer.</value>
[Description("指針顏色"), Category("自定義")]
public Color PointerColor
{
get { return pointerColor; }
set
{
pointerColor = value;
Refresh();
}
}
private Color textColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the text.
/// </summary>
/// <value>The color of the text.</value>
[Description("值和固定文字顏色"), Category("自定義")]
public Color TextColor
{
get { return textColor; }
set
{
textColor = value;
Refresh();
}
}
Rectangle m_rectWorking;
重繪
protected override void OnPaint(PaintEventArgs e)
{
base.OnPaint(e);
var g = e.Graphics;
g.SetGDIHigh();
//外圓
float fltStartAngle = -90 - (meterDegrees) / 2 + 360;
var r1 = new Rectangle(m_rectWorking.Location, new Size(m_rectWorking.Width, m_rectWorking.Width));
g.DrawArc(new Pen(new SolidBrush(externalRoundColor), 1), r1, fltStartAngle, meterDegrees);
//內圓
var r2 = new Rectangle(m_rectWorking.Left + (m_rectWorking.Width - m_rectWorking.Width / 4) / 2, m_rectWorking.Top + (m_rectWorking.Width - m_rectWorking.Width / 4) / 2, m_rectWorking.Width / 4, m_rectWorking.Width / 4);
g.DrawArc(new Pen(new SolidBrush(insideRoundColor), 1), r2, fltStartAngle, meterDegrees);
//邊界線
if (meterDegrees != 360)
{
float fltAngle = fltStartAngle - 180;
float intY = (float)(m_rectWorking.Top + m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - m_rectWorking.Width / 8) * Math.Sin(Math.PI * (fltAngle / 180.00F))));
float intX = (float)(m_rectWorking.Left + (m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - m_rectWorking.Width / 8) * Math.Cos(Math.PI * (fltAngle / 180.00F)))));
float fltY1 = (float)(m_rectWorking.Top + m_rectWorking.Width / 2 - (m_rectWorking.Width / 8 * Math.Sin(Math.PI * (fltAngle / 180.00F))));
float fltX1 = (float)(m_rectWorking.Left + (m_rectWorking.Width / 2 - (m_rectWorking.Width / 8 * Math.Cos(Math.PI * (fltAngle / 180.00F)))));
g.DrawLine(new Pen(new SolidBrush(boundaryLineColor), 1), new PointF(intX, intY), new PointF(fltX1, fltY1));
g.DrawLine(new Pen(new SolidBrush(boundaryLineColor), 1), new PointF(m_rectWorking.Right - (fltX1 - m_rectWorking.Left), fltY1), new PointF(m_rectWorking.Right - (intX - m_rectWorking.Left), intY));
}
//分割線
int _splitCount = splitCount * 2;
float fltSplitValue = (float)meterDegrees / (float)_splitCount;
for (int i = 0; i <= _splitCount; i++)
{
float fltAngle = (fltStartAngle + fltSplitValue * i - 180) % 360;
float fltY1 = (float)(m_rectWorking.Top + m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2) * Math.Sin(Math.PI * (fltAngle / 180.00F))));
float fltX1 = (float)(m_rectWorking.Left + (m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2) * Math.Cos(Math.PI * (fltAngle / 180.00F)))));
float fltY2 = 0;
float fltX2 = 0;
if (i % 2 == 0)
{
fltY2 = (float)(m_rectWorking.Top + m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 10) * Math.Sin(Math.PI * (fltAngle / 180.00F))));
fltX2 = (float)(m_rectWorking.Left + (m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 10) * Math.Cos(Math.PI * (fltAngle / 180.00F)))));
if (!(meterDegrees == 360 && i == _splitCount))
{
decimal decValue = minValue + (maxValue - minValue) / _splitCount * i;
var txtSize = g.MeasureString(decValue.ToString("0.##"), this.Font);
float fltFY1 = (float)(m_rectWorking.Top - txtSize.Height / 2 + m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 20) * Math.Sin(Math.PI * (fltAngle / 180.00F))));
float fltFX1 = (float)(m_rectWorking.Left - txtSize.Width / 2 + (m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 20) * Math.Cos(Math.PI * (fltAngle / 180.00F)))));
g.DrawString(decValue.ToString("0.##"), Font, new SolidBrush(scaleValueColor), fltFX1, fltFY1);
}
}
else
{
fltY2 = (float)(m_rectWorking.Top + m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 5) * Math.Sin(Math.PI * (fltAngle / 180.00F))));
fltX2 = (float)(m_rectWorking.Left + (m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 5) * Math.Cos(Math.PI * (fltAngle / 180.00F)))));
}
g.DrawLine(new Pen(new SolidBrush(scaleColor), i % 2 == 0 ? 2 : 1), new PointF(fltX1, fltY1), new PointF(fltX2, fltY2));
}
//值文字和固定文字
if (textLocation != MeterTextLocation.None)
{
string str = m_value.ToString("0.##");
var txtSize = g.MeasureString(str, textFont);
float fltY = m_rectWorking.Top + m_rectWorking.Width / 4 - txtSize.Height / 2;
float fltX = m_rectWorking.Left + m_rectWorking.Width / 2 - txtSize.Width / 2;
g.DrawString(str, textFont, new SolidBrush(textColor), new PointF(fltX, fltY));
if (!string.IsNullOrEmpty(fixedText))
{
str = fixedText;
txtSize = g.MeasureString(str, textFont);
fltY = m_rectWorking.Top + m_rectWorking.Width / 4 + txtSize.Height / 2;
fltX = m_rectWorking.Left + m_rectWorking.Width / 2 - txtSize.Width / 2;
g.DrawString(str, textFont, new SolidBrush(textColor), new PointF(fltX, fltY));
}
}
//畫指針
g.FillEllipse(new SolidBrush(Color.FromArgb(100, pointerColor.R, pointerColor.G, pointerColor.B)), new Rectangle(m_rectWorking.Left + m_rectWorking.Width / 2 - 10, m_rectWorking.Top + m_rectWorking.Width / 2 - 10, 20, 20));
g.FillEllipse(Brushes.Red, new Rectangle(m_rectWorking.Left + m_rectWorking.Width / 2 - 5, m_rectWorking.Top + m_rectWorking.Width / 2 - 5, 10, 10));
float fltValueAngle = (fltStartAngle + ((float)(m_value - minValue) / (float)(maxValue - minValue)) * (float)meterDegrees - 180) % 360;
float intValueY1 = (float)(m_rectWorking.Top + m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 30) * Math.Sin(Math.PI * (fltValueAngle / 180.00F))));
float intValueX1 = (float)(m_rectWorking.Left + (m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 30) * Math.Cos(Math.PI * (fltValueAngle / 180.00F)))));
g.DrawLine(new Pen(new SolidBrush(pointerColor), 3), intValueX1, intValueY1, m_rectWorking.Left + m_rectWorking.Width / 2, m_rectWorking.Top + m_rectWorking.Width / 2);
}
還有一個顯示文字位置的枚舉
/// <summary>
/// Enum MeterTextLocation
/// </summary>
public enum MeterTextLocation
{
/// <summary>
/// The none
/// </summary>
None,
/// <summary>
/// The top
/// </summary>
Top,
/// <summary>
/// The bottom
/// </summary>
Bottom
}
代碼就這么多了，看完整代碼
// ***********************************************************************
// Assembly : HZH_Controls
// Created : 2019-09-03
//
// ***********************************************************************
// <copyright file="UCMeter.cs">
// Copyright by Huang Zhenghui(黃正輝) All, QQ group:568015492 QQ:623128629 Email:623128629@qq.com
// </copyright>
//
// Blog: https://www.cnblogs.com/bfyx
// GitHub：https://github.com/kwwwvagaa/NetWinformControl
// gitee：https://gitee.com/kwwwvagaa/net_winform_custom_control.git
//
// If you use this code, please keep this note.
// ***********************************************************************
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using System.Drawing;
using System.Drawing.Drawing2D;
using System.ComponentModel;
namespace HZH_Controls.Controls
{
/// <summary>
/// Class UCMeter.
/// Implements the <see cref="System.Windows.Forms.UserControl" />
/// </summary>
/// <seealso cref="System.Windows.Forms.UserControl" />
public class UCMeter : UserControl
{
private int splitCount = 10;
/// <summary>
/// Gets or sets the split count.
/// </summary>
/// <value>The split count.</value>
[Description("分隔刻度數量，>1"), Category("自定義")]
public int SplitCount
{
get { return splitCount; }
set
{
if (value < 1)
return;
splitCount = value;
Refresh();
}
}
private int meterDegrees = 150;
/// <summary>
/// Gets or sets the meter degrees.
/// </summary>
/// <value>The meter degrees.</value>
[Description("表盤跨度角度，0-360"), Category("自定義")]
public int MeterDegrees
{
get { return meterDegrees; }
set
{
if (value > 360 || value <= 0)
return;
meterDegrees = value;
Refresh();
}
}
private decimal minValue = 0;
/// <summary>
/// Gets or sets the minimum value.
/// </summary>
/// <value>The minimum value.</value>
[Description("最小值,<MaxValue"), Category("自定義")]
public decimal MinValue
{
get { return minValue; }
set
{
if (value >= maxValue)
return;
minValue = value;
Refresh();
}
}
private decimal maxValue = 100;
/// <summary>
/// Gets or sets the maximum value.
/// </summary>
/// <value>The maximum value.</value>
[Description("最大值,>MinValue"), Category("自定義")]
public decimal MaxValue
{
get { return maxValue; }
set
{
if (value <= minValue)
return;
maxValue = value;
Refresh();
}
}
/// <summary>
/// 獲取或設置控件顯示的文字的字體。
/// </summary>
/// <value>The font.</value>
/// <PermissionSet>
/// <IPermission class="System.Security.Permissions.EnvironmentPermission, mscorlib, Version=2.0.3600.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" />
/// <IPermission class="System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.3600.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" />
/// <IPermission class="System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.3600.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Flags="UnmanagedCode, ControlEvidence" />
/// <IPermission class="System.Diagnostics.PerformanceCounterPermission, System, Version=2.0.3600.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" />
/// </PermissionSet>
[Description("刻度字體"), Category("自定義")]
public override Font Font
{
get
{
return base.Font;
}
set
{
base.Font = value;
Refresh();
}
}
private decimal m_value = 0;
/// <summary>
/// Gets or sets the value.
/// </summary>
/// <value>The value.</value>
[Description("值，>=MinValue并且<=MaxValue"), Category("自定義")]
public decimal Value
{
get { return m_value; }
set
{
if (value < minValue || value > maxValue)
return;
m_value = value;
Refresh();
}
}
private MeterTextLocation textLocation = MeterTextLocation.None;
/// <summary>
/// Gets or sets the text location.
/// </summary>
/// <value>The text location.</value>
[Description("值和固定文字顯示位置"), Category("自定義")]
public MeterTextLocation TextLocation
{
get { return textLocation; }
set
{
textLocation = value;
Refresh();
}
}
private string fixedText;
/// <summary>
/// Gets or sets the fixed text.
/// </summary>
/// <value>The fixed text.</value>
[Description("固定文字"), Category("自定義")]
public string FixedText
{
get { return fixedText; }
set
{
fixedText = value;
Refresh();
}
}
private Font textFont = DefaultFont;
/// <summary>
/// Gets or sets the text font.
/// </summary>
/// <value>The text font.</value>
[Description("值和固定文字字體"), Category("自定義")]
public Font TextFont
{
get { return textFont; }
set
{
textFont = value;
Refresh();
}
}
private Color externalRoundColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the external round.
/// </summary>
/// <value>The color of the external round.</value>
[Description("外圓顏色"), Category("自定義")]
public Color ExternalRoundColor
{
get { return externalRoundColor; }
set
{
externalRoundColor = value;
Refresh();
}
}
private Color insideRoundColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the inside round.
/// </summary>
/// <value>The color of the inside round.</value>
[Description("內圓顏色"), Category("自定義")]
public Color InsideRoundColor
{
get { return insideRoundColor; }
set
{
insideRoundColor = value;
Refresh();
}
}
private Color boundaryLineColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the boundary line.
/// </summary>
/// <value>The color of the boundary line.</value>
[Description("邊界線顏色"), Category("自定義")]
public Color BoundaryLineColor
{
get { return boundaryLineColor; }
set
{
boundaryLineColor = value;
Refresh();
}
}
private Color scaleColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the scale.
/// </summary>
/// <value>The color of the scale.</value>
[Description("刻度顏色"), Category("自定義")]
public Color ScaleColor
{
get { return scaleColor; }
set
{
scaleColor = value;
Refresh();
}
}
private Color scaleValueColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the scale value.
/// </summary>
/// <value>The color of the scale value.</value>
[Description("刻度值文字顏色"), Category("自定義")]
public Color ScaleValueColor
{
get { return scaleValueColor; }
set
{
scaleValueColor = value;
Refresh();
}
}
private Color pointerColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the pointer.
/// </summary>
/// <value>The color of the pointer.</value>
[Description("指針顏色"), Category("自定義")]
public Color PointerColor
{
get { return pointerColor; }
set
{
pointerColor = value;
Refresh();
}
}
private Color textColor = Color.FromArgb(255, 77, 59);
/// <summary>
/// Gets or sets the color of the text.
/// </summary>
/// <value>The color of the text.</value>
[Description("值和固定文字顏色"), Category("自定義")]
public Color TextColor
{
get { return textColor; }
set
{
textColor = value;
Refresh();
}
}
Rectangle m_rectWorking;
public UCMeter()
{
this.SetStyle(ControlStyles.AllPaintingInWmPaint, true);
this.SetStyle(ControlStyles.DoubleBuffer, true);
this.SetStyle(ControlStyles.ResizeRedraw, true);
this.SetStyle(ControlStyles.Selectable, true);
this.SetStyle(ControlStyles.SupportsTransparentBackColor, true);
this.SetStyle(ControlStyles.UserPaint, true);
this.SizeChanged += UCMeter1_SizeChanged;
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.None;
this.Size = new Size(350, 200);
}
void UCMeter1_SizeChanged(object sender, EventArgs e)
{
m_rectWorking = new Rectangle(10, 10, this.Width - 20, this.Height - 20);
}
protected override void OnPaint(PaintEventArgs e)
{
base.OnPaint(e);
var g = e.Graphics;
g.SetGDIHigh();
//外圓
float fltStartAngle = -90 - (meterDegrees) / 2 + 360;
var r1 = new Rectangle(m_rectWorking.Location, new Size(m_rectWorking.Width, m_rectWorking.Width));
g.DrawArc(new Pen(new SolidBrush(externalRoundColor), 1), r1, fltStartAngle, meterDegrees);
//內圓
var r2 = new Rectangle(m_rectWorking.Left + (m_rectWorking.Width - m_rectWorking.Width / 4) / 2, m_rectWorking.Top + (m_rectWorking.Width - m_rectWorking.Width / 4) / 2, m_rectWorking.Width / 4, m_rectWorking.Width / 4);
g.DrawArc(new Pen(new SolidBrush(insideRoundColor), 1), r2, fltStartAngle, meterDegrees);
//邊界線
if (meterDegrees != 360)
{
float fltAngle = fltStartAngle - 180;
float intY = (float)(m_rectWorking.Top + m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - m_rectWorking.Width / 8) * Math.Sin(Math.PI * (fltAngle / 180.00F))));
float intX = (float)(m_rectWorking.Left + (m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - m_rectWorking.Width / 8) * Math.Cos(Math.PI * (fltAngle / 180.00F)))));
float fltY1 = (float)(m_rectWorking.Top + m_rectWorking.Width / 2 - (m_rectWorking.Width / 8 * Math.Sin(Math.PI * (fltAngle / 180.00F))));
float fltX1 = (float)(m_rectWorking.Left + (m_rectWorking.Width / 2 - (m_rectWorking.Width / 8 * Math.Cos(Math.PI * (fltAngle / 180.00F)))));
g.DrawLine(new Pen(new SolidBrush(boundaryLineColor), 1), new PointF(intX, intY), new PointF(fltX1, fltY1));
g.DrawLine(new Pen(new SolidBrush(boundaryLineColor), 1), new PointF(m_rectWorking.Right - (fltX1 - m_rectWorking.Left), fltY1), new PointF(m_rectWorking.Right - (intX - m_rectWorking.Left), intY));
}
//分割線
int _splitCount = splitCount * 2;
float fltSplitValue = (float)meterDegrees / (float)_splitCount;
for (int i = 0; i <= _splitCount; i++)
{
float fltAngle = (fltStartAngle + fltSplitValue * i - 180) % 360;
float fltY1 = (float)(m_rectWorking.Top + m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2) * Math.Sin(Math.PI * (fltAngle / 180.00F))));
float fltX1 = (float)(m_rectWorking.Left + (m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2) * Math.Cos(Math.PI * (fltAngle / 180.00F)))));
float fltY2 = 0;
float fltX2 = 0;
if (i % 2 == 0)
{
fltY2 = (float)(m_rectWorking.Top + m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 10) * Math.Sin(Math.PI * (fltAngle / 180.00F))));
fltX2 = (float)(m_rectWorking.Left + (m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 10) * Math.Cos(Math.PI * (fltAngle / 180.00F)))));
if (!(meterDegrees == 360 && i == _splitCount))
{
decimal decValue = minValue + (maxValue - minValue) / _splitCount * i;
var txtSize = g.MeasureString(decValue.ToString("0.##"), this.Font);
float fltFY1 = (float)(m_rectWorking.Top - txtSize.Height / 2 + m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 20) * Math.Sin(Math.PI * (fltAngle / 180.00F))));
float fltFX1 = (float)(m_rectWorking.Left - txtSize.Width / 2 + (m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 20) * Math.Cos(Math.PI * (fltAngle / 180.00F)))));
g.DrawString(decValue.ToString("0.##"), Font, new SolidBrush(scaleValueColor), fltFX1, fltFY1);
}
}
else
{
fltY2 = (float)(m_rectWorking.Top + m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 5) * Math.Sin(Math.PI * (fltAngle / 180.00F))));
fltX2 = (float)(m_rectWorking.Left + (m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 5) * Math.Cos(Math.PI * (fltAngle / 180.00F)))));
}
g.DrawLine(new Pen(new SolidBrush(scaleColor), i % 2 == 0 ? 2 : 1), new PointF(fltX1, fltY1), new PointF(fltX2, fltY2));
}
//值文字和固定文字
if (textLocation != MeterTextLocation.None)
{
string str = m_value.ToString("0.##");
var txtSize = g.MeasureString(str, textFont);
float fltY = m_rectWorking.Top + m_rectWorking.Width / 4 - txtSize.Height / 2;
float fltX = m_rectWorking.Left + m_rectWorking.Width / 2 - txtSize.Width / 2;
g.DrawString(str, textFont, new SolidBrush(textColor), new PointF(fltX, fltY));
if (!string.IsNullOrEmpty(fixedText))
{
str = fixedText;
txtSize = g.MeasureString(str, textFont);
fltY = m_rectWorking.Top + m_rectWorking.Width / 4 + txtSize.Height / 2;
fltX = m_rectWorking.Left + m_rectWorking.Width / 2 - txtSize.Width / 2;
g.DrawString(str, textFont, new SolidBrush(textColor), new PointF(fltX, fltY));
}
}
//畫指針
g.FillEllipse(new SolidBrush(Color.FromArgb(100, pointerColor.R, pointerColor.G, pointerColor.B)), new Rectangle(m_rectWorking.Left + m_rectWorking.Width / 2 - 10, m_rectWorking.Top + m_rectWorking.Width / 2 - 10, 20, 20));
g.FillEllipse(Brushes.Red, new Rectangle(m_rectWorking.Left + m_rectWorking.Width / 2 - 5, m_rectWorking.Top + m_rectWorking.Width / 2 - 5, 10, 10));
float fltValueAngle = (fltStartAngle + ((float)(m_value - minValue) / (float)(maxValue - minValue)) * (float)meterDegrees - 180) % 360;
float intValueY1 = (float)(m_rectWorking.Top + m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 30) * Math.Sin(Math.PI * (fltValueAngle / 180.00F))));
float intValueX1 = (float)(m_rectWorking.Left + (m_rectWorking.Width / 2 - ((m_rectWorking.Width / 2 - 30) * Math.Cos(Math.PI * (fltValueAngle / 180.00F)))));
g.DrawLine(new Pen(new SolidBrush(pointerColor), 3), intValueX1, intValueY1, m_rectWorking.Left + m_rectWorking.Width / 2, m_rectWorking.Top + m_rectWorking.Width / 2);
}
}
/// <summary>
/// Enum MeterTextLocation
/// </summary>
public enum MeterTextLocation
{
/// <summary>
/// The none
/// </summary>
None,
/// <summary>
/// The top
/// </summary>
Top,
/// <summary>
/// The bottom
/// </summary>
Bottom
}
}
最后的話
如果你喜歡的話，請到 https://gitee.com/kwwwvagaa/net_winform_custom_control 點個星星吧
總結
以上所述是小編給大家介紹的c# Winform自定義控件-儀表盤功能,希望對大家有所幫助，如果大家有任何疑問請給我留言，小編會及時回復大家的。在此也非常感謝大家對腳本之家網站的支持！
如果你覺得本文對你有幫助，歡迎轉載，煩請注明出處，謝謝！
您可能感興趣的文章:
相關文章
這篇文章主要介紹了c#哈希算法的實現方法及思路，有需要的朋友可以參考一下2013-12-12
這篇文章主要介紹了C#中獲取、生成隨機數的三種方法,本文講解了Random 類生成法、Guid 類生成法以及RNGCryptoServiceProvider 類生成法,需要的朋友可以參考下2015-07-07
C#實現對二維數組排序的方法
這篇文章主要介紹了C#實現對二維數組排序的方法,實例分析了C#數組遍歷與排序的相關技巧,需要的朋友可以參考下2015-06-06![C# char[]與string byte[]與string之間的轉換詳解](http://img.jbzj.com/images/xgimg/bcimg3.png)
C# char[]與string byte[]與string之間的轉換詳解
在本篇文章里小編給大家分享的是關于C# char[]與string byte[]與string之間的轉換的知識點內容，需要的朋友們參考下2019-11-11
這篇文章主要介紹了Asp.Net MVC的Bundle捆綁方法，具體實現方法給大家做代碼整理，一起參考一下。2017-11-11
c#調用qq郵箱smtp發送郵件修改版代碼分享
c#調用qq郵箱發送郵件的方法，網上找到的有錯誤，這里修改了一下提供給大家使用2013-12-12
這篇文章主要為大家詳細介紹了C#實現十五子游戲的相關代碼，具有一定的參考價值，感興趣的小伙伴們可以參考一下2017-05-05
C#使用Lazy<T>實現對客戶訂單的延遲加載
這篇文章介紹了C#使用Lazy<T>實現對客戶訂單延遲加載的方法，文中通過示例代碼介紹的非常詳細。對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-08-08
C#類型系統從7.0到14.0的發展歷程和版本特性
C#類型系統從7.0到14.0的演進顯著提升了性能、類型安全性和開發效率,版本迭代中,值類型優化(如Span、記錄結構)顯著降低GC壓力,而可空引用和必需成員等特性增強了編譯時驗證,C# 14的field關鍵字和隱式span轉換進一步減少了高性能場景的樣板代碼2025-10-10
WPF使用觸發器需要注意優先級問題解決
本文主要介紹了WPF使用觸發器需要注意優先級問題解決，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2023-01-01