ORA-04031：unable to allocate … byters of shared memory("shared pool","unknown object","sga heap","db_block_buffers")
問題：
DELL服務器裝不上ORACLE8.1.5的問題，出現下面的錯誤提示是在建立數據庫之前，系統先要檢查內存時出現的，
ORA-04031:unable to allocate 85141440 byters of shared memory("shared pool","unknown object","sga heap","db_block_buffers")，是不是內存不夠？但實際物理內存是2G?什么原因呢？
解答：
在安裝時，把SGA區、JAVA池等東西的內存配小一些
ORA-01092 : Oracle instance terminated disconnection forced錯誤
Problem:
Your Oracle Server database on OpenVMS crashes. The following errors are reported: Background process DBWR unexpectedly terminated with error 1092
ORA-1092 Oracle instance terminated
ORA-313 open failed for members of log group 'n' of thread 'n'
ORA-600 [3228] reported from a PL/SQL script.
Explanation:
The most significant error reported here is the ORA-313 error. This error indicates a failure to open a file which indicates a problem with OpenVMS resources. When either CHANNELCNT and/or FILLM are too small, these errors can result.
Solution:
Increase the SYSGEN parameter CHANNELCNT. This should be done by an OpenVMS system manager and requires a reboot of your OpenVMS node. For more information on SYSGEN, please review the OpenVMS documentation.
If the CHANNELCNT parameter is already large enough to allow the expected number of files to be opened, check the FILLM quota. Review two areas when you check FILLM:
1) The Oracle background processes (PMON, DBWR, LGWR etc.)
2) The SERVER side (or SHADOW) process created when you use SVRMGRL to start the database. To get an idea of the quota available, use the command: $ SHOW PROCESS /QUOTA /ID=<pid> Where <pid> is the OpenVMS pid of the process to be reviewed. This command displays the remaining 'Open file quota' (FILLM) for the process, as well as other available quotas.
Example:
You have 226 data files, eight REDO log files and three control files for a total of 237 files. The SYSGEN setting for CHANNELCNT is at the default of 256. During normal operation, Oracle periodically needs to open additional files. These include the INIT parameter files, the ALERT log, various DCL scripts, trace files, etc. Under these conditions, a CHANNELCNT value of 256 is too small to accommodate the number of files that Oracle/OpenVMS needs open at the same time.
For most systems the default quotas should be adequate.
If not, please describe the infor u've encountered
ORA-00059錯誤及字符集修改
問題：在DBA studio中下的例程‘?dāng)?shù)據庫'自動變?yōu)橐褑?dòng)，無法裝載也無法打開，提示‘ORA-00059？？LOG--FILES？？？？'在這種情況下如果不卸載重裝解決，能有其它的辦法嗎？
一般來說ORA-00059多出現maximum number of DB_FILES exceeded的錯誤,由于你機器上的字符集設置有些問題,所以 錯誤提示 變成了??,(字符集設置不對照成的) 雖然看的出于問題可能和Log file有關,但不確定.請修改Oracle的字符集
[字符集修改方法]
SQL> desc props$
列名 可空值否 類型
------------------------------- -------- ----
NAME NOT NULL VARCHAR2(30)
VALUE$ VARCHAR2(2000)
COMMENT$ VARCHAR2(2000)
SQL> col value$ format a40
SQL> select name,value$ from props$;
NAME VALUE$
------------------------------ -------------------------
DICT.BASE 2
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY$
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS.,
NLS_DATE_FORMAT DD-MON-YY
NLS_DATE_LANGUAGE AMERICAN
NLS_CHARACTERSET ZHS16GBK
NLS_SORT BINARY
NLS_CALENDAR GREGORIAN
NLS_RDBMS_VERSION 7.3.4.0.0
GLOBAL_DB_NAME ORACLE.WORLD
EXPORT_VIEWS_VERSION 3
查詢到14記錄.
NLS_CHARACTERSET這個參數應該是ZHS16GBK，如不是，改為它。
ORA-12203:TNS:unable to connect destination錯誤
問題：
在Windows2000下安裝8.0.5，選擇none，沒有建立實例，為什么在執行svrmgr30 時報告Ora-12203:tns:unable to connect destination!
解答：
因?yàn)闆](méi)有創建實例，也就沒有環境變量。可參考“手工創建數據庫的全部腳本和說明”。
注意其中：
set ORACLE_SID=test
D:\Oracle\Ora81\bin\oradim -new -sid test -startmode manual -pfile "D:\Oracle\admin\test\pfile\inittest.ora"
Ora-12571：TNS：包寫入程序失敗

把虛擬內存設的大一些
Ora-12705錯誤
Cause: There are two possible causes: Either an attempt was made to issue an ALTER SESSION statement with an invalid NLS parameter or value; or the NLS_LANG environment variable contains an invalid language, territory, or character set.
Action: Check the syntax of the ALTER SESSION command and the NLS parameter, correct the syntax and retry the statement, or specify correct values in the NLS_LANG environment variable. For more information about the syntax of the ALTER SESSION command, see Oracle8i SQL Reference.
ORA-03113：通信通道的文件結束
Cause:
An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the SQL*Net, two task, software. This message could occur if the shadow two-task process associated with a SQL*Net connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action:
If this message occurs during a connection attempt, check the setup files for the appropriate SQL*net driver and confirm SQL*Net software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Explanation:
There are numerous causes of this error. It is a 'catch all' type error which means 'I cannot communicate with the Oracle shadow process'. This usually occurs when the Oracle server process has died for some reason.
ORA-12515：TNS：監聽進程無法找到該演示文稿的句柄
解決方案是檢查目標服務器網絡配置，并使其接受HTTP的協議。如果你是使用一般數據使用，建議使用新的數據庫實例。
ORA-01031：insufficient privileges
Cause: An attempt was made to change the current username or password without the appropriate privilege. This error also occurs if attempting to install a database without the necessary operating system privileges. When Trusted Oracle is configure in DBMS MAC, this error may occur if the user was granted the necessary privilege at a higher label than the current login.
Action: Ask the database administrator to perform the operation or grant the required privileges. For Trusted Oracle users getting this error although granted the appropriate privilege at a higher label, ask the database administrator to regrant the privilege at the appropriate label.
ORA-01017：invalid username/password; logon denied
Cause: An invalid username or password was entered in an attempt to log on to Oracle. The username and password must be the same as was specified in a GRANT CONNECT statement. If the username and password are entered together, the format is: username/password.
Action: Enter a valid username and password combination in the correct format.
問題：ORACLE8.1.7.0.0版本，，不知是哪里的問題，用internal 和 system 都無法登陸，錯誤提示：ORA1031 、ORA1017
解答：還有沒有其他DBA身份的用戶，如果有，最好登陸進去，然后alter user system identified by YOURPASSWORD; 你的系統密碼被人修改了
ORA-03121：沒連接接口驅動程序
Cause: This message occurs usually because the Net8 driver is not loaded into memory or there is a mismatch of the version of the driver. A user program linked with an obsolete library may also cause this message. Only programs provided by Oracle Corporation should use this interface.
Action: If the message occurred during use of a program provided by Oracle Corporation, contact Oracle Support Services. If a user program caused the message, relink the program with current versions of the Oracle libraries.
ORA-12638：憑證檢索失敗
問題：
2000ad server SP2 具域網，在網絡連接的情況下按裝ORACLE8I，到創建數據庫，初始化數據庫時，提示“ORA-12638 憑證檢索失敗”，裝了幾次都是這樣
解答：
憑證檢索失敗的錯誤一般都與網絡用戶集成有關，ORACLE中對于這個問題的管理是在SQLNET.ORA文件的SQLNET.AUTHENTICATION_SERVICES進行控制的，默認安裝都是SQLNET.AUTHENTICATION_SERVICES= (NTS)表示安裝ORACLE的用戶是通過操作系統的集成認證控制的，所以，我們只要把這個參數值屏蔽掉就行了。
修改\Oracle\Ora81\network\ADMIN目錄下SQLNET.ORA文件的SQLNET.AUTHENTICATION_SERVICES= (NTS)為# SQLNET.AUTHENTICATION_SERVICES= (NTS)
ORA-00604: error occurred at recursive SQL level 2
Cause: An error occurred while processing a recursive SQL statement (a statement applyingto internal dictionary tables).
Action: If the situation described in the next error on the stack can be corrected, do
so; otherwise contact Oracle Customer Support.
ORA-04030 out of process memory when trying to allocate string bytes (string,string)
Cause: Operating system process private memory has been exhausted.
Action: See the database administrator or operating system administrator to increase process memory quota. There may be a bug in the application that causes excessive allocations of process memory space.
ORA-04031：unable to allocate string bytes of shared memory("string","string","string","string")
Cause: More shared memory is needed than was allocated in the shared pool.
Action: If the shared pool is out of memory, either use the DBMS_SHARED_POOL package topin large packages, reduce your use of shared memory, or increase the amount ofavailable shared memory by increasing the value of the initialization parametersSHARED_POOL_RESERVED_SIZE and SHARED_POOL_SIZE. If the large pool is out of memory,increase the initialization parameter LARGE_POOL_SIZE.
ORA-01555：snapshot too old: rollback segment number 9 with name "USER_RS5" too small
問題：一個存儲過程執行的數據大概有100萬條，在執行到幾十萬條的時候，遇到了如上異常。
解答：原因有兩個方面：
1、由于你的這個操作執行的時間太長，導致SNAP SHOT失效（太老了），導致你的操作失??；
2、你的RBS太小，無法容納那么多的操作。
處理方法：
1、加大回滾段的大小（增加RBS表空間，修改回滾段的參數等）
2、你這種編程方法有問題，如果第一個方法不能解決問題，說明是因?yàn)閳?zhí)行時間過長，SNAPSHOT失效，需要你調整一下程序。是不是先把100萬記錄讀到內存里（內存不夠，可以采用文件作為緩沖），然后再做處理。也可以采用分段處理的方法，一次處理10萬條。
ORA-01589：must use RESETLOGS or NORESETLOGS option for database open
問題：在startup 之后出現錯誤提示
解答：
Cause: Either incomplete or backup control file recovery has been performed. After these types of recovery you must specify either the RESETLOGS option or the NORESETLOGS option to open your database.
Action: Specify the appropriate option.
你的數據庫以前做過Media Recovery，用OPEN DATABASE RESETLOGS或OPEN DATABASE NORESETLOGS打開數據庫就可以了。
ORA-01017：invalid username/password; logon denied
Cause: An invalid username or password was entered in an attempt to log on to Oracle. The username and password must be the same as was specified in a GRANT CONNECT statement. If the username and password are entered together, the format is: username/password.
Action: Enter a valid username and password combination in the correct format.
缺省密碼
8i：
scott/tiger
internal/change_on_install
system/manager
sys/oralce(密碼也可能是manager或change_on_install)
9i：
scott/tiger
sys/change_on_install
OEM的用戶名/密碼：sysman/oem_temp
重設system用戶的密碼
可以通過以下方法登陸
sqlplus /nolog
conn / as sysdba
alter user system identifed by '123'
Oracle的密碼文件
8i一般位于$ORACLE_HOME/PRODUCT/8.1.6/DBS/ORAPWD_[SID].ORA
如何激活用戶
8i：在DBA Studio里面，有“用戶”--然后找到用戶名--->然后選中“未鎖定”就可以了
Oracle的初始化文件
8i：安裝時設定的ORACLEHOME的目錄下會有：admin、oradata和ora81三個目錄，其中在admin目錄下的你安裝的數據庫目錄下的Prfile下的init.ora就是。
9i：在原來的目錄下看不到init文件了。不過你可以這樣：
create pfile from spfile;
這樣就可以看到init的文件了，因?yàn)?i里面的初始化文件有點變化。
Oracle 數據庫自帶數據的生成腳本
\ORACLE_HOME\rdbms\admin\SCOTT.SQL