PostgreSQL流復制參數max_wal_senders的用法說明
環境：
PostgreSQL 9.2.4
主機:192.25.10.76
從機:192.25.10.71
做postgresql的流復制主從時，會遇到調整max_wal_sengers這個參數，官方文檔對這個參數做了一個簡要的說明(9.2.4比早先版本多了幾句話并做了一些微調)，但沒有實際的例子。
1.參數說明：
Specifies the maximum number of concurrent connections from standby servers or streaming base backup clients (i.e., the maximum number of simultaneously running WAL sender processes). The default is zero, meaning replication is disabled. WAL sender processes count towards the total number of connections, so the parameter cannot be set higher than max_connections. This parameter can only be set at server start. wal_level must be set to archive or hot_standby to allow connections from standby servers.
也就是說，這個參數是在主機上設置的，是從機連接到主機的并發連接數之總和，所以這個參數是個正整型。默認值是0，也即默認沒有流復制功能。該并發連接數從進程上看，就是各個wal sender進程數之和，可以通過ps -ef|grep senders來查看，所以該值不能超過系統的最大連接數(max_connections，該BUG在9.1.5被修復)，可以允許超過實際的流復制用戶數。該參數更改需要重啟DB，比如我只配了一個從機:
[postgres@ndb2 database]$ ps -ef|grep sender postgres 21257 21247 0 20:57 ? 00:00:00 postgres: wal sender process repuser 192.25.10.71(46161) streaming 0/4018ED8 postgres 22193 20949 0 23:02 pts/0 00:00:00 grep sender
2.異常情況
很多時候配置主從的時候會遺漏這個參數，或者沒有設置正確(比如實際配的從機數超過設置的連接數)，這個時候一般會報錯 number of requested standby connections exceeds max_wal_senders (currently X)： 備機上顯示的日志異常:
2013-08-12 20:53:42.132 CST,,,8859,,5208dad6.229b,1,,2013-08-12 20:53:42 CST,,0,FATAL,XX000,"could not connect to the primary server: FATAL: number of requested standby connections exceeds max_wal_senders (currently 0) ",,,,,,,,,"" 2013-08-12 20:53:47.137 CST,,,8861,,5208dadb.229d,1,,2013-08-12 20:53:47 CST,,0,FATAL,XX000,"could not connect to the primary server: FATAL: number of requested standby connections exceeds max_wal_senders (currently 0) ",,,,,,,,,"" 2013-08-12 20:53:52.142 CST,,,8862,,5208dae0.229e,1,,2013-08-12 20:53:52 CST,,0,FATAL,XX000,"could not connect to the primary server: FATAL: number of requested standby connections exceeds max_wal_senders (currently 0) ",,,,,,,,,"" 2013-08-12 20:53:57.148 CST,,,8864,,5208dae5.22a0,1,,2013-08-12 20:53:57 CST,,0,FATAL,XX000,"could not connect to the primary server: FATAL: number of requested standby connections exceeds max_wal_senders (currently 0) ",,,,,,,,,"
主機上顯示的日志異常:
receiver" 2013-08-12 20:43:26.937 CST,,,21064,"",5208d86e.5248,1,"",2013-08-12 20:43:26 CST,,0,LOG,00000,"connection received: host=192.25.10.71 port=46085",,,,,,,,,"" 2013-08-12 20:43:26.938 CST,"repuser","",21064,"192.25.10.71:46085",5208d86e.5248,2,"authentication",2013-08-12 20:43:26 CST,2/1195,0,LOG,00000,"replication connection authorized: user=repuser",,,,,,,,,"" 2013-08-12 20:43:26.938 CST,"repuser","",21064,"192.25.10.71:46085",5208d86e.5248,3,"startup",2013-08-12 20:43:26 CST,2/0,0,FATAL,53300,"number of requested standby connections exceeds max_wal_senders (currently 0)",,,,,,,,,"walreceiver" 2013-08-12 20:43:26.939 CST,"repuser","",21064,"192.25.10.71:46085",5208d86e.5248,4,"startup",2013-08-12 20:43:26 CST,,0,LOG,00000,"disconnection: session time: 0:00:00.002 user=repuser database= host=192.25.10.71 port=46085",,,,,,,,,"wa lreceiver" 2013-08-12 20:43:41.513 CST,,,21066,"",5208d87d.524a,1,"",2013-08-12 20:43:41 CST,,0,LOG,00000,"connection received: host=192.25.10.71 port=46086",,,,,,,,,"" 2013-08-12 20:43:41.514 CST,"repuser","",21066,"192.25.10.71:46086",5208d87d.524a,2,"authentication",2013-08-12 20:43:41 CST,2/1198,0,LOG,00000,"replication connection authorized: user=repuser",,,,,,,,,"" 2013-08-12 20:43:41.514 CST,"repuser","",21066,"192.25.10.71:46086",5208d87d.524a,3,"startup",2013-08-12 20:43:41 CST,2/0,0,FATAL,53300,"number of requested standby connections exceeds max_wal_senders (currently 0)",,,,,,,,,"walreceiver" 2013-08-12 20:43:41.515 CST,"repuser","",21066,"192.25.10.71:46086",5208d87d.524a,4,"startup",2013-08-12 20:43:41 CST,,0,LOG,00000,"disconnection: session time: 0:00:00.002 user=repuser database= host=192.25.10.71 port=46086",,,,,,,,,"wa lreceiver" ...
遇到如此問題，則需要檢查postgresql.conf文件的max _wal_senders參數了。
3.參數生效
文檔上說明需要重啟DB使之生效，如果動態使之生效會報錯如下：
[postgres@proxy1 ]$ psql psql (9.2.4) Type "help" for help. postgres=# show max_wal_senders ; max_wal_senders ----------------- 0 (1 row) postgres=# set max_wal_senders=1; ERROR: parameter "max_wal_senders" cannot be changed without restarting the server postgres=#
補充： postgresql基于流復制 (streaming replication)的warm-standby
實例一枚：
Primary:
l 歸檔設置：
Wal_level=archive Archive_mode=on archive_command = 'cp -i %p /data/pgsql/archived_wal/%f'
l 流復制相關設置：
max_wal_senders = '10' #啟動復制進程數量限制，必須大于0 max_replication_slots = '10' #為使用replication slot，必須大于0；replication slot作用是保證wal沒有同步到standby之前不能從pg_xlog移走； wal_keep_segments = '50' #指定pg_xlog中最少保留的wal數量 select pg_create_physical_replication_slot(‘gp1_a_slot'); #創建replication slot select * from pg_replication_slots; #查詢創建的replication slot
l 編輯pg_hba.conf
# Allow replication connections from localhost, by a user with the replication privilege. #host replication postgres 127.0.0.1/32 trust #host replication postgres ::1/128 trust local replication postgres trust host replication postgres 192.168.12.0/24 trust
l 聯機備份過程（基礎備份）
#touch /var/lib/pgsql/backup_in_progress
$psql –c "select pg_start_backup('hot_backup');"
$tar -cf /var/lib/pgsql/backup.tar /var/lib/pgsql/data/
$psql -c "select pg_stop_backup();"
#rm /var/lib/pgsql/backup_in_progress
tar -rf /var/lib/pgsql/backup.tar /var/lib/pgsql/archive/ #打包歸檔
實例：
psql -c "select pg_start_backup('pgbk10');"
tar -zcf pgbk10.tgz data/
psql -c "select pg_stop_backup();"
Standby：
l 編輯recovery.conf
standby_mode = 'on' primary_conninfo = 'host=192.168.12.38 port=5666 user=postgres' primary_slot_name='gp1_a_slot' #restore_command = 'cp /data/pgsql/archived_wal/%f %p' #archive_cleanup_command = 'pg_archivecleanup /data/pgsql/archived_wal %r'
l 將primary上的基礎備份傳輸?shù)絪tandby上
$scp primary: /var/lib/pgsql/backup.tar .
解壓備份到standby上的$PGDATA
l 啟動standby
$pg_ctl start –D $PGDATA
啟動standby后，postgres開始從primary上接收wal日志進行恢復，并且一直保持恢復狀態，psql不能登錄；
以上為個人經驗，希望能給大家一個參考，也希望大家多多支持腳本之家。如有錯誤或未考慮完全的地方，望不吝賜教。
相關文章
Linux 上 定時備份postgresql 數據庫的方法
這篇文章主要介紹了Linux 上 定時備份postgresql 數據庫的方法,本文給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2021-02-02
使用docker compose啟動postgresql的示例代碼
要在啟動 PostgreSQL 容器時執行特定的初始化文件,可以使用 Docker 的 docker-entrypoint-initdb.d 目錄,這個目錄下的 SQL 文件會在容器啟動時被自動執行,下面是如何修改 Docker Compose 配置文件,以便在啟動時執行初始化 SQL 腳本,需要的朋友可以參考下2024-10-10
PostgreSQL教程(一)：數據表詳解
這篇文章主要介紹了PostgreSQL教程(一)：數據表詳解表的定義、系統字段、表的修改、表的權限等4大部份內容,內容種包括表的創建、刪除、修改、字段的修改、刪除、主鍵和外鍵、約束添加修改刪除等,本文講解了,需要的朋友可以參考下2015-05-05
postgresql 實現查詢出的數據為空,則設為0的操作
這篇文章主要介紹了postgresql 實現查詢出的數據為空,則設為0的操作，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2021-01-01
這篇文章主要介紹了PostgreSQL教程(十七)：客戶端命令（1）,本文講解了createdb、dropdb、reindexdb、vacuumdb、createuser、dropuser等命令,需要的朋友可以參考下2015-05-05
Postgresql 查看SQL語句執行效率的操作
這篇文章主要介紹了Postgresql 查看SQL語句執行效率的操作，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2021-02-02
這篇文章主要介紹了PostgreSQL教程(二)：模式Schema詳解,本文講解了創建模式、public模式、權限、刪除模式、模式搜索路徑等內容,需要的朋友可以參考下2015-05-05
PostgreSQL 更新視圖腳本的注意事項說明
這篇文章主要介紹了PostgreSQL 更新視圖腳本的注意事項說明，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2021-01-01
隨著使用時間的增加，數據庫中的數據量也不斷增加，因此數據庫查詢?cè)絹碓铰＜铀贁?shù)據庫的方法很多，如添加特定的索引，將日志目錄換到單獨的磁盤分區，調整數據庫引擎的參數等。本文即將介紹的數據庫表分區即能達到此效果2021-06-06
PostgreSQL自定義函數并且調用方式
這篇文章主要介紹了PostgreSQL如何自定義函數并且調用，本文通過示例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2023-06-06