MySQL為何不建議使用默認值為null列
通常能聽到的答案是使用了NULL值的列將會使索引失效,但是如果實際測試過一下,你就知道IS NULL會使用索引.所以上述說法有漏洞.
著急的人拉到最下邊看結論
Preface
Null is a special constraint of columns.
The columns in table will be added null constrain if you do not define the column with “not null” key words explicitly
when creating the table.Many programmers like to define columns by default
because of the conveniences(reducing the judgement code of nullibility) what consequently
cause some uncertainty of query and poor performance of database.
NULL值是一種對列的特殊約束,我們創建一個新列時,如果沒有明確的使用關鍵字not null聲明該數據列,Mysql會默認的為我們添加上NULL約束.
有些開發人員在創建數據表時,由于懶惰直接使用Mysql的默認推薦設置.(即允許字段使用NULL值).而這一陋習很容易在使用NULL的場景中得出不確定的查詢結果以及引起數據庫性能的下降.
Introduce
Null is null means it is not anything at all,we cannot think of null is equal to ‘' and they are totally different.
MySQL provides three operators to handle null value:“IS NULL”,“IS NOT NULL”,"<=>" and a function ifnull().
IS NULL: It returns true,if the column value is null.
IS NOT NULL: It returns true,if the columns value is not null.
<=>: It's a compare operator similar with “=” but not the same.It returns true even for the two null values.
(eg. null <=> null is legal)
IFNULL(): Specify two input parameters,if the first is null value then returns the second one.
It's similar with Oracle's NVL() function.
NULL并不意味著什么都沒有,我們要注意 NULL 跟 ''(空值)是兩個完全不一樣的值.MySQL中可以操作NULL值操作符主要有三個.
- IS NULL
- IS NOT NULL
- <=> 太空船操作符,這個操作符很像=,select NULL<=>NULL可以返回true,但是select NULL=NULL返回false.
- IFNULL 一個函數.怎么使用自己查吧…反正我會了
Example
Null never returns true when comparing with any other values except null with “<=>”.
NULL通過任一操作符與其它值比較都會得到NULL,除了<=>.
(root@localhost mysql3306.sock)[zlm]>create table test_null(
-> id int not null,
-> name varchar(10)
-> );
Query OK, 0 rows affected (0.02 sec)
(root@localhost mysql3306.sock)[zlm]>insert into test_null values(1,'zlm');
Query OK, 1 row affected (0.00 sec)
(root@localhost mysql3306.sock)[zlm]>insert into test_null values(2,null);
Query OK, 1 row affected (0.00 sec)
(root@localhost mysql3306.sock)[zlm]>select * from test_null;
+----+------+
| id | name |
+----+------+
| 1 | zlm |
| 2 | NULL |
+----+------+
2 rows in set (0.00 sec)
(root@localhost mysql3306.sock)[zlm]>select * from test_null where name=null;
Empty set (0.00 sec)
(root@localhost mysql3306.sock)[zlm]>select * from test_null where name is null;
+----+------+
| id | name |
+----+------+
| 2 | NULL |
+----+------+
1 row in set (0.00 sec)
(root@localhost mysql3306.sock)[zlm]>select * from test_null where name is not null;
+----+------+
| id | name |
+----+------+
| 1 | zlm |
+----+------+
1 row in set (0.00 sec)
(root@localhost mysql3306.sock)[zlm]>select * from test_null where null=null;
Empty set (0.00 sec)
(root@localhost mysql3306.sock)[zlm]>select * from test_null where null<>null;
Empty set (0.00 sec)
(root@localhost mysql3306.sock)[zlm]>select * from test_null where null<=>null;
+----+------+
| id | name |
+----+------+
| 1 | zlm |
| 2 | NULL |
+----+------+
2 rows in set (0.00 sec)
//null<=>null always return true,it's equal to "where 1=1".
Null means “a missing and unknown value”.Let's see details below.
NULL代表一個不確定的值,就算是兩個NULL,它倆也不一定相等.(像不像C中未初始化的局部變量)
(root@localhost mysql3306.sock)[zlm]>SELECT 0 IS NULL, 0 IS NOT NULL, '' IS NULL, '' IS NOT NULL; +-----------+---------------+------------+----------------+ | 0 IS NULL | 0 IS NOT NULL | '' IS NULL | '' IS NOT NULL | +-----------+---------------+------------+----------------+ | 0 | 1 | 0 | 1 | +-----------+---------------+------------+----------------+ 1 row in set (0.00 sec) //It's not equal to zero number or vacant string. //In MySQL,0 means fasle,1 means true. (root@localhost mysql3306.sock)[zlm]>SELECT 1 = NULL, 1 <> NULL, 1 < NULL, 1 > NULL; +----------+-----------+----------+----------+ | 1 = NULL | 1 <> NULL | 1 < NULL | 1 > NULL | +----------+-----------+----------+----------+ | NULL | NULL | NULL | NULL | +----------+-----------+----------+----------+ 1 row in set (0.00 sec) //It cannot be compared with number. //In MySQL,null means false,too.
It truns null as a result if any expression contains null value.
任何有返回值的表達式中有NULL參與時,都會得到另外一個NULL值.
(root@localhost mysql3306.sock)[zlm]>select ifnull(null,'First is null'),ifnull(null+10,'First is null'),ifnull(concat('abc',null),'First is null');
+------------------------------+---------------------------------+--------------------------------------------+
| ifnull(null,'First is null') | ifnull(null+10,'First is null') | ifnull(concat('abc',null),'First is null') |
+------------------------------+---------------------------------+--------------------------------------------+
| First is null | First is null | First is null |
+------------------------------+---------------------------------+--------------------------------------------+
1 row in set (0.00 sec)
//null value needs to be disposed with ifnull() function,what usually causes sql statement more complex.
//As we all know,MySQL does not support funcion index.Therefore,indexes on the column may not be used.That's really worse.
It's diffrent when using count(*) & count(null column).
使用count(*) 或者 count(null column)結果不同,count(null column)<=count(*).
(root@localhost mysql3306.sock)[zlm]>select count(*),count(name) from test_null; +----------+-------------+ | count(*) | count(name) | +----------+-------------+ | 2 | 1 | +----------+-------------+ 1 row in set (0.00 sec) //count(*) returns all rows ignore the null while count(name) returns the non-null rows in column "name". //This will also leads to uncertainty if someone is unaware of the details above.
如果使用者對NULL屬性不熟悉,很容易統計出錯誤的結果.
When using distinct,group by,order by,all null values are considered as the same value.
雖然select NULL=NULL的結果為false,但是在我們使用distinct,group by,order by時,NULL又被認為是相同值.
(root@localhost mysql3306.sock)[zlm]>insert into test_null values(3,null); Query OK, 1 row affected (0.00 sec) (root@localhost mysql3306.sock)[zlm]>select distinct name from test_null; +------+ | name | +------+ | zlm | | NULL | +------+ 2 rows in set (0.00 sec) //Two rows of null value returned one and the result became two. (root@localhost mysql3306.sock)[zlm]>select name from test_null group by name; +------+ | name | +------+ | NULL | | zlm | +------+ 2 rows in set (0.00 sec) //Two rows of null value were put into the same group. //By default,group by will also sort the result(null row showed first). (root@localhost mysql3306.sock)[zlm]>select id,name from test_null order by name; +----+------+ | id | name | +----+------+ | 2 | NULL | | 3 | NULL | | 1 | zlm | +----+------+ 3 rows in set (0.00 sec) //Three rows were sorted(two null rows showed first).
MySQL supports to use index on column which contains null value(what's different from oracle).
MySQL中支持在含有NULL值的列上使用索引,但是Oracle不支持.這就是我們平時所說的如果列上含有NULL那么將會使索引失效.
嚴格來說,這句話對與MySQL來說是不準確的.
(root@localhost mysql3306.sock)[sysbench]>show tables;
+--------------------+
| Tables_in_sysbench |
+--------------------+
| sbtest1 |
| sbtest10 |
| sbtest2 |
| sbtest3 |
| sbtest4 |
| sbtest5 |
| sbtest6 |
| sbtest7 |
| sbtest8 |
| sbtest9 |
+--------------------+
10 rows in set (0.00 sec)
(root@localhost mysql3306.sock)[sysbench]>show create table sbtest1\G
*************************** 1. row ***************************
Table: sbtest1
Create Table: CREATE TABLE `sbtest1` (
`id` int(11) NOT NULL AUTO_INCREMENT,
`k` int(11) NOT NULL DEFAULT '0',
`c` char(120) NOT NULL DEFAULT '',
`pad` char(60) NOT NULL DEFAULT '',
PRIMARY KEY (`id`),
KEY `k_1` (`k`)
) ENGINE=InnoDB AUTO_INCREMENT=100001 DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
(root@localhost mysql3306.sock)[sysbench]>alter table sbtest1 modify k int null,modify c char(120) null,modify pad char(60) null;
Query OK, 0 rows affected (4.14 sec)
Records: 0 Duplicates: 0 Warnings: 0
(root@localhost mysql3306.sock)[sysbench]>insert into sbtest1 values(100001,null,null,null);
Query OK, 1 row affected (0.00 sec)
(root@localhost mysql3306.sock)[sysbench]>explain select id,k from sbtest1 where id=100001;
+----+-------------+---------+------------+-------+---------------+---------+---------+-------+------+----------+-------+
| id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+----+-------------+---------+------------+-------+---------------+---------+---------+-------+------+----------+-------+
| 1 | SIMPLE | sbtest1 | NULL | const | PRIMARY | PRIMARY | 4 | const | 1 | 100.00 | NULL |
+----+-------------+---------+------------+-------+---------------+---------+---------+-------+------+----------+-------+
1 row in set, 1 warning (0.00 sec)
(root@localhost mysql3306.sock)[sysbench]>explain select id,k from sbtest1 where k is null;
+----+-------------+---------+------------+------+---------------+------+---------+-------+------+----------+--------------------------+
| id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+----+-------------+---------+------------+------+---------------+------+---------+-------+------+----------+--------------------------+
| 1 | SIMPLE | sbtest1 | NULL | ref | k_1 | k_1 | 5 | const | 1 | 100.00 | Using where; Using index |
+----+-------------+---------+------------+------+---------------+------+---------+-------+------+----------+--------------------------+
1 row in set, 1 warning (0.00 sec)
//In the first query,the newly added row is retrieved by primary key.
//In the second query,the newly added row is retrieved by secondary key "k_1"
//It has been proved that indexes can be used on the columns which contain null value.
//column "k" is int datatype which occupies 4 bytes,but the value of "key_len" turn out to be 5.what's happed?Because null value needs 1 byte to store the null flag in the rows.
這個是我自己測試的例子.
mysql> select * from test_1; +-----------+------+------+ | name | code | id | +-----------+------+------+ | gaoyi | wo | 1 | | gaoyi | w | 2 | | chuzhong | wo | 3 | | chuzhong | w | 4 | | xiaoxue | dd | 5 | | xiaoxue | dfdf | 6 | | sujianhui | su | 99 | | sujianhui | NULL | 99 | +-----------+------+------+ 8 rows in set (0.00 sec) mysql> explain select * from test_1 where code is NULL; +----+-------------+--------+------------+------+---------------+------------+---------+-------+------+----------+-----------------------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra | +----+-------------+--------+------------+------+---------------+------------+---------+-------+------+----------+-----------------------+ | 1 | SIMPLE | test_1 | NULL | ref | index_code | index_code | 161 | const | 1 | 100.00 | Using index condition | +----+-------------+--------+------------+------+---------------+------------+---------+-------+------+----------+-----------------------+ 1 row in set, 1 warning (0.00 sec) mysql> explain select * from test_1 where code is not NULL; +----+-------------+--------+------------+-------+---------------+------------+---------+------+------+----------+-----------------------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra | +----+-------------+--------+------------+-------+---------------+------------+---------+------+------+----------+-----------------------+ | 1 | SIMPLE | test_1 | NULL | range | index_code | index_code | 161 | NULL | 7 | 100.00 | Using index condition | +----+-------------+--------+------------+-------+---------------+------------+---------+------+------+----------+-----------------------+ 1 row in set, 1 warning (0.00 sec) mysql> explain select * from test_1 where code='dd'; +----+-------------+--------+------------+------+---------------+------------+---------+-------+------+----------+-----------------------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra | +----+-------------+--------+------------+------+---------------+------------+---------+-------+------+----------+-----------------------+ | 1 | SIMPLE | test_1 | NULL | ref | index_code | index_code | 161 | const | 1 | 100.00 | Using index condition | +----+-------------+--------+------------+------+---------------+------------+---------+-------+------+----------+-----------------------+ 1 row in set, 1 warning (0.00 sec) mysql> explain select * from test_1 where code like "dd%"; +----+-------------+--------+------------+-------+---------------+------------+---------+------+------+----------+-----------------------+ | id | select_type | table | partitions | type | possible_keys | key | key_len | ref | rows | filtered | Extra | +----+-------------+--------+------------+-------+---------------+------------+---------+------+------+----------+-----------------------+ | 1 | SIMPLE | test_1 | NULL | range | index_code | index_code | 161 | NULL | 1 | 100.00 | Using index condition | +----+-------------+--------+------------+-------+---------------+------------+---------+------+------+----------+-----------------------+ 1 row in set, 1 warning (0.00 sec)
Summary 總結
null value always leads to many uncertainties when disposing sql statement.It may cause bad performance accidentally.
列中使用NULL值容易引發不受控制的事情發生,有時候還會嚴重托慢系統的性能.
例如:
null value will not be estimated in aggregate function() which may cause inaccurate results.
對含有NULL值的列進行統計計算,eg. count(),max(),min(),結果并不符合我們的期望值.
null value will influence the behavior of the operations such as “distinct”,“group by”,“order by” which causes wrong sort.
干擾排序，分組,去重結果.
null value needs ifnull() function to do judgement which makes the program code more complex.
有的時候為了消除NULL帶來的技術債務,我們需要在SQL中使用IFNULL()來確保結果可控,但是這使程序變得復雜.
null value needs a extra 1 byte to store the null information in the rows.
NULL值并是占用原有的字段空間存儲,而是額外申請一個字節去標注,這個字段添加了NULL約束.(就像額外的標志位一樣)
As these above drawbacks,it's not recommended to define columns with default null.
We recommand to define “not null” on all columns and use zero number & vacant string to substitute relevant data type of null.
根據以上缺點,我們并不推薦在列中設置NULL作為列的默認值,你可以使用NOT NULL消除默認設置,使用0或者''空字符串來代替NULL.
參考資料
https://www.cnblogs.com/aaron8219/p/9259379.html
到此這篇關于MySQL為何不建議使用默認值為null列的文章就介紹到這了,更多相關MySQL默認值為null內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
MySQL中的索引可以為提高我們的查詢效率，相比較于低版本, MySQL 8.0中針對索引做了不少的優化，本文主要給大家分享一些MySQL8.0索引的新特性，希望大家可以在日常的開發中根據實際場景用起來2023-07-07
我相信平時大家一定會遇到忘記密碼的時候，實在記不起來了，我們就會重置密碼，最快最直接的方法，這篇文章就是主要介紹了linux系統中重置mysql的root密碼的方法，需要的朋友可以參考下2015-08-08
這篇文章主要討論MySQL選擇索引時單列單列索引和多列索引使用，以及多列索引的最左前綴原則,需要的朋友可以參考下2018-01-01
這篇文章主要介紹了mysql數據庫鎖的產生原因及解決辦法,需要的朋友可以參考下2016-01-01
這篇文章主要介紹了MYSQL日志的正確刪除方法,詳細分析了MySQL日志刪除的步驟與相關注意事項,需要的朋友可以參考下2016-04-04
這篇文章主要介紹了如何在mysql進行查詢緩存及失敗的解決方法，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2021-01-01
這篇文章主要介紹了mysql 5.7版本修改密碼的簡單方法,需要的朋友可以參考下2017-07-07
這篇文章主要給大家介紹了關于MySQL 8.0新特性之隱藏字段的相關資料，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2021-02-02
percona-toolkit對MySQL的復制和監控類操作教程
這篇文章主要介紹了使用percona-toolkit對MySQL進行復制和監控類操作的教程,percona-toolkit是一款強大的MySQL輔助軟件,需要的朋友可以參考下2015-11-11
這篇文章主要介紹了詳解MySQL中的存取權限,針對用戶使用數據庫權限分配的問題做出說明,需要的朋友可以參考下2015-07-07