%基于LBP特征提取的主程序代碼
clc; 
clear ;  
k = 2;
acc1 = 0;
acc2 = 0;
acc = 0;
%%  標簽制作  
ReadList1  = textread('pos_list.txt','%s','delimiter','\n');%載入正樣本列表  
sz1=size(ReadList1);   
label1=ones(sz1(1),1); %正樣本標簽  
ReadList2  = textread('neg_list.txt','%s','delimiter','\n');%載入負樣本列表
sz2=size(ReadList2);  
label2=zeros(sz2(1),1);%負樣本標簽  
label_train = [label1',label2'];%訓練集標簽
ReadList_pos = textread('pos_test_list.txt','%s','delimiter','\n');%載入測試正樣本列表  
sz_pos=size(ReadList_pos);   
label_pos=ones(sz_pos(1),1); %正樣本標簽
ReadList_neg  = textread('neg_test_list.txt','%s','delimiter','\n');%載入測試負樣本列表
sz_neg=size(ReadList_neg);  
label_neg=zeros(sz_neg(1),1);%負樣本標簽  
label_test = [label_pos',label_neg'];%測試集誤差
total_trainnum=length(label_train);  
total_testnum = length(label_test);
data1 = zeros(total_trainnum,256);  
data2 = zeros(total_testnum,256);
%% 提取特征
%讀取訓練集正樣本并計算lbp特征 
for i=1:sz1(1)
   name=char(ReadList1(i,1));  
   image1=imread(strcat('F:\模式識別matlab程序\模式識別大作業\yanwujiance\pos\',name));
    I=double(image1)/255;
   clu_kmeans=imkmeans(I,3);
   clu_pic=clu_kmeans/3;
   lbps = lbp(clu_pic);
   data1(i,:)=lbps;  
end
%讀取訓練集負樣本并計算lbp特征  
for j=1:sz2(1)
   name= char(ReadList2(j,1));  
   image2=imread(strcat('F:\模式識別matlab程序\模式識別大作業\yanwujiance\neg\',name));  
    I=double(image2)/255;
   clu_kmeans=imkmeans(I,3);
   clu_pic=clu_kmeans/3;
   lbps = lbp(clu_pic);
   data1(sz1(1)+j,:)=lbps;  
end
%讀取測試集正樣本并計算lbp特征
for m=1:sz_pos(1)
   test_name= char(ReadList_pos(m,1));  
   image3=imread(strcat('F:\模式識別matlab程序\模式識別大作業\yanwujiance\test\pos_test\',test_name));  
    I=double(image3)/255;
   clu_kmeans=imkmeans(I,3);
   clu_pic=clu_kmeans/3;
   lbpst= lbp(clu_pic);
   data2(m,:)=lbpst;  
end
%讀取測試集負樣本并計算lbp特征
for n =1:sz_neg(1)
    test_name=char(ReadList_neg(n,1)); 
    image4=imread(strcat('F:\模式識別matlab程序\模式識別大作業\yanwujiance\test\neg_test\',test_name));
     I=double(image4)/255;
   clu_kmeans=imkmeans(I,3);
   clu_pic=clu_kmeans/3;
   lbps = lbp(clu_pic);
    data2(sz_pos(1)+n,:)=lbpst; 
end
load data1
load data2
load svmStruct3
%數據降維
[COEFF SCORE latent]=princomp(data1(:,:));%訓練集數據降維
pcaData1 = SCORE(:,1:k);
latent = 100*latent/sum(latent);
for i = 1:8
latent(i+1) = latent(i+1)+latent(i)
end
plot(latent(1:8));%畫出前8個特征值所包含的圖像信息比例
x0 = bsxfun(@minus,data2,mean(data2,1));
pcaData2_sw = x0*COEFF(:,:);
pcaData2 = pcaData2_sw(:,1:k);
%%  評估方法：交叉驗證法
[train, test] = crossvalind('holdOut',label_train);   %隨機選擇訓練集合測試集
cp = classperf(label_train);  %評估分類器性能
svmStruct3hog = svmtrain(pcaData1(train,1:k),label_train(train));%訓練SVM分類器  
%使用svmtrain進行訓練,得到訓練后的結構svmStruct3hog,在預測時使用
save svmStruct3hog   %%保存 svmStruct3hog
cros = svmclassify(svmStruct3hog,pcaData1(test,1:k)); 
classperf(cp,cros ,test);  
cp.CorrectRate   
%% 測試
load svmStruct3hog
for i=1:sz_pos(1)
       classes = svmclassify(svmStruct3,pcaData2(i,:));%classes的值即為分類結果
       if classes==1
           acc1=acc1+1;%記錄正確分類的樣本數
       end
end
for j = sz_pos(1)+1:1383
       classes = svmclassify(svmStruct3,pcaData2(j,:));%classes的值即為分類結果
       if classes~=1
           acc2=acc2+1;%記錄正確分類的樣本數
       end
end 
acc = acc1+acc2;
fprintf('精確度為：%5.2f%%\n',(acc/(sz_neg(1)+sz_pos(1)))*100);%計算預測的正確率

%lbp特征提取代碼
function result = lbp(varargin) % image,radius,neighbors,mapping,mode)
% Check number of input arguments.
error(nargchk(1,5,nargin));
image=varargin{1};
d_image=double(image);
 
if nargin==1
    spoints=[-1 -1; -1 0; -1 1; 0 -1; -0 1; 1 -1; 1 0; 1 1];
    neighbors=8;
    mapping=0;
    mode='h';
end
 
if (nargin == 2) && (length(varargin{2}) == 1)
    error('Input arguments');
end
 
if (nargin > 2) && (length(varargin{2}) == 1)
    radius=varargin{2};
    neighbors=varargin{3};
    spoints=zeros(neighbors,2);
 
    % Angle step.
    a = 2*pi/neighbors;
    for i = 1:neighbors
        spoints(i,1) = -radius*sin((i-1)*a);
        spoints(i,2) = radius*cos((i-1)*a);
    end
   
    if(nargin >= 4)
        mapping=varargin{4};
        if(isstruct(mapping) && mapping.samples ~= neighbors)
            error('Incompatible mapping');
        end
    else
        mapping=0;
    end
   
    if(nargin >= 5)
        mode=varargin{5};
    else
        mode='h';
    end
end
 
 
if (nargin > 1) && (length(varargin{2}) > 1)
    spoints=varargin{2};
    neighbors=size(spoints,1);
   
    if(nargin >= 3)
        mapping=varargin{3};
        if(isstruct(mapping) && mapping.samples ~= neighbors)
            error('Incompatible mapping');
        end
    else
        mapping=0;
    end
   
    if(nargin >= 4)
        mode=varargin{4};
    else
        mode='h';
    end  
end
 
% Determine the dimensions of the input image.
[ysize xsize] = size(image);
 
miny=min(spoints(:,1));
maxy=max(spoints(:,1));
minx=min(spoints(:,2));
maxx=max(spoints(:,2));
 
% Block size, each LBP code is computed within a block of size bsizey*bsizex
bsizey=ceil(max(maxy,0))-floor(min(miny,0))+1;
bsizex=ceil(max(maxx,0))-floor(min(minx,0))+1;
 
 
% Coordinates of origin (0,0) in the block
origy=1-floor(min(miny,0));
origx=1-floor(min(minx,0));
 
 
% Minimum allowed size for the input image depends
% on the radius of the used LBP operator.
if(xsize < bsizex || ysize < bsizey)
  error('Too small input image. Should be at least (2*radius+1) x (2*radius+1)');
end
 
 
% Calculate dx and dy;
dx = xsize - bsizex;
dy = ysize - bsizey;
 
 
% Fill the center pixel matrix C.
C = image(origy:origy+dy,origx:origx+dx);
d_C = double(C);
 
 
bins = 2^neighbors;
 
 
% Initialize the result matrix with zeros.
result=zeros(dy+1,dx+1);
 
 
%Compute the LBP code image
 
 
for i = 1:neighbors
  y = spoints(i,1)+origy;
  x = spoints(i,2)+origx;
  % Calculate floors, ceils and rounds for the x and y.
  fy = floor(y); cy = ceil(y); ry = round(y);
  fx = floor(x); cx = ceil(x); rx = round(x);
  % Check if interpolation is needed.
  if (abs(x - rx) < 1e-6) && (abs(y - ry) < 1e-6)
    % Interpolation is not needed, use original datatypes
    N = image(ry:ry+dy,rx:rx+dx);
    D = N >= C;
  else
    % Interpolation needed, use double type images
    ty = y - fy;
    tx = x - fx;
 
 
    % Calculate the interpolation weights.
    w1 = (1 - tx) * (1 - ty);
    w2 =      tx  * (1 - ty);
    w3 = (1 - tx) *      ty ;
    w4 =      tx  *      ty ;
    % Compute interpolated pixel values
    N = w1*d_image(fy:fy+dy,fx:fx+dx) + w2*d_image(fy:fy+dy,cx:cx+dx) + ...
        w3*d_image(cy:cy+dy,fx:fx+dx) + w4*d_image(cy:cy+dy,cx:cx+dx);
    D = N >= d_C;
  end 
  % Update the result matrix.
  v = 2^(i-1);
  result = result + v*D;
end
 
 
%Apply mapping if it is defined
if isstruct(mapping)
    bins = mapping.num;
    for i = 1:size(result,1)
        for j = 1:size(result,2)
            result(i,j) = mapping.table(result(i,j)+1);
        end
    end
end
 
 
if (strcmp(mode,'h') || strcmp(mode,'hist') || strcmp(mode,'nh'))
    % Return with LBP histogram if mode equals 'hist'.
    result=hist(result(:),0:(bins-1));
    if (strcmp(mode,'nh'))
        result=result/sum(result);
    end
else
    %Otherwise return a matrix of unsigned integers
    if ((bins-1)<=intmax('uint8'))
        result=uint8(result);
    elseif ((bins-1)<=intmax('uint16'))
        result=uint16(result);
    else
        result=uint32(result);
    end
end
end

%k-means圖像聚類分割
function [F,C]=imkmeans(I,C)
% I:圖像矩陣,支持彩色或者灰度圖
% C:聚類中心，可以是整數或者數組，整數表示隨機選擇K個聚類中心
% F:樣本聚類編號
if nargin~=2
    error('IMKMEANS:InputParamterNotRight','只能有兩個輸入?yún)?shù)！');
end
if isempty(C)
    K=2;
    C=[];
elseif isscalar(C)
    K=C;
    C=[];
else
    K=size(C,1);
end
%% I.提取像素點特征向量
X=exactvecotr(I);
%% II.搜索初始聚類中心
if isempty(C)
    C=searchintial(X,'sample',K);
end
%% III.循環搜索聚類中心
Cprev=rand(size(C));
while true
    %計算樣本到中心的距離
    D=sampledist(X,C,'euclidean');
    %找出最近的聚類中心
    [~,locs]=min(D,[],2);
    %使用樣本均值更新中心
    for i=1:K
        C(i,:)=mean(X(locs==i,:),1);
    end
    %判斷聚類算法是否收斂
    if norm(C(:)-Cprev(:))<eps
        break
    end
    %保存上一次聚類中心
    Cprev=C;
end
[m,n,~]=size(I);
F=reshape(locs,[m,n]);