Ansible部署K8s集群的方法
更新時間：2022年02月28日 08:27:29 作者：wuenwuen
這篇文章主要介紹了Ansible部署K8s集群,本文給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下
環境：
| 主機 | IP地址 | 組件 |
|---|---|---|
| ansible | 192.168.175.130 | ansible |
| master | 192.168.175.140 | docker，kubectl，kubeadm，kubelet |
| node | 192.168.175.141 | docker，kubectl，kubeadm，kubelet |
| node | 192.168.175.142 | docker，kubectl，kubeadm，kubelet |
檢查及調試相關命令：
$ ansible-playbook -v k8s-time-sync.yaml --syntax-check $ ansible-playbook -v k8s-*.yaml -C $ ansible-playbook -v k8s-yum-cfg.yaml -C --start-at-task="Clean origin dir" --step $ ansible-playbook -v k8s-kernel-cfg.yaml --step
主機inventory文件：
/root/ansible/hosts
[k8s_cluster] master ansible_host=192.168.175.140 node1 ansible_host=192.168.175.141 node2 ansible_host=192.168.175.142 [k8s_cluster:vars] ansible_port=22 ansible_user=root ansible_password=hello123
檢查網絡：k8s-check.yaml檢查k8s各主機的網絡是否可達;
檢查k8s各主機操作系統版本是否達到要求；
- name: step01_check
hosts: k8s_cluster
gather_facts: no
tasks:
- name: check network
shell:
cmd: "ping -c 3 -m 2 {{ansible_host}}"
delegate_to: localhost
- name: get system version
shell: cat /etc/system-release
register: system_release
- name: check system version
vars:
system_version: "{{ system_release.stdout | regex_search('([7-9].[0-9]+).*?') }}"
suitable_version: 7.5
debug:
msg: "{{ 'The version of the operating system is '+ system_version +', suitable!' if (system_version | float >= suitable_version) else 'The version of the operating system is unsuitable' }}"調試命令：
$ ansible-playbook --ssh-extra-args '-o StrictHostKeyChecking=no' -v -C k8s-check.yaml $ ANSIBLE_HOST_KEY_CHECKING=False ansible-playbook -v -C k8s-check.yaml $ ANSIBLE_HOST_KEY_CHECKING=False ansible-playbook -v k8s-check.yaml --start-at-task="get system version"
- 連接配置：k8s-conn-cfg.yaml在
ansible服務器的/etc/hosts文件中添加k8s主機名解析配置 - 生成密鑰對，配置
ansible免密登錄到k8s各主機
- name: step02_conn_cfg
hosts: k8s_cluster
gather_facts: no
vars_prompt:
- name: RSA
prompt: Generate RSA or not(Yes/No)?
default: "no"
private: no
- name: password
prompt: input your login password?
default: "hello123"
tasks:
- name: Add DNS of k8s to ansible
delegate_to: localhost
lineinfile:
path: /etc/hosts
line: "{{ansible_host}} {{inventory_hostname}}"
backup: yes
- name: Generate RSA
run_once: true
shell:
cmd: ssh-keygen -t rsa -f ~/.ssh/id_rsa -N ''
creates: /root/.ssh/id_rsa
when: RSA | bool
- name: Configure password free login
shell: |
/usr/bin/ssh-keyscan {{ ansible_host }} >> /root/.ssh/known_hosts 2> /dev/null
/usr/bin/ssh-keyscan {{ inventory_hostname }} >> /root/.ssh/known_hosts 2> /dev/null
/usr/bin/sshpass -p'{{ password }}' ssh-copy-id root@{{ ansible_host }}
#/usr/bin/sshpass -p'{{ password }}' ssh-copy-id root@{{ inventory_hostname }}
- name: Test ssh
shell: hostname執行：
$ ansible-playbook k8s-conn-cfg.yaml Generate RSA or not(Yes/No)? [no]: yes input your login password? [hello123]: PLAY [step02_conn_cfg] ********************************************************************************************************** TASK [Add DNS of k8s to ansible] ************************************************************************************************ ok: [master -> localhost] ok: [node1 -> localhost] ok: [node2 -> localhost] TASK [Generate RSA] ************************************************************************************************************* changed: [master -> localhost] TASK [Configure password free login] ******************************************************************************************** changed: [node1 -> localhost] changed: [node2 -> localhost] TASK [Test ssh] ***************************************************************************************************************** changed: [master] changed: [node1] changed: [node2] PLAY RECAP ********************************************************************************************************************** master : ok=4 changed=3 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 node1 : ok=3 changed=2 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 node2 : ok=3 changed=2 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
配置k8s集群dns解析： k8s-hosts-cfg.yaml
設置主機名
/etc/hosts文件中互相添加dns解析
- name: step03_cfg_host
hosts: k8s_cluster
gather_facts: no
tasks:
- name: set hostname
hostname:
name: "{{ inventory_hostname }}"
use: systemd
- name: Add dns to each other
lineinfile:
path: /etc/hosts
backup: yes
line: "{{item.value.ansible_host}} {{item.key}}"
loop: "{{ hostvars | dict2items }}"
loop_control:
label: "{{ item.key }} {{ item.value.ansible_host }}"執行：
$ ansible-playbook k8s-hosts-cfg.yaml PLAY [step03_cfg_host] ********************************************************************************************************** TASK [set hostname] ************************************************************************************************************* ok: [master] ok: [node1] ok: [node2] TASK [Add dns to each other] **************************************************************************************************** ok: [node2] => (item=node1 192.168.175.141) ok: [master] => (item=node1 192.168.175.141) ok: [node1] => (item=node1 192.168.175.141) ok: [node2] => (item=node2 192.168.175.142) ok: [master] => (item=node2 192.168.175.142) ok: [node1] => (item=node2 192.168.175.142) ok: [node2] => (item=master 192.168.175.140) ok: [master] => (item=master 192.168.175.140) ok: [node1] => (item=master 192.168.175.140) PLAY RECAP ********************************************************************************************************************** master : ok=2 changed=0 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 node1 : ok=2 changed=0 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 node2 : ok=2 changed=0 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
配置yum源：k8s-yum-cfg.yaml
- name: step04_yum_cfg
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Create back-up directory
file:
path: /etc/yum.repos.d/org/
state: directory
- name: Back-up old Yum files
shell:
cmd: mv -f /etc/yum.repos.d/*.repo /etc/yum.repos.d/org/
removes: /etc/yum.repos.d/org/
- name: Add new Yum files
copy:
src: ./files_yum/
dest: /etc/yum.repos.d/
- name: Check yum.repos.d
cmd: ls /etc/yum.repos.d/*時鐘同步：k8s-time-sync.yaml
- name: step05_time_sync
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Start chronyd.service
systemd:
name: chronyd.service
state: started
enabled: yes
- name: Modify time zone & clock
shell: |
cp -f /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
clock -w
hwclock -w
- name: Check time now
command: date禁用iptable、firewalld、NetworkManager服務
- name: step06_net_service
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Stop some services for net
systemd:
name: "{{ item }}"
state: stopped
enabled: no
loop:
- firewalld
- iptables
- NetworkManager執行：
$ ansible-playbook -v k8s-net-service.yaml
... ...
failed: [master] (item=iptables) => {
"ansible_loop_var": "item",
"changed": false,
"item": "iptables"
}
MSG:
Could not find the requested service iptables: host
PLAY RECAP **********************************************************************************************************************
master : ok=0 changed=0 unreachable=0 failed=1 skipped=0 rescued=0 ignored=0
node1 : ok=0 changed=0 unreachable=0 failed=1 skipped=0 rescued=0 ignored=0
node2 : ok=0 changed=0 unreachable=0 failed=1 skipped=0 rescued=0 ignored=0禁用SElinux、swap：k8s-SE-swap-disable.yaml
- name: step07_net_service
hosts: k8s_cluster
gather_facts: no
tasks:
- name: SElinux disabled
lineinfile:
path: /etc/selinux/config
line: SELINUX=disabled
regexp: ^SELINUX=
state: present
backup: yes
- name: Swap disabled
path: /etc/fstab
line: '#\1'
regexp: '(^/dev/mapper/centos-swap.*$)'
backrefs: yes修改內核：k8s-kernel-cfg.yaml
- name: step08_kernel_cfg
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Create /etc/sysctl.d/kubernetes.conf
copy:
content: ''
dest: /etc/sysctl.d/kubernetes.conf
force: yes
- name: Cfg bridge and ip_forward
lineinfile:
path: /etc/sysctl.d/kubernetes.conf
line: "{{ item }}"
state: present
loop:
- 'net.bridge.bridge-nf-call-ip6tables = 1'
- 'net.bridge.bridge-nf-call-iptables = 1'
- 'net.ipv4.ip_forward = 1'
- name: Load cfg
shell:
cmd: |
sysctl -p
modprobe br_netfilter
removes: /etc/sysctl.d/kubernetes.conf
- name: Check cfg
cmd: '[ $(lsmod | grep br_netfilter | wc -l) -ge 2 ] && exit 0 || exit 3'執行：
$ ansible-playbook -v k8s-kernel-cfg.yaml --step
TASK [Check cfg] ****************************************************************************************************************
changed: [master] => {
"changed": true,
"cmd": "[ $(lsmod | grep br_netfilter | wc -l) -ge 2 ] && exit 0 || exit 3",
"delta": "0:00:00.011574",
"end": "2022-02-27 04:26:01.332896",
"rc": 0,
"start": "2022-02-27 04:26:01.321322"
}
changed: [node2] => {
"delta": "0:00:00.016331",
"end": "2022-02-27 04:26:01.351208",
"start": "2022-02-27 04:26:01.334877"
changed: [node1] => {
"delta": "0:00:00.016923",
"end": "2022-02-27 04:26:01.355983",
"start": "2022-02-27 04:26:01.339060"
PLAY RECAP **********************************************************************************************************************
master : ok=4 changed=4 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
node1 : ok=4 changed=4 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0
node2 : ok=4 changed=4 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0配置ipvs：k8s-ipvs-cfg.yaml
- name: step09_ipvs_cfg
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Install ipset and ipvsadm
yum:
name: "{{ item }}"
state: present
loop:
- ipset
- ipvsadm
- name: Load modules
shell: |
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
- name: Check cfg
shell:
cmd: '[ $(lsmod | grep -e -ip_vs -e nf_conntrack_ipv4 | wc -l) -ge 2 ] && exit 0 || exit 3'安裝docker：k8s-docker-install.yaml
- name: step10_docker_install
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Install docker-ce
yum:
name: docker-ce-18.06.3.ce-3.el7
state: present
- name: Cfg docker
copy:
src: ./files_docker/daemon.json
dest: /etc/docker/
- name: Start docker
systemd:
name: docker.service
state: started
enabled: yes
- name: Check docker version
shell:
cmd: docker --version安裝k8s組件[kubeadm\kubelet\kubectl]：k8s-install-kubepkgs.yaml
- name: step11_k8s_install_kubepkgs
hosts: k8s_cluster
gather_facts: no
tasks:
- name: Install k8s components
yum:
name: "{{ item }}"
state: present
loop:
- kubeadm-1.17.4-0
- kubelet-1.17.4-0
- kubectl-1.17.4-0
- name: Cfg k8s
copy:
src: ./files_k8s/kubelet
dest: /etc/sysconfig/
force: no
backup: yes
- name: Start kubelet
systemd:
name: kubelet.service
state: started
enabled: yes安裝集群鏡像：k8s-apps-images.yaml
- name: step12_apps_images
hosts: k8s_cluster
gather_facts: no
vars:
apps:
- kube-apiserver:v1.17.4
- kube-controller-manager:v1.17.4
- kube-scheduler:v1.17.4
- kube-proxy:v1.17.4
- pause:3.1
- etcd:3.4.3-0
- coredns:1.6.5
vars_prompt:
- name: cfg_python
prompt: Do you need to install docker pkg for python(Yes/No)?
default: "no"
private: no
tasks:
- block:
- name: Install python-pip
yum:
name: python-pip
state: present
- name: Install docker pkg for python
shell:
cmd: |
pip install docker==4.4.4
pip install websocket-client==0.32.0
creates: /usr/lib/python2.7/site-packages/docker/
when: cfg_python | bool
- name: Pull images
community.docker.docker_image:
name: "registry.cn-hangzhou.aliyuncs.com/google_containers/{{ item }}"
source: pull
loop: "{{ apps }}"
- name: Tag images
repository: "k8s.gcr.io/{{ item }}"
force_tag: yes
source: local
- name: Remove images for ali
state: absent執行：
$ ansible-playbook k8s-apps-images.yaml Do you need to install docker pkg for python(Yes/No)? [no]: PLAY [step12_apps_images] ******************************************************************************************************* TASK [Install python-pip] ******************************************************************************************************* skipping: [node1] skipping: [master] skipping: [node2] TASK [Install docker pkg for python] ******************************************************************************************** TASK [Pull images] ************************************************************************************************************** changed: [node1] => (item=kube-apiserver:v1.17.4) changed: [node2] => (item=kube-apiserver:v1.17.4) changed: [master] => (item=kube-apiserver:v1.17.4) changed: [node1] => (item=kube-controller-manager:v1.17.4) changed: [master] => (item=kube-controller-manager:v1.17.4) changed: [node1] => (item=kube-scheduler:v1.17.4) changed: [master] => (item=kube-scheduler:v1.17.4) changed: [node1] => (item=kube-proxy:v1.17.4) changed: [node2] => (item=kube-controller-manager:v1.17.4) changed: [master] => (item=kube-proxy:v1.17.4) changed: [node1] => (item=pause:3.1) changed: [master] => (item=pause:3.1) changed: [node2] => (item=kube-scheduler:v1.17.4) changed: [node1] => (item=etcd:3.4.3-0) changed: [master] => (item=etcd:3.4.3-0) changed: [node2] => (item=kube-proxy:v1.17.4) changed: [node1] => (item=coredns:1.6.5) changed: [master] => (item=coredns:1.6.5) changed: [node2] => (item=pause:3.1) changed: [node2] => (item=etcd:3.4.3-0) changed: [node2] => (item=coredns:1.6.5) TASK [Tag images] *************************************************************************************************************** ok: [node1] => (item=kube-apiserver:v1.17.4) ok: [master] => (item=kube-apiserver:v1.17.4) ok: [node2] => (item=kube-apiserver:v1.17.4) ok: [node1] => (item=kube-controller-manager:v1.17.4) ok: [master] => (item=kube-controller-manager:v1.17.4) ok: [node2] => (item=kube-controller-manager:v1.17.4) ok: [master] => (item=kube-scheduler:v1.17.4) ok: [node1] => (item=kube-scheduler:v1.17.4) ok: [node2] => (item=kube-scheduler:v1.17.4) ok: [master] => (item=kube-proxy:v1.17.4) ok: [node1] => (item=kube-proxy:v1.17.4) ok: [node2] => (item=kube-proxy:v1.17.4) ok: [master] => (item=pause:3.1) ok: [node1] => (item=pause:3.1) ok: [node2] => (item=pause:3.1) ok: [master] => (item=etcd:3.4.3-0) ok: [node1] => (item=etcd:3.4.3-0) ok: [node2] => (item=etcd:3.4.3-0) ok: [master] => (item=coredns:1.6.5) ok: [node1] => (item=coredns:1.6.5) ok: [node2] => (item=coredns:1.6.5) TASK [Remove images for ali] **************************************************************************************************** PLAY RECAP ********************************************************************************************************************** master : ok=3 changed=2 unreachable=0 failed=0 skipped=2 rescued=0 ignored=0 node1 : ok=3 changed=2 unreachable=0 failed=0 skipped=2 rescued=0 ignored=0 node2 : ok=3 changed=2 unreachable=0 failed=0 skipped=2 rescued=0 ignored=0
k8s集群初始化：k8s-cluster-init.yaml
- name: step13_cluster_init
hosts: master
gather_facts: no
tasks:
- block:
- name: Kubeadm init
shell:
cmd:
kubeadm init
--apiserver-advertise-address={{ ansible_host }}
--kubernetes-version=v1.17.4
--service-cidr=10.96.0.0/12
--pod-network-cidr=10.244.0.0/16
--image-repository registry.aliyuncs.com/google_containers
- name: Create /root/.kube
file:
path: /root/.kube/
state: directory
owner: root
group: root
- name: Copy /root/.kube/config
copy:
src: /etc/kubernetes/admin.conf
dest: /root/.kube/config
remote_src: yes
backup: yes
- name: Copy kube-flannel
src: ./files_k8s/kube-flannel.yml
dest: /root/
- name: Apply kube-flannel
cmd: kubectl apply -f /root/kube-flannel.yml
- name: Get token
cmd: kubeadm token create --print-join-command
register: join_token
- name: debug join_token
debug:
var: join_token.stdout到此這篇關于Ansible部署K8s集群的文章就介紹到這了,更多相關Ansible部署K8s集群內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
這篇文章主要為大家介紹了k8s編排之DaemonSet知識點詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2023-01-01
Podman開機自啟容器實現過程及與Docker對比
這篇文章主要為大家介紹了Podman開機自啟容器實現過程，通過示例代碼的形式進行演繹過程，有需要的朋友可以參考下，希望可以有所幫助2021-09-09
k8s?Ingress實現流量路由規則控制的定義格式類型
這篇文章主要為大家介紹了k8s?Ingress?實現流量路由規則控制的定義格式及類型詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2023-04-04
MinIO是一款高性能的分布式對象存儲系統,兼容Amazon S3協議,具有輕量級、易部署、高可用和可擴展性等優勢,它通過糾刪碼技術實現數據冗余與高容錯性,適用于私有云存儲、大數據分析和靜態資源托管等場景,本文介紹MinIO分布式文件存儲的相關知識,感興趣的朋友一起看看吧2025-03-03
這篇文章主要為大家介紹了k8s設置非強一致反親和性示例詳解,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-10-10
在Kubernetes集群中搭建Istio微服務網格的過程詳解
這篇文章主要介紹了在Kubernetes集群中搭建Istio微服務網格,我們采用default配置檔部署istio網格，istioctl?install命令不指定任何配置檔默認就是呀default配置檔，需要的朋友可以參考下2022-05-05
Rainbond云原生快捷部署生產可用的Gitlab步驟詳解
這篇文章主要為大家介紹了Rainbond云原生快捷部署生產可用的Gitlab步驟詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2022-04-04
Rainbond應用分享與發布官方文檔說明
這篇文章主要為大家介紹了Rainbond應用分享與發布的官方文檔說明，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2022-04-04
這篇文章主要介紹了Kubernetes安裝Jenkins,Jenkins插件可以在Kubernetes集群中運行動態jenkins-slave代理，基于Kubernetes的docker，自動化在Kubernetes中運行的Jenkins-slave代理的縮放，需要的朋友可以參考下2022-06-06
這篇文章主要為大家介紹了Kubernetes探針使用詳細介紹，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2022-03-03