Spring?Bean是如何初始化的詳解
更新時間：2022年03月22日 11:42:44 作者：xiaowu6666
Spring只Bean加載機制默認情況下是初始化容器的時候就會直接初始化,但是也取決于是否使用了懶加載,下面這篇文章主要給大家介紹了關于Spring?Bean是如何初始化的相關資料,需要的朋友可以參考下
前言
做Java都有很多年了，一直有一個疑惑： Spring 如何初始化bean，怎么調用反射實例化對象的，自己動手來解除這個疑惑。 過去我認為spring bean對象實例化一直都是由BeanPostProcessor接口實現類去做的，我就是不知道具體那個實現類，下面就去驗證下這個猜想。
三級緩存
為什么面試官特別喜歡問創建bean的三級緩存，主要是因為bean創建都是伴隨著三級緩存之間的轉換完成的，對象不同狀態分別存在不同緩存中，下面我會在分析代碼時，順便支持對象如何在緩存中流轉的。 先了解下spring 三級緩存。
/** 一級緩存 用于存放完全可以使用單例bean，也就是初始化完成并且注入所有依賴 */ private final Map<String, Object> singletonObjects = new ConcurrentHashMap<>(256); /** 二級緩存 過早暴露單例對象，此時bean剛剛完成初始化，未完成屬性注入和執行 init 方法 */ private final Map<String, Object> earlySingletonObjects = new ConcurrentHashMap<>(16); /** 三級緩存 裝載創建bean的工廠對象 */ private final Map<String, ObjectFactory<?>> singletonFactories = new HashMap<>(16)
三級緩存主要作用： 創建對象ObjectFactory首先放入三級換緩存中，當調用getObject 創建實例時，會將創建好對象加入二級緩存中，并且刪除三級中緩存，當對象已經完成初始化方法和屬性注入，再將緩存添加到一級緩存中，并且刪除二級緩存。
doGetBean
從源頭開始找，所有spring bean 初始化都是由AbstractBeanFactory.doGetBean方法實現的。下面我將源碼減除臃腫部分，貼出來。
protected <T> T doGetBean(
String name, @Nullable Class<T> requiredType, @Nullable Object[] args, boolean typeCheckOnly)
throws BeansException {
//name 前綴處理 beanFactory beanName 帶有&開頭
String beanName = transformedBeanName(name);
Object beanInstance;
//從三級緩存去取bean，三級中都沒有則返回null，說明對象還沒有創建
Object sharedInstance = getSingleton(beanName);
if (sharedInstance != null && args == null) { //如果緩存中bean 是FactoryBean實例，要通過接口獲取到實際bean
beanInstance = getObjectForBeanInstance(sharedInstance, name, beanName, null);
}
else {
//判斷bean對象標記是否正在創建中，如果正在創建中則不應該繼續下去，出現依賴循環就會出現這個錯誤
if (isPrototypeCurrentlyInCreation(beanName)) {
throw new BeanCurrentlyInCreationException(beanName);
}
BeanFactory parentBeanFactory = getParentBeanFactory();
// 檢查父容器是否存在，嘗試從父容器中獲取
if (parentBeanFactory != null && !containsBeanDefinition(beanName)) {
String nameToLookup = originalBeanName(name);
if (parentBeanFactory instanceof AbstractBeanFactory) {
return ((AbstractBeanFactory) parentBeanFactory).doGetBean(
nameToLookup, requiredType, args, typeCheckOnly);
}
else if (args != null) {
return (T) parentBeanFactory.getBean(nameToLookup, args);
}
else if (requiredType != null) {
return parentBeanFactory.getBean(nameToLookup, requiredType);
}
else {
return (T) parentBeanFactory.getBean(nameToLookup);
}
}
if (!typeCheckOnly) { //緩存中標記beanName 正在被創建
markBeanAsCreated(beanName);
}
StartupStep beanCreation = this.applicationStartup.start("spring.beans.instantiate")
.tag("beanName", name);
try {
if (requiredType != null) {
beanCreation.tag("beanType", requiredType::toString);
}
RootBeanDefinition mbd = getMergedLocalBeanDefinition(beanName);
checkMergedBeanDefinition(mbd, beanName, args);
// Guarantee initialization of beans that the current bean depends on.
String[] dependsOn = mbd.getDependsOn();
if (dependsOn != null) { //bean 中@DependsOn 信息，用于標記bean之間初始化順序，優先創建@DependsOn 中bean
for (String dep : dependsOn) {
if (isDependent(beanName, dep)) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName,
"Circular depends-on relationship between '" + beanName + "' and '" + dep + "'");
}
registerDependentBean(dep, beanName);
try {
getBean(dep);
}
catch (NoSuchBeanDefinitionException ex) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName,
"'" + beanName + "' depends on missing bean '" + dep + "'", ex);
}
}
}
//創建單例對象
if (mbd.isSingleton()) { //重點就在這里實例化對象 ，getSingleton 就是在這里將創建完成對象加入到一級緩存中
sharedInstance = getSingleton(beanName, () -> {
try {
return createBean(beanName, mbd, args);
}
catch (BeansException ex)
destroySingleton(beanName);
throw ex;
}
});
//如果生成bean 是FactoryBean ，再獲取真正的對象
beanInstance = getObjectForBeanInstance(sharedInstance, name, beanName, mbd);
}
//作用域 = prototype，因為不會放入緩存中，每次獲取都要重新創建
else if (mbd.isPrototype()) {
// It's a prototype -> create a new instance.
Object prototypeInstance = null;
try {
beforePrototypeCreation(beanName);
prototypeInstance = createBean(beanName, mbd, args);
}
finally {
afterPrototypeCreation(beanName);
}
beanInstance = getObjectForBeanInstance(prototypeInstance, name, beanName, mbd);
}
else { // session request 這些作用域，由作用域容器去管理這些對象
String scopeName = mbd.getScope();
if (!StringUtils.hasLength(scopeName)) {
throw new IllegalStateException("No scope name defined for bean ′" + beanName + "'");
}
Scope scope = this.scopes.get(scopeName);
if (scope == null) {
throw new IllegalStateException("No Scope registered for scope name '" + scopeName + "'");
}
try {
Object scopedInstance = scope.get(beanName, () -> {
beforePrototypeCreation(beanName);
try {
return createBean(beanName, mbd, args);
}
finally {
afterPrototypeCreation(beanName);
}
});
beanInstance = getObjectForBeanInstance(scopedInstance, name, beanName, mbd);
}
catch (IllegalStateException ex) {
throw new ScopeNotActiveException(beanName, scopeName, ex);
}
}
}
catch (BeansException ex) {
beanCreation.tag("exception", ex.getClass().toString());
beanCreation.tag("message", String.valueOf(ex.getMessage()));
cleanupAfterBeanCreationFailure(beanName);
throw ex;
}
finally {
beanCreation.end();
}
}
//返回初始化成功的對象，一個對象初始化就這樣完成的了
return adaptBeanInstance(name, beanInstance, requiredType);
}大概總結一下上面代碼流程：
- 先從三級緩存中獲取，如果緩存中都沒有。再去判斷是否存在父容器，從父容器中獲取。沒有正式進入bean 初始化流程，先根據beanName 獲取到RootBeanDefinition，bean類元信息、先處理dependsOn中bean，保證bean依賴的創建順序，下面會說明
org.springframework.context.annotation.@DependsOn這個注解。下一步按照不同scope 進行bean 對象初始化。初始化流程就是這樣，我們將目光放在單例bean 如何實例化，集中關注AbstractAutowireCapableBeanFactory.createBean獲取注冊一個單例對象
@DependsOn 注解意思是實例化某個對象依賴于某一個實例化，但是不需要持有這個實例對象。比如bean A上 需要依賴bean b才能實例化，但是bean b 不需要作為他的屬性，常常用于不同實例實例化順序標記。
看下getSingleton方法
public Object getSingleton(String beanName, ObjectFactory<?> singletonFactory) {
synchronized (this.singletonObjects) {
Object singletonObject = this.singletonObjects.get(beanName);
if (singletonObject == null) {
if (this.singletonsCurrentlyInDestruction) { //標記bean 是否在銷毀
throw new BeanCreationNotAllowedException(beanName,
"Singleton bean creation not allowed while singletons of this factory are in destruction " +
"(Do not request a bean from a BeanFactory in a destroy method implementation!)");
}
beforeSingletonCreation(beanName);
boolean newSingleton = false;
boolean recordSuppressedExceptions = (this.suppressedExceptions == null);
if (recordSuppressedExceptions) {
this.suppressedExceptions = new LinkedHashSet<>();
}
try {
singletonObject = singletonFactory.getObject();
newSingleton = true;
}
catch (IllegalStateException ex) {
}
catch (BeanCreationException ex) {
throw ex;
}
finally {
if (recordSuppressedExceptions) {
this.suppressedExceptions = null;
}
afterSingletonCreation(beanName);
}
if (newSingleton) {
addSingleton(beanName, singletonObject); //就是在這里刪除二三級緩存，提交到一級緩存
}
}
return singletonObject;
}
}
protected void addSingleton(String beanName, Object singletonObject) {
synchronized (this.singletonObjects) {
this.singletonObjects.put(beanName, singletonObject);
this.singletonFactories.remove(beanName);
this.earlySingletonObjects.remove(beanName);
this.registeredSingletons.add(beanName);
}
}添加到一級緩存則說明bean已經完成實例化，可以正常使用了。下面看下如何進行實例化和屬性注入的。
createBean
下面進入AbstractAutowireCapableBeanFactory.createBean
protected Object createBean(String beanName, RootBeanDefinition mbd, @Nullable Object[] args)
throws BeanCreationException {
RootBeanDefinition mbdToUse = mbd;
//克隆一份mbd => mbdToUse
Class<?> resolvedClass = resolveBeanClass(mbd, beanName);
if (resolvedClass != null && !mbd.hasBeanClass() && mbd.getBeanClassName() != null) {
mbdToUse = new RootBeanDefinition(mbd);
mbdToUse.setBeanClass(resolvedClass);
}
// Prepare method overrides.
try {
mbdToUse.prepareMethodOverrides();
}
catch (BeanDefinitionValidationException ex) {
throw new BeanDefinitionStoreException(mbdToUse.getResourceDescription(),
beanName, "Validation of method overrides failed", ex);
}
try {
// Give BeanPostProcessors a chance to return a proxy instead of the target bean instance.
//通過BeanPostProcessors 增強返回一個代理對象，這個生成AOP的代理對象，使用多個BeanPostProcessors來處理
Object bean = resolveBeforeInstantiation(beanName, mbdToUse);
if (bean != null) {
return bean;
}
}
catch (Throwable ex) {
throw new BeanCreationException(mbdToUse.getResourceDescription(), beanName,
"BeanPostProcessor before instantiation of bean failed", ex);
}
try {
// bean 對象實例化就這里實現
Object beanInstance = doCreateBean(beanName, mbdToUse, args);
return beanInstance;
}
catch (BeanCreationException | ImplicitlyAppearedSingletonException ex) {
throw ex;
}
catch (Throwable ex) {
throw new BeanCreationException(
mbdToUse.getResourceDescription(), beanName, "Unexpected exception during bean creation", ex);
}
}這里邏輯就比較簡單了 ，克隆一份RootBeanDefinition用于初始化對象，resolveBeforeInstantiation 主要用于初始化代理對象情況，主要使用BeanPostProcessor子類InstantiationAwareBeanPostProcessor實現方法去實現對象初始化，并且在實例化成功后在調用后置方法進行對象依賴注入，這里可以看見此方法返回對象直接跳出方法棧，這里可以看出單例和代理對象還是有區別的。單例對象初始化就在doCreateBean 實現了
doCreateBean
下面就是AbstractAutowireCapableBeanFactory.doCreateBean非常接近對象如何實例化的了
protected Object doCreateBean(String beanName, RootBeanDefinition mbd, @Nullable Object[] args)
throws BeanCreationException {
// Instantiate the bean.
BeanWrapper instanceWrapper = null;
if (mbd.isSingleton()) {
instanceWrapper = this.factoryBeanInstanceCache.remove(beanName);
}
if (instanceWrapper == null) {
instanceWrapper = createBeanInstance(beanName, mbd, args); //這個就是實例化方法
}
Object bean = instanceWrapper.getWrappedInstance();
Class<?> beanType = instanceWrapper.getWrappedClass();
if (beanType != NullBean.class) {
mbd.resolvedTargetType = beanType;
}
// 使用BeanDefinitionPostProcessors 對合并bean進行實例化
synchronized (mbd.postProcessingLock) {
if (!mbd.postProcessed) {
try {
applyMergedBeanDefinitionPostProcessors(mbd, beanType, beanName);
}
catch (Throwable ex) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName,
"Post-processing of merged bean definition failed", ex);
}
mbd.postProcessed = true;
}
}
// 這里就需要用到上面說的三級緩存知識了
// even when triggered by lifecycle interfaces like BeanFactoryAware.
boolean earlySingletonExposure = (mbd.isSingleton() && this.allowCircularReferences &&
isSingletonCurrentlyInCreation(beanName)); //是否放入第三級緩存中
if (earlySingletonExposure) {
if (logger.isTraceEnabled()) {
logger.trace("Eagerly caching bean '" + beanName +
"' to allow for resolving potential circular references");
}
addSingletonFactory(beanName, () -> getEarlyBeanReference(beanName, mbd, bean)); //將已經實例化的對象加入到第三級緩存 singletonFactories
}
// Initialize the bean instance.
Object exposedObject = bean;
try {
populateBean(beanName, mbd, instanceWrapper); //對屬性進入注入，下面會具體分析的
exposedObject = initializeBean(beanName, exposedObject, mbd); //執行初始化方法，或者注入Aware 接口bean
}
catch (Throwable ex) {
if (ex instanceof BeanCreationException && beanName.equals(((BeanCreationException) ex).getBeanName())) {
throw (BeanCreationException) ex;
}
else {
throw new BeanCreationException(
mbd.getResourceDescription(), beanName, "Initialization of bean failed", ex);
}
}
//下面代碼省略
//主要就是對設置了DisposableBean 接口銷毀鉤子方法處理
}這里代碼主要分成三部分
- 初始化實例，創建對象完成，并且添加到3級緩存。第3級緩存常常用于存儲代理對象，因為有些類需要動態代理方法，需要生成代理對象，會委派給第三級緩存方法ObjectFactroy去實現的，普通對象如果不需要會直接返回。
- 對實例化bean進行屬性注入
- 執行初始化方法，DisposableBean接口加入到disposableBeans容器中
instantiateBean
protected BeanWrapper createBeanInstance(String beanName, RootBeanDefinition mbd, @Nullable Object[] args) {
// Make sure bean class is actually resolved at this point.
Class<?> beanClass = resolveBeanClass(mbd, beanName);
if (beanClass != null && !Modifier.isPublic(beanClass.getModifiers()) && !mbd.isNonPublicAccessAllowed()) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName,
"Bean class isn't public, and non-public access not allowed: " + beanClass.getName());
}
Supplier<?> instanceSupplier = mbd.getInstanceSupplier();
if (instanceSupplier != null) {// 有實現Supplier 接口，由instanceSupplier.get() 方法創建實例
return obtainFromSupplier(instanceSupplier, beanName);
}
//factoryName 使用工廠模式創建bean，調用工廠方法去創建，這個支持靜態方法和factoryBean.invoke
if (mbd.getFactoryMethodName() != null) {
return instantiateUsingFactoryMethod(beanName, mbd, args);
}
// Shortcut when re-creating the same bean...
boolean resolved = false; //標記構造函數是否需要參數
boolean autowireNecessary = false; //標記構造方法的參數是否使用注入方式
if (args == null) {
synchronized (mbd.constructorArgumentLock) {
if (mbd.resolvedConstructorOrFactoryMethod != null) {
resolved = true;
autowireNecessary = mbd.constructorArgumentsResolved;
}
}
}
if (resolved) {
if (autowireNecessary) {
//使用構造函數注入方式實例化
return autowireConstructor(beanName, mbd, null, null);
}
else {
//實例化對象
return instantiateBean(beanName, mbd);
}
}
// 獲取構造函數參數
Constructor<?>[] ctors = determineConstructorsFromBeanPostProcessors(beanClass, beanName);
if (ctors != null || mbd.getResolvedAutowireMode() == AUTOWIRE_CONSTRUCTOR ||
mbd.hasConstructorArgumentValues() || !ObjectUtils.isEmpty(args)) {
return autowireConstructor(beanName, mbd, ctors, args);
}
// Preferred constructors for default construction?
ctors = mbd.getPreferredConstructors();
if (ctors != null) {
return autowireConstructor(beanName, mbd, ctors, null);
}
// No special handling: simply use no-arg constructor.
return instantiateBean(beanName, mbd);
}實例化方法instantiateBean最終會調用SimpleInstantiationStrategy.instantiate 進行實例化
instantiate
public Object instantiate(RootBeanDefinition bd, @Nullable String beanName, BeanFactory owner) {
// Don't override the class with CGLIB if no overrides.
if (!bd.hasMethodOverrides()) {
Constructor<?> constructorToUse;
synchronized (bd.constructorArgumentLock) {
constructorToUse = (Constructor<?>) bd.resolvedConstructorOrFactoryMethod;
if (constructorToUse == null) {
final Class<?> clazz = bd.getBeanClass();
if (clazz.isInterface()) {
throw new BeanInstantiationException(clazz, "Specified class is an interface");
}
try {
if (System.getSecurityManager() != null) {
constructorToUse = AccessController.doPrivileged(
(PrivilegedExceptionAction<Constructor<?>>) clazz::getDeclaredConstructor);
}
else {
constructorToUse = clazz.getDeclaredConstructor(); //獲取構造函數
}
bd.resolvedConstructorOrFactoryMethod = constructorToUse;
}
catch (Throwable ex) {
throw new BeanInstantiationException(clazz, "No default constructor found", ex);
}
}
}
return BeanUtils.instantiateClass(constructorToUse); //調用構造函數進行實例化
}
else {
// Must generate CGLIB subclass.
return instantiateWithMethodInjection(bd, beanName, owner);
}
}instantiateClass
@Override
public Object instantiate(RootBeanDefinition bd, @Nullable String beanName, BeanFactory owner) {
// Don't override the class with CGLIB if no overrides.
if (!bd.hasMethodOverrides()) {
Constructor<?> constructorToUse;
synchronized (bd.constructorArgumentLock) {
constructorToUse = (Constructor<?>) bd.resolvedConstructorOrFactoryMethod;
if (constructorToUse == null) {
final Class<?> clazz = bd.getBeanClass();
if (clazz.isInterface()) {
throw new BeanInstantiationException(clazz, "Specified class is an interface");
}
try {
if (System.getSecurityManager() != null) {
constructorToUse = AccessController.doPrivileged(
(PrivilegedExceptionAction<Constructor<?>>) clazz::getDeclaredConstructor);
}
else {
constructorToUse = clazz.getDeclaredConstructor();
}
bd.resolvedConstructorOrFactoryMethod = constructorToUse;
}
catch (Throwable ex) {
throw new BeanInstantiationException(clazz, "No default constructor found", ex);
}
}
}
return BeanUtils.instantiateClass(constructorToUse); //調用構造器進行初始化
}
else {
// Must generate CGLIB subclass.
return instantiateWithMethodInjection(bd, beanName, owner);
}
}這里要注意下先判斷bean是否有方法重寫的，沒有則使用反射生成的構造器，有就使用gclib方式創建代理對象，具體實現方式就在org.springframework.beans.factory.support.SimpleInstantiationStrategy.instantiate，有興趣同學可以去學習下。 到此一個簡單bean實例化完成了。
注入
下面進入IOC另一個特點，bean注入，先從AbstractAutowireCapableBeanFactory.populateBean方法開始
protected void populateBean(String beanName, RootBeanDefinition mbd, @Nullable BeanWrapper bw) {
// Give any InstantiationAwareBeanPostProcessors the opportunity to modify the
// state of the bean before properties are set. This can be used, for example,
// to support styles of field injection.
//通過InstantiationAwareBeanPostProcessors.postProcessAfterInstantiation 如果返回true，目標實例內部的返回值會被populate，否則populate這個過程會被忽視
//翻譯說如果返回true可以執行字段注入 真的6666啊
if (!mbd.isSynthetic() && hasInstantiationAwareBeanPostProcessors()) {
for (InstantiationAwareBeanPostProcessor bp : getBeanPostProcessorCache().instantiationAware) {
if (!bp.postProcessAfterInstantiation(bw.getWrappedInstance(), beanName)) {
return;
}
}
}
PropertyValues pvs = (mbd.hasPropertyValues() ? mbd.getPropertyValues() : null);
//獲取注入方式分布有4種
int resolvedAutowireMode = mbd.getResolvedAutowireMode();
if (resolvedAutowireMode == AUTOWIRE_BY_NAME || resolvedAutowireMode == AUTOWIRE_BY_TYPE) {
MutablePropertyValues newPvs = new MutablePropertyValues(pvs);
// Add property values based on autowire by name if applicable.
if (resolvedAutowireMode == AUTOWIRE_BY_NAME) {
autowireByName(beanName, mbd, bw, newPvs);
}
// Add property values based on autowire by type if applicable.
if (resolvedAutowireMode == AUTOWIRE_BY_TYPE) {
autowireByType(beanName, mbd, bw, newPvs);
}
pvs = newPvs;
}
boolean hasInstAwareBpps = hasInstantiationAwareBeanPostProcessors();
//依賴方式，模式都是沒有類型檢查，這種依賴方式一般都是xml 配置用得比較多，沒有配置這里都是返回false
boolean needsDepCheck = (mbd.getDependencyCheck() != AbstractBeanDefinition.DEPENDENCY_CHECK_NONE); /
PropertyDescriptor[] filteredPds = null;
if (hasInstAwareBpps) {
if (pvs == null) {
pvs = mbd.getPropertyValues();
}
for (InstantiationAwareBeanPostProcessor bp : getBeanPostProcessorCache().instantiationAware) {
PropertyValues pvsToUse = bp.postProcessProperties(pvs, bw.getWrappedInstance(), beanName); //獲取注解標注需要注入方法或者是字段，并且進行注入
if (pvsToUse == null) {
if (filteredPds == null) {
filteredPds = filterPropertyDescriptorsForDependencyCheck(bw, mbd.allowCaching);
}
pvsToUse = bp.postProcessPropertyValues(pvs, filteredPds, bw.getWrappedInstance(), beanName);
if (pvsToUse == null) {
return;
}
}
pvs = pvsToUse;
}
}
if (needsDepCheck) {
if (filteredPds == null) {
filteredPds = filterPropertyDescriptorsForDependencyCheck(bw, mbd.allowCaching);
}
checkDependencies(beanName, mbd, filteredPds, pvs);
}
if (pvs != null) {
applyPropertyValues(beanName, mbd, bw, pvs);
}
}小知識點： AutowireCapableBeanFactory.AUTOWIRE_NO 表明不會對當前Bean進行外部類的注入，常規使用@Autowire、@Resource 都是這類型 剩下三種都是通過xml 或者 AutowireCapableBeanFactory.autowire(Class<?> beanClass, int autowireMode, boolean dependencyCheck) 進行設置autowireMode 。
根據上面代碼可以知道主流程bean注入都是由InstantiationAwareBeanPostProcessor 進行處理的,簡單說明接口方法
| 方法 | 描述 |
|---|---|
| postProcessBeforeInitialization | 方法是最 先執行的方法，它在目標對象實例化之前調用，該方法的返回值類型是Object，我們可以返回任何類型的值。由于這個時候目標對象還未實例化，所以這個返回值可以用來代替原本該生成的目標對象的實例(比如代理對象)。如果該方法的返回值代替原本該生成的目標對象，后續只有postProcessAfterInitialization方法會調用，其它方法不再調用；否則按照正常的流程走 |
| postProcessAfterInitialization | 方法在目標對象實例化之后調用，這個時候?qū)ο笠呀?jīng)被實例化，但是該實例的屬性還未被設置，都是null。因為它的返回值是決定要不要調用postProcessPropertyValues方法的其中一個因素（因為還有一個因素是mbd.getDependencyCheck()）；如果該方法返回false,并且不需要check，那么postProcessPropertyValues就會被忽略不執行；如果返回true，postProcessPropertyValues就會被執行 |
| postProcessPropertyValues | 對bean屬性值賦值后調用，對屬性值的修改。如果postProcessAfterInstantiation方法返回false，該方法可能不會被調用?？梢栽谠摲椒▋?nèi)對屬性值進行修改 |
| postProcessProperties | Bean屬性賦值就是調用這個方法的 |
InstantiationAwareBeanPostProcessor 接口實現類主要分3個
- ConfigurationClassPostProcessor：看類名就知道處理@Configuration實例化，并沒有屬性注入邏輯，不詳講略過。
- CommonAnnotationBeanPostProcessor：這個類就是實現bean注入，但是是實現JSR-250 注解、@Resource,@EJB、@WebServiceRef，@WebServiceContext，@PostConstrusct、@PreDestory這些注解實現。
- AutowiredAnnotationBeanPostProcessor：實現 @Autowired、@Value注入,并且支持JSR-330's @Inject,主要分析這個類就可以知道bean 注入的。
AutowiredAnnotationBeanPostProcessor分析
private final Set<Class<? extends Annotation>> autowiredAnnotationTypes = new LinkedHashSet<>(4);
@SuppressWarnings("unchecked")
public AutowiredAnnotationBeanPostProcessor() {
this.autowiredAnnotationTypes.add(Autowired.class);
this.autowiredAnnotationTypes.add(Value.class);
try {
this.autowiredAnnotationTypes.add((Class<? extends Annotation>)
ClassUtils.forName("javax.inject.Inject", AutowiredAnnotationBeanPostProcessor.class.getClassLoader()));
logger.trace("JSR-330 'javax.inject.Inject' annotation found and supported for autowiring");
}
catch (ClassNotFoundException ex) {
// JSR-330 API not available - simply skip.
}
}在初始化時就將支持注解加入集合中，再使用掃描器去掃描方法、構造器、字段，如果有這些注解就進行注入。
看下怎么判斷是否需要注入的
@Nullable
private MergedAnnotation<?> findAutowiredAnnotation(AccessibleObject ao) {
MergedAnnotations annotations = MergedAnnotations.from(ao);
for (Class<? extends Annotation> type : this.autowiredAnnotationTypes) {
MergedAnnotation<?> annotation = annotations.get(type);
if (annotation.isPresent()) {
return annotation;
}
}
return null;
} AccessibleObject 是Method、Field、Constructor 父類。
postProcessProperties 如何實現bean注入的
public PropertyValues postProcessProperties(PropertyValues pvs, Object bean, String beanName) {
//獲取需要注入字段，方法
InjectionMetadata metadata = findAutowiringMetadata(beanName, bean.getClass(), pvs);
try {
metadata.inject(bean, beanName, pvs); //注入
}
catch (BeanCreationException ex) {
throw ex;
}
catch (Throwable ex) {
throw new BeanCreationException(beanName, "Injection of autowired dependencies failed", ex);
}
return pvs;
}
//下面就行獲取InjectionMetadata
private InjectionMetadata findAutowiringMetadata(String beanName, Class<?> clazz, @Nullable PropertyValues pvs) {
// Fall back to class name as cache key, for backwards compatibility with custom callers.
String cacheKey = (StringUtils.hasLength(beanName) ? beanName : clazz.getName());
// 快速從緩存中獲取，如果沒有加鎖去解析，然后在結果放入緩存中
InjectionMetadata metadata = this.injectionMetadataCache.get(cacheKey);
if (InjectionMetadata.needsRefresh(metadata, clazz)) {
synchronized (this.injectionMetadataCache) { //雙重檢查
metadata = this.injectionMetadataCache.get(cacheKey);
if (InjectionMetadata.needsRefresh(metadata, clazz)) {
if (metadata != null) {
metadata.clear(pvs);
}
metadata = buildAutowiringMetadata(clazz);
this.injectionMetadataCache.put(cacheKey, metadata);
}
}
}
return metadata;
}- InjectionMetadata 主要是集合bean需要被注入類型，因為已經解析過bean Class信息了，相當于解析結果裝起來
看下如何去掃描方法、字段的
private InjectionMetadata buildAutowiringMetadata(final Class<?> clazz) {
//從給定注解中判斷class 是否攜帶這個注解
if (!AnnotationUtils.isCandidateClass(clazz, this.autowiredAnnotationTypes)) {
return InjectionMetadata.EMPTY;
}
List<InjectionMetadata.InjectedElement> elements = new ArrayList<>();
Class<?> targetClass = clazz;
do {
final List<InjectionMetadata.InjectedElement> currElements = new ArrayList<>();
//遍歷所有Field，找出掃描的注解，特意標注不支持static 修飾field
ReflectionUtils.doWithLocalFields(targetClass, field -> {
MergedAnnotation<?> ann = findAutowiredAnnotation(field);
if (ann != null) {
if (Modifier.isStatic(field.getModifiers())) {
if (logger.isInfoEnabled()) {
logger.info("Autowired annotation is not supported on static fields: " + field);
}
return;
}
// 獲取注解內 required 值
boolean required = determineRequiredStatus(ann);
currElements.add(new AutowiredFieldElement(field, required));
}
});
ReflectionUtils.doWithLocalMethods(targetClass, method -> {
//獲取方法上橋接方法，因為泛型類型擦除，要對橋接方法進行安全檢查，防止在調用是出現異常
Method bridgedMethod = BridgeMethodResolver.findBridgedMethod(method);
if (!BridgeMethodResolver.isVisibilityBridgeMethodPair(method, bridgedMethod)) {
return;
}
//獲取注解
MergedAnnotation<?> ann = findAutowiredAnnotation(bridgedMethod);
//方法安全檢查
if (ann != null && method.equals(ClassUtils.getMostSpecificMethod(method, clazz))) {
if (Modifier.isStatic(method.getModifiers())) { //不支持靜態方法注入
if (logger.isInfoEnabled()) {
logger.info("Autowired annotation is not supported on static methods: " + method);
}
return;
}
if (method.getParameterCount() == 0) {
if (logger.isInfoEnabled()) {
logger.info("Autowired annotation should only be used on methods with parameters: " +
method);
}
}
boolean required = determineRequiredStatus(ann);
PropertyDescriptor pd = BeanUtils.findPropertyForMethod(bridgedMethod, clazz);
currElements.add(new AutowiredMethodElement(method, required, pd));
}
});
// 這樣寫是為了后面加入排在隊列前面，父類屬性優先于子類
elements.addAll(0, currElements);
targetClass = targetClass.getSuperclass();
}
while (targetClass != null && targetClass != Object.class); //這里寫得很好，向上解析父類，直到是Object 為止
return InjectionMetadata.forElements(elements, clazz);
}邏輯非常簡單，就是根據給定注解去class獲取指定的注解，從而獲取到需要注入類型，但是幾行簡單的代碼可以看出強大編碼能力，學習了??。 現在需要注入對象已經獲取到，看如何注入吧
public void inject(Object target, @Nullable String beanName, @Nullable PropertyValues pvs) throws Throwable {
Collection<InjectedElement> checkedElements = this.checkedElements;
Collection<InjectedElement> elementsToIterate =
(checkedElements != null ? checkedElements : this.injectedElements);
if (!elementsToIterate.isEmpty()) {
for (InjectedElement element : elementsToIterate) {
element.inject(target, beanName, pvs);
}
}
}
@Override
protected void inject(Object bean, @Nullable String beanName, @Nullable PropertyValues pvs) throws Throwable {
Field field = (Field) this.member;
Object value;
if (this.cached) {
try {
value = resolvedCachedArgument(beanName, this.cachedFieldValue);
}
catch (NoSuchBeanDefinitionException ex) {
// Unexpected removal of target bean for cached argument -> re-resolve
value = resolveFieldValue(field, bean, beanName);
}
}
else {
value = resolveFieldValue(field, bean, beanName);
}
if (value != null) {
ReflectionUtils.makeAccessible(field);
field.set(bean, value);
}
}
private Object resolveFieldValue(Field field, Object bean, @Nullable String beanName) {
DependencyDescriptor desc = new DependencyDescriptor(field, this.required);
desc.setContainingClass(bean.getClass());
Set<String> autowiredBeanNames = new LinkedHashSet<>(1);
Assert.state(beanFactory != null, "No BeanFactory available");
TypeConverter typeConverter = beanFactory.getTypeConverter(); //類型轉換器
Object value;
try {
value = beanFactory.resolveDependency(desc, beanName, autowiredBeanNames, typeConverter);
}
catch (BeansException ex) {
throw new UnsatisfiedDependencyException(null, beanName, new InjectionPoint(field), ex);
}
synchronized (this) {
if (!this.cached) {
Object cachedFieldValue = null;
if (value != null || this.required) {
cachedFieldValue = desc;
// 將注入關系添加到容器中，方便bean銷毀時同步銷毀
registerDependentBeans(beanName, autowiredBeanNames);
if (autowiredBeanNames.size() == 1) {
String autowiredBeanName = autowiredBeanNames.iterator().next();
if (beanFactory.containsBean(autowiredBeanName) &&
beanFactory.isTypeMatch(autowiredBeanName, field.getType())) { //這些都是為了緩存起來
cachedFieldValue = new ShortcutDependencyDescriptor(
desc, autowiredBeanName, field.getType());
}
}
}
this.cachedFieldValue = cachedFieldValue;
this.cached = true;
}
}
return value;
}
}主要核心是如從緩存獲取到需要注入類型實例在beanFactory.resolveDependency中 進入DefaultListableBeanFactory看下
public Object resolveDependency(DependencyDescriptor descriptor, @Nullable String requestingBeanName,
@Nullable Set<String> autowiredBeanNames, @Nullable TypeConverter typeConverter) throws BeansException {
descriptor.initParameterNameDiscovery(getParameterNameDiscoverer());
if (Optional.class == descriptor.getDependencyType()) {
return createOptionalDependency(descriptor, requestingBeanName);
}
else if (ObjectFactory.class == descriptor.getDependencyType() ||
ObjectProvider.class == descriptor.getDependencyType()) {
return new DependencyObjectProvider(descriptor, requestingBeanName);
}
else if (javaxInjectProviderClass == descriptor.getDependencyType()) {
return new Jsr330Factory().createDependencyProvider(descriptor, requestingBeanName);
}
else {
//懶加載 掃描@Lazy注解，返回一個代理對象
Object result = getAutowireCandidateResolver().getLazyResolutionProxyIfNecessary(
descriptor, requestingBeanName);
if (result == null) {
result = doResolveDependency(descriptor, requestingBeanName, autowiredBeanNames, typeConverter);
}
return result;
}
}@Lazy 使用注解修飾bean 或者Class，在容器初始化化時不會立刻創建，只要需要使用bean才會創建的。 根據類型Optional、ObjectFactory、Provider，還有懶加載情景不同的處理，這些處理本質都是要調用doResolveDependency方法初始化對象，無論那種對象都要 獲取原始對象然后再交給這些接口去包裝增強。
public Object doResolveDependency(DependencyDescriptor descriptor, @Nullable String beanName,
@Nullable Set<String> autowiredBeanNames, @Nullable TypeConverter typeConverter) throws BeansException {
//如果這個注入是通過構造器注入，可以從構造器解析緩存中去獲取注入信息點
InjectionPoint previousInjectionPoint = ConstructorResolver.setCurrentInjectionPoint(descriptor);
try {
Object shortcut = descriptor.resolveShortcut(this);
if (shortcut != null) {
return shortcut;
}
Class<?> type = descriptor.getDependencyType();
//嘗試從注解中獲取默認值 @Value 的value
Object value = getAutowireCandidateResolver().getSuggestedValue(descriptor);
if (value != null) {
if (value instanceof String) {
String strVal = resolveEmbeddedValue((String) value);
BeanDefinition bd = (beanName != null && containsBean(beanName) ?
getMergedBeanDefinition(beanName) : null);
value = evaluateBeanDefinitionString(strVal, bd);
}
TypeConverter converter = (typeConverter != null ? typeConverter : getTypeConverter());
try {
return converter.convertIfNecessary(value, type, descriptor.getTypeDescriptor());
}
catch (UnsupportedOperationException ex) {
// A custom TypeConverter which does not support TypeDescriptor resolution...
return (descriptor.getField() != null ?
converter.convertIfNecessary(value, type, descriptor.getField()) :
converter.convertIfNecessary(value, type, descriptor.getMethodParameter()));
}
}
//多種混合類型處理，stream、collection、Map Array 這些
Object multipleBeans = resolveMultipleBeans(descriptor, beanName, autowiredBeanNames, typeConverter);
if (multipleBeans != null) {
return multipleBeans;
}
//根據類型獲取容器中bean名，返回map key就是bean名，value 初始從容器中獲取對象，如果沒有找到就會拋出異常了
Map<String, Object> matchingBeans = findAutowireCandidates(beanName, type, descriptor);
if (matchingBeans.isEmpty()) {
if (isRequired(descriptor)) {
raiseNoMatchingBeanFound(type, descriptor.getResolvableType(), descriptor);
}
return null;
}
String autowiredBeanName;
Object instanceCandidate;
if (matchingBeans.size() > 1) { //出現一個類型，不同實例，可以根據@Primary, @Priority、屬性名方式去配置
autowiredBeanName = determineAutowireCandidate(matchingBeans, descriptor);
if (autowiredBeanName == null) {
if (isRequired(descriptor) || !indicatesMultipleBeans(type)) { //沒有確定，拋出異常
return descriptor.resolveNotUnique(descriptor.getResolvableType(), matchingBeans);
}
else {
return null;
}
}
instanceCandidate = matchingBeans.get(autowiredBeanName);
}
else {
// We have exactly one match.
Map.Entry<String, Object> entry = matchingBeans.entrySet().iterator().next();
autowiredBeanName = entry.getKey();
instanceCandidate = entry.getValue();
}
if (autowiredBeanNames != null) {
autowiredBeanNames.add(autowiredBeanName);
}
if (instanceCandidate instanceof Class) { //這里其實就是從容器中獲取實例，如果這時候沒有初始化，就走上面初始化流程
instanceCandidate = descriptor.resolveCandidate(autowiredBeanName, type, this);
}
Object result = instanceCandidate;
if (result instanceof NullBean) {
if (isRequired(descriptor)) {
raiseNoMatchingBeanFound(type, descriptor.getResolvableType(), descriptor);
}
result = null;
}
if (!ClassUtils.isAssignableValue(type, result)) {
throw new BeanNotOfRequiredTypeException(autowiredBeanName, type, instanceCandidate.getClass());
}
return result;
}
finally {
ConstructorResolver.setCurrentInjectionPoint(previousInjectionPoint);
}
}這個方法簡單做個總結，先是處理 @Value 情況，然后通過findAutowireCandidates 通過類型去容器中獲取實例，如何實例還沒有初始化，就會調用上面那個初始化過程，將初始化對象返回。根據注入類型進行相應處理，像stream、Collection，這些混合類型都是直接添加進去。如果出現了一個類型多個bean情況，這時就是就是@Primary、@Priority這些注解來判斷或者根據屬性名去和beanName匹配，最后將bean對象返回。 這里就簡單看完一個bean初始化流程了。
總結
現在知道了Bean實例化是由一個策略模式，使用反射攻擊類創建的，和BeanPostProcessor其實并沒有太多關系的。像我剛開始學spring時，老師就說@Autowired 和@Resources向比較，基于類型和beanName進行注入的，這樣說不完全正確的。他是通過類型去獲取bean，如果出現一個類型有多個beanName，才通過bean和屬性名進行注入。使用這么多年Spring了，從來沒有使用過@DependsOn、@Primary、@Priority、@Lookup如果不看源碼還不知道有這個特性呢。看完整個源碼，對bean生命周期有了比較清晰 bean實例化-> 屬性注入-> 執行初始化方法-> 加入spring容器
到此這篇關于Spring Bean是如何初始化的文章就介紹到這了,更多相關Spring Bean初始化內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
Java MongoDB數據庫連接方法梳理
MongoDB作為一種介于關系型數據庫和非關系型數據庫之間的產品，它可以提供可擴展的高性能的數據存儲解決方案，近些年來受到了開發者的喜愛2022-08-08
SpringBoot管理RabbitMQ中的Channel詳解
這篇文章主要介紹了SpringBoot管理RabbitMQ中的Channel詳解,channel僅存在于connection的上下文中,而不會單獨存在,當channel關閉時,其上的所有channel也會關閉,需要的朋友可以參考下2023-08-08
Win10?IDEA如何連接虛擬機中的Hadoop(HDFS)
在虛擬機上配置Hadoop并修改core-site.xml文件,設置IP為局域網地址,IDEA中創建Maven項目,添加依賴,并檢查Hadoop重啟和端口轉發,提供test.bat文件,通過修改IP簡化使用過程2024-11-11
這篇文章主要介紹了新手場景Java線程相關問題及解決方案,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-07-07
這篇文章主要介紹了使用Lombok @Builder注解導致默認值無效的問題，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教2022-08-08
準備入手學習java的安全了，感覺這也是一個大的趨勢，想著盡早進入到java安全的探索中，在反序列化鏈的學習之前，需要先學習反射，不多說了，開干吧2022-03-03
Java使用線程池批量處理數據操作具體流程
這篇文章主要給大家介紹了關于Java使用線程池批量處理數據操作的相關資料,Java多線程編程中線程池是一個非常重要的概念,線程池可以提高線程的復用率和任務調度的效率,尤其是當需要查詢大批量數據時,需要的朋友可以參考下2023-06-06
這篇文章主要為大家介紹了Netty分布式ByteBuf的分類方式源碼解析，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2022-03-03
java序列化與ObjectOutputStream和ObjectInputStream的實例詳解
這篇文章主要介紹了java序列化與ObjectOutputStream和ObjectInputStream的實例詳解的相關資料,希望通過本文能幫助到大家，需要的朋友可以參考下2017-09-09
關于Java中使用jdbc連接數據庫中文出現亂碼的問題
這篇文章主要介紹了關于Java中使用jdbc連接數據庫中文出現亂碼的問題,默認的編碼和數據庫表中的數據使用的編碼是不一致的，如果是中文，那么在數據庫中執行時已經是亂碼了,需要的朋友可以參考下2023-04-04