pod調度將 Pod 指派給節點

更新時間：2022年11月07日 16:27:07 作者：人生的哲理

這篇文章主要為大家介紹了pod調度將Pod指派給節點 示例詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪

一.系統環境

服務器版本	docker軟件版本	Kubernetes(k8s)集群版本	CPU架構
CentOS Linux release 7.4.1708 (Core)	Docker version 20.10.12	v1.21.9	x86_64

Kubernetes集群架構：k8scloude1作為master節點，k8scloude2，k8scloude3作為worker節點

服務器	操作系統版本	CPU架構	進程	功能描述
k8scloude1/192.168.110.130	CentOS Linux release 7.4.1708 (Core)	x86_64	docker，kube-apiserver，etcd，kube-scheduler，kube-controller-manager，kubelet，kube-proxy，coredns，calico	k8s master節點
k8scloude2/192.168.110.129	CentOS Linux release 7.4.1708 (Core)	x86_64	docker，kubelet，kube-proxy，calico	k8s worker節點
k8scloude3/192.168.110.128	CentOS Linux release 7.4.1708 (Core)	x86_64	docker，kubelet，kube-proxy，calico	k8s worker節點

二.前言

本文介紹pod的調度，即如何讓pod運行在Kubernetes集群的指定節點。

進行pod的調度的前提是已經有一套可以正常運行的Kubernetes集群，關于Kubernetes(k8s)集群的安裝部署，可以查看博客《Centos7 安裝部署Kubernetes(k8s)集群》

三.pod的調度

3.1 pod的調度概述

你可以約束一個 Pod 以便限制其只能在特定的節點上運行，或優先在特定的節點上運行。有幾種方法可以實現這點，推薦的方法都是用標簽選擇算符來進行選擇。通常這樣的約束不是必須的，因?yàn)檎{(diào)度器將自動進行合理的放置（比如，將 Pod 分散到節點上，而不是將 Pod 放置在可用資源不足的節點上等等）。但在某些情況下，你可能需要進一步控制 Pod 被部署到哪個節點。例如，確保 Pod 最終落在連接了 SSD 的機器上，或者將來自兩個不同的服務且有大量通信的 Pods 被放置在同一個可用區。

你可以使用下列方法中的任何一種來選擇 Kubernetes 對特定 Pod 的調度：

與節點標簽匹配的 nodeSelector
親和性與反親和性
nodeName 字段
Pod 拓?fù)浞植技s束

3.2 pod自動調度

如果不手動指定pod運行在哪個節點上，k8s會自動調度pod的，k8s自動調度pod在哪個節點上運行考慮的因素有：

待調度的pod列表
可用的node列表
調度算法：主機過濾，主機打分

3.2.1 創建3個主機端口為80的pod

查看hostPort字段的解釋，hostPort字段表示把pod的端口映射到節點，即在節點上公開 Pod 的端口。

#主機端口映射：hostPort: 80
[root@k8scloude1 pod]# kubectl explain pods.spec.containers.ports.hostPort
KIND:     Pod
VERSION:  v1
FIELD:    hostPort <integer>
DESCRIPTION:
     Number of port to expose on the host. If specified, this must be a valid
     port number, 0 < x < 65536. If HostNetwork is specified, this must match
     ContainerPort. Most containers do not need this.

創建第一個pod，hostPort: 80表示把容器的80端口映射到節點的80端口

[root@k8scloude1 pod]# vim schedulepod.yaml
#kind: Pod表示資源類型為Pod   labels指定pod標簽   metadata下面的name指定pod名字   containers下面全是容器的定義   
#image指定鏡像名字  imagePullPolicy指定鏡像下載策略   containers下面的name指定容器名
#resources指定容器資源（CPU，內存等）   env指定容器里的環境變量   dnsPolicy指定DNS策略
#restartPolicy容器重啟策略    ports指定容器端口  containerPort容器端口  hostPort節點上的端口
[root@k8scloude1 pod]# cat schedulepod.yaml 
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: null
  labels:
    run: pod
  name: pod
  namespace: pod
spec:
  containers:
  - image: nginx
    imagePullPolicy: IfNotPresent
    name: pod
    resources: {}
    ports:
    - name: http
      containerPort: 80
      protocol: TCP
      hostPort: 80
  dnsPolicy: ClusterFirst
  restartPolicy: Always
status: {}
[root@k8scloude1 pod]# kubectl apply -f schedulepod.yaml 
pod/pod created
[root@k8scloude1 pod]# kubectl get pods
NAME   READY   STATUS    RESTARTS   AGE
pod    1/1     Running   0          6s

可以看到pod創建成功。

接下來創建第二個pod，hostPort: 80表示把容器的80端口映射到節點的80端口，兩個pod只有pod名字不一樣。

[root@k8scloude1 pod]# cp schedulepod.yaml schedulepod1.yaml 
[root@k8scloude1 pod]# vim schedulepod1.yaml 
[root@k8scloude1 pod]# cat schedulepod1.yaml 
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: null
  labels:
    run: pod1
  name: pod1
  namespace: pod
spec:
  containers:
  - image: nginx
    imagePullPolicy: IfNotPresent
    name: pod1
    resources: {}
    ports:
    - name: http
      containerPort: 80
      protocol: TCP
      hostPort: 80
  dnsPolicy: ClusterFirst
  restartPolicy: Always
status: {}
[root@k8scloude1 pod]# kubectl apply -f schedulepod1.yaml 
pod/pod1 created
[root@k8scloude1 pod]# kubectl get pods
NAME   READY   STATUS    RESTARTS   AGE
pod    1/1     Running   0          11m
pod1   1/1     Running   0          5s

第二個pod創建成功，現在創建第三個pod。

開篇我們已經介紹過集群架構，Kubernetes集群架構：k8scloude1作為master節點，k8scloude2，k8scloude3作為worker節點，k8s集群只有2個worker節點，master節點默認不運行應用pod，主機端口80已經被占用兩臺worker節點全部占用，所以pod2無法運行。

[root@k8scloude1 pod]# sed 's/pod1/pod2/' schedulepod1.yaml | kubectl apply -f -
pod/pod2 created
#主機端口80已經被占用兩臺worker節點全部占用，pod2無法運行
[root@k8scloude1 pod]# kubectl get pods
NAME   READY   STATUS    RESTARTS   AGE
pod    1/1     Running   0          16m
pod1   1/1     Running   0          5m28s
pod2   0/1     Pending   0          5s

觀察pod在k8s集群的分布情況，NODE顯示pod運行在哪個節點

[root@k8scloude1 pod]# kubectl get pods
NAME   READY   STATUS    RESTARTS   AGE
pod    1/1     Running   0          18m
pod1   1/1     Running   0          7m28s
[root@k8scloude1 pod]# kubectl get pods -o wide
NAME   READY   STATUS    RESTARTS   AGE   IP               NODE         NOMINATED NODE   READINESS GATES
pod    1/1     Running   0          29m   10.244.251.208   k8scloude3   &lt;none&gt;           &lt;none&gt;
pod1   1/1     Running   0          18m   10.244.112.156   k8scloude2   &lt;none&gt;           &lt;none&gt;

刪除pod

[root@k8scloude1 pod]# kubectl delete pod pod2 
pod "pod2" deleted
[root@k8scloude1 pod]# kubectl delete pod pod1 pod
pod "pod1" deleted
pod "pod" deleted

上面三個pod都是k8s自動調度的，下面我們手動指定pod運行在哪個節點。

3.3 使用nodeName 字段指定pod運行在哪個節點

使用nodeName 字段指定pod運行在哪個節點，這是一種比較直接的方式，nodeName 是 Pod 規約中的一個字段。如果 nodeName 字段不為空，調度器會忽略該 Pod，而指定節點上的 kubelet 會嘗試將 Pod 放到該節點上。

使用 nodeName 規則的優先級會高于使用 nodeSelector 或親和性與非親和性的規則。

使用 nodeName 來選擇節點的方式有一些局限性：

如果所指代的節點不存在，則 Pod 無法運行，而且在某些情況下可能會被自動刪除。
如果所指代的節點無法提供用來運行 Pod 所需的資源，Pod 會失敗，而其失敗原因中會給出是否因?yàn)閮?nèi)存或 CPU 不足而造成無法運行。
在云環境中的節點名稱并不總是可預測的，也不總是穩定的。

創建pod，nodeName: k8scloude3表示pod要運行在名為k8scloude3的節點

[root@k8scloude1 pod]# vim schedulepod2.yaml 
#kind: Pod表示資源類型為Pod   labels指定pod標簽   metadata下面的name指定pod名字   containers下面全是容器的定義   
#image指定鏡像名字  imagePullPolicy指定鏡像下載策略   containers下面的name指定容器名
#resources指定容器資源（CPU，內存等）   env指定容器里的環境變量   dnsPolicy指定DNS策略
#restartPolicy容器重啟策略    ports指定容器端口  containerPort容器端口  hostPort節點上的端口
#nodeName: k8scloude3指定pod在k8scloude3上運行
[root@k8scloude1 pod]# cat schedulepod2.yaml 
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: null
  labels:
    run: pod1
  name: pod1
  namespace: pod
spec:
  nodeName: k8scloude3
  containers:
  - image: nginx
    imagePullPolicy: IfNotPresent
    name: pod1
    resources: {}
    ports:
    - name: http
      containerPort: 80
      protocol: TCP
      hostPort: 80
  dnsPolicy: ClusterFirst
  restartPolicy: Always
status: {}
[root@k8scloude1 pod]# kubectl apply -f schedulepod2.yaml 
pod/pod1 created

可以看到pod運行在k8scloude3節點

[root@k8scloude1 pod]# kubectl get pod -o wide
NAME   READY   STATUS    RESTARTS   AGE   IP               NODE         NOMINATED NODE   READINESS GATES
pod1   1/1     Running   0          7s    10.244.251.209   k8scloude3   <none>           <none>
[root@k8scloude1 pod]# kubectl delete pod pod1 --force
warning: Immediate deletion does not wait for confirmation that the running resource has been terminated. The resource may continue to run on the cluster indefinitely.
[root@k8scloude1 pod]# kubectl get pods
No resources found in pod namespace.

創建pod，nodeName: k8scloude1讓pod運行在k8scloude1節點

[root@k8scloude1 pod]# vim schedulepod3.yaml 
#kind: Pod表示資源類型為Pod   labels指定pod標簽   metadata下面的name指定pod名字   containers下面全是容器的定義   
#image指定鏡像名字  imagePullPolicy指定鏡像下載策略   containers下面的name指定容器名
#resources指定容器資源（CPU，內存等）   env指定容器里的環境變量   dnsPolicy指定DNS策略
#restartPolicy容器重啟策略    ports指定容器端口  containerPort容器端口  hostPort節點上的端口
#nodeName: k8scloude1讓pod運行在k8scloude1節點
[root@k8scloude1 pod]# cat schedulepod3.yaml 
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: null
  labels:
    run: pod1
  name: pod1
  namespace: pod
spec:
  nodeName: k8scloude1
  containers:
  - image: nginx
    imagePullPolicy: IfNotPresent
    name: pod1
    resources: {}
    ports:
    - name: http
      containerPort: 80
      protocol: TCP
      hostPort: 80
  dnsPolicy: ClusterFirst
  restartPolicy: Always
status: {}
[root@k8scloude1 pod]# kubectl apply -f schedulepod3.yaml 
pod/pod1 created

可以看到pod運行在k8scloude1，注意k8scloude1是master節點，master節點一般不運行應用pod，并且k8scloude1有污點，一般來說，pod是不運行在有污點的主機上的，如果強制調度上去的話，pod的狀態應該是pending，但是通過nodeName可以把一個pod調度到有污點的主機上正常運行的，比如nodeName指定pod運行在master上

[root@k8scloude1 pod]# kubectl get pods -o wide
NAME   READY   STATUS    RESTARTS   AGE   IP              NODE         NOMINATED NODE   READINESS GATES
pod1   1/1     Running   0          47s   10.244.158.81   k8scloude1   <none>           <none>
[root@k8scloude1 pod]# kubectl delete pod pod1 --force
warning: Immediate deletion does not wait for confirmation that the running resource has been terminated. The resource may continue to run on the cluster indefinitely.
pod "pod1" force deleted

3.4 使用節點標簽nodeSelector指定pod運行在哪個節點

與很多其他 Kubernetes 對象類似，節點也有標簽。你可以手動地添加標簽。 Kubernetes 也會為集群中所有節點添加一些標準的標簽。

通過為節點添加標簽，你可以準備讓 Pod 調度到特定節點或節點組上。你可以使用這個功能來確保特定的 Pod 只能運行在具有一定隔離性，安全性或監管屬性的節點上。

nodeSelector 是節點選擇約束的最簡單推薦形式。你可以將 nodeSelector 字段添加到 Pod 的規約中設置你希望目標節點所具有的節點標簽。 Kubernetes 只會將 Pod 調度到擁有你所指定的每個標簽的節點上。nodeSelector 提供了一種最簡單的方法來將 Pod 約束到具有特定標簽的節點上。

3.4.1 查看標簽

查看節點node的標簽，標簽的格式：鍵值對：xxxx/yyyy.aaaa=456123，xxxx1/yyyy1.aaaa=456123，--show-labels參數顯示標簽

[root@k8scloude1 pod]# kubectl get nodes --show-labels
NAME         STATUS   ROLES                  AGE    VERSION   LABELS
k8scloude1   Ready    control-plane,master   7d1h   v1.21.0   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8scloude1,kubernetes.io/os=linux,node-role.kubernetes.io/control-plane=,node-role.kubernetes.io/master=,node.kubernetes.io/exclude-from-external-load-balancers=
k8scloude2   Ready    <none>                 7d     v1.21.0   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8scloude2,kubernetes.io/os=linux
k8scloude3   Ready    <none>                 7d     v1.21.0   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8scloude3,kubernetes.io/os=linux

查看namespace的標簽

[root@k8scloude1 pod]# kubectl get ns --show-labels
NAME              STATUS   AGE    LABELS
default           Active   7d1h   kubernetes.io/metadata.name=default
kube-node-lease   Active   7d1h   kubernetes.io/metadata.name=kube-node-lease
kube-public       Active   7d1h   kubernetes.io/metadata.name=kube-public
kube-system       Active   7d1h   kubernetes.io/metadata.name=kube-system
ns1               Active   6d5h   kubernetes.io/metadata.name=ns1
ns2               Active   6d5h   kubernetes.io/metadata.name=ns2
pod               Active   4d2h   kubernetes.io/metadata.name=pod

查看pod的標簽

[root@k8scloude1 pod]# kubectl get pod -A --show-labels 
NAMESPACE     NAME                                       READY   STATUS    RESTARTS   AGE    LABELS
kube-system   calico-kube-controllers-6b9fbfff44-4jzkj   1/1     Running   12         7d     k8s-app=calico-kube-controllers,pod-template-hash=6b9fbfff44
kube-system   calico-node-bdlgm                          1/1     Running   7          7d     controller-revision-hash=6b57d9cd54,k8s-app=calico-node,pod-template-generation=1
kube-system   calico-node-hx8bk                          1/1     Running   7          7d     controller-revision-hash=6b57d9cd54,k8s-app=calico-node,pod-template-generation=1
kube-system   calico-node-nsbfs                          1/1     Running   7          7d     controller-revision-hash=6b57d9cd54,k8s-app=calico-node,pod-template-generation=1
kube-system   coredns-545d6fc579-7wm95                   1/1     Running   7          7d1h   k8s-app=kube-dns,pod-template-hash=545d6fc579
kube-system   coredns-545d6fc579-87q8j                   1/1     Running   7          7d1h   k8s-app=kube-dns,pod-template-hash=545d6fc579
kube-system   etcd-k8scloude1                            1/1     Running   7          7d1h   component=etcd,tier=control-plane
kube-system   kube-apiserver-k8scloude1                  1/1     Running   11         7d1h   component=kube-apiserver,tier=control-plane
kube-system   kube-controller-manager-k8scloude1         1/1     Running   7          7d1h   component=kube-controller-manager,tier=control-plane
kube-system   kube-proxy-599xh                           1/1     Running   7          7d1h   controller-revision-hash=6795549d44,k8s-app=kube-proxy,pod-template-generation=1
kube-system   kube-proxy-lpj8z                           1/1     Running   7          7d1h   controller-revision-hash=6795549d44,k8s-app=kube-proxy,pod-template-generation=1
kube-system   kube-proxy-zxlk9                           1/1     Running   7          7d1h   controller-revision-hash=6795549d44,k8s-app=kube-proxy,pod-template-generation=1
kube-system   kube-scheduler-k8scloude1                  1/1     Running   7          7d1h   component=kube-scheduler,tier=control-plane
kube-system   metrics-server-bcfb98c76-k5dmj             1/1     Running   6          6d5h   k8s-app=metrics-server,pod-template-hash=bcfb98c76

3.4.2 創建標簽

以node-role.kubernetes.io/control-plane= 標簽為例，鍵是node-role.kubernetes.io/control-plane，值為空。

創建標簽的語法：kubectl label 對象類型對象名鍵=值

給k8scloude2節點設置標簽

[root@k8scloude1 pod]# kubectl label nodes k8scloude2 k8snodename=k8scloude2
node/k8scloude2 labeled
[root@k8scloude1 pod]# kubectl get nodes --show-labels
NAME         STATUS   ROLES                  AGE    VERSION   LABELS
k8scloude1   Ready    control-plane,master   7d1h   v1.21.0   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8scloude1,kubernetes.io/os=linux,node-role.kubernetes.io/control-plane=,node-role.kubernetes.io/master=,node.kubernetes.io/exclude-from-external-load-balancers=
k8scloude2   Ready    <none>                 7d1h   v1.21.0   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,k8snodename=k8scloude2,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8scloude2,kubernetes.io/os=linux
k8scloude3   Ready    <none>                 7d1h   v1.21.0   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8scloude3,kubernetes.io/os=linux

k8scloude2節點刪除標簽

[root@k8scloude1 pod]# kubectl label nodes k8scloude2 k8snodename-
node/k8scloude2 labeled
[root@k8scloude1 pod]# kubectl get nodes --show-labels
NAME         STATUS   ROLES                  AGE    VERSION   LABELS
k8scloude1   Ready    control-plane,master   7d1h   v1.21.0   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8scloude1,kubernetes.io/os=linux,node-role.kubernetes.io/control-plane=,node-role.kubernetes.io/master=,node.kubernetes.io/exclude-from-external-load-balancers=
k8scloude2   Ready    <none>                 7d1h   v1.21.0   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8scloude2,kubernetes.io/os=linux
k8scloude3   Ready    <none>                 7d1h   v1.21.0   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8scloude3,kubernetes.io/os=linux

列出含有標簽k8snodename=k8scloude2的節點

[root@k8scloude1 pod]# kubectl label nodes k8scloude2 k8snodename=k8scloude2
#列出含有標簽k8snodename=k8scloude2的節點
[root@k8scloude1 pod]# kubectl get nodes -l k8snodename=k8scloude2
NAME         STATUS   ROLES    AGE    VERSION
k8scloude2   Ready    <none>   7d1h   v1.21.0
[root@k8scloude1 pod]# kubectl label nodes k8scloude2 k8snodename-
node/k8scloude2 labeled

對所有節點設置標簽

[root@k8scloude1 pod]# kubectl label nodes --all k8snodename=cloude
node/k8scloude1 labeled
node/k8scloude2 labeled
node/k8scloude3 labeled

列出含有標簽k8snodename=cloude的節點

#列出含有標簽k8snodename=cloude的節點
[root@k8scloude1 pod]# kubectl get nodes -l k8snodename=cloude
NAME         STATUS   ROLES                  AGE    VERSION
k8scloude1   Ready    control-plane,master   7d1h   v1.21.0
k8scloude2   Ready    <none>                 7d1h   v1.21.0
k8scloude3   Ready    <none>                 7d1h   v1.21.0
#刪除標簽
[root@k8scloude1 pod]# kubectl label nodes --all k8snodename-
node/k8scloude1 labeled
node/k8scloude2 labeled
node/k8scloude3 labeled
[root@k8scloude1 pod]# kubectl get nodes -l k8snodename=cloude
No resources found

--overwrite參數，標簽的覆蓋

[root@k8scloude1 pod]# kubectl label nodes k8scloude2 k8snodename=k8scloude2
node/k8scloude2 labeled
#標簽的覆蓋
[root@k8scloude1 pod]# kubectl label nodes k8scloude2 k8snodename=k8scloude
error: 'k8snodename' already has a value (k8scloude2), and --overwrite is false
#--overwrite參數，標簽的覆蓋
[root@k8scloude1 pod]# kubectl label nodes k8scloude2 k8snodename=k8scloude --overwrite
node/k8scloude2 labeled
[root@k8scloude1 pod]# kubectl get nodes -l k8snodename=k8scloude2
No resources found
[root@k8scloude1 pod]# kubectl get nodes -l k8snodename=k8scloude
NAME         STATUS   ROLES    AGE    VERSION
k8scloude2   Ready    <none>   7d1h   v1.21.0
[root@k8scloude1 pod]# kubectl label nodes k8scloude2 k8snodename-
node/k8scloude2 labeled

Tips：如果不想在k8scloude1的ROLES里看到control-plane，則可以通過取消標簽達到目的：kubectl label nodes k8scloude1 node-role.kubernetes.io/control-plane- 進行取消標簽

[root@k8scloude1 pod]# kubectl get nodes --show-labels
NAME         STATUS   ROLES                  AGE    VERSION   LABELS
k8scloude1   Ready    control-plane,master   7d1h   v1.21.0   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8scloude1,kubernetes.io/os=linux,node-role.kubernetes.io/control-plane=,node-role.kubernetes.io/master=,node.kubernetes.io/exclude-from-external-load-balancers=
k8scloude2   Ready    <none>                 7d1h   v1.21.0   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8scloude2,kubernetes.io/os=linux
k8scloude3   Ready    <none>                 7d1h   v1.21.0   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/os=linux,kubernetes.io/arch=amd64,kubernetes.io/hostname=k8scloude3,kubernetes.io/os=linux
[root@k8scloude1 pod]# kubectl label nodes k8scloude1 node-role.kubernetes.io/control-plane-

3.4.3 通過標簽控制pod在哪個節點運行

給k8scloude2節點打上標簽k8snodename=k8scloude2

[root@k8scloude1 pod]# kubectl label nodes k8scloude2 k8snodename=k8scloude2
node/k8scloude2 labeled
[root@k8scloude1 pod]# kubectl get nodes -l k8snodename=k8scloude2
NAME         STATUS   ROLES    AGE    VERSION
k8scloude2   Ready    <none>   7d1h   v1.21.0
[root@k8scloude1 pod]# kubectl get pods
No resources found in pod namespace.

創建pod，nodeSelector:k8snodename: k8scloude2 指定pod運行在標簽為k8snodename=k8scloude2的節點上

[root@k8scloude1 pod]# vim schedulepod4.yaml
[root@k8scloude1 pod]# cat schedulepod4.yaml 
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: null
  labels:
    run: pod1
  name: pod1
  namespace: pod
spec:
  nodeSelector:
    k8snodename: k8scloude2
  containers:
  - image: nginx
    imagePullPolicy: IfNotPresent
    name: pod1
    resources: {}
    ports:
    - name: http
      containerPort: 80
      protocol: TCP
      hostPort: 80
  dnsPolicy: ClusterFirst
  restartPolicy: Always
status: {}
[root@k8scloude1 pod]# kubectl apply -f schedulepod4.yaml 
pod/pod1 created

可以看到pod運行在k8scloude2節點

[root@k8scloude1 pod]# kubectl get pod -o wide
NAME   READY   STATUS    RESTARTS   AGE   IP               NODE         NOMINATED NODE   READINESS GATES
pod1   1/1     Running   0          21s   10.244.112.158   k8scloude2   <none>           <none>

刪除pod，刪除標簽

[root@k8scloude1 pod]# kubectl get pod --show-labels
NAME   READY   STATUS    RESTARTS   AGE   LABELS
pod1   1/1     Running   0          32m   run=pod1
[root@k8scloude1 pod]# kubectl delete pod pod1 --force
warning: Immediate deletion does not wait for confirmation that the running resource has been terminated. The resource may continue to run on the cluster indefinitely.
pod "pod1" force deleted
[root@k8scloude1 pod]# kubectl get pod --show-labels
No resources found in pod namespace.
[root@k8scloude1 pod]# kubectl label nodes k8scloude2 k8snodename-
node/k8scloude2 labeled
[root@k8scloude1 pod]# kubectl get nodes -l k8snodename=k8scloude2
No resources found
[root@k8scloude1 pod]# kubectl get nodes -l k8snodename=k8scloude
No resources found

注意：如果兩臺主機的標簽是一致的，那么通過在這兩臺機器上進行打分，哪個機器分高，pod就運行在哪個pod上

給k8s集群的master節點打標簽

[root@k8scloude1 pod]# kubectl label nodes k8scloude1 k8snodename=k8scloude1
node/k8scloude1 labeled
[root@k8scloude1 pod]# kubectl get nodes -l k8snodename=k8scloude1
NAME         STATUS   ROLES                  AGE    VERSION
k8scloude1   Ready    control-plane,master   7d2h   v1.21.0

創建pod，nodeSelector:k8snodename: k8scloude1 指定pod運行在標簽為k8snodename=k8scloude1的節點上

[root@k8scloude1 pod]# vim schedulepod5.yaml 
[root@k8scloude1 pod]# cat schedulepod5.yaml 
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: null
  labels:
    run: pod1
  name: pod1
  namespace: pod
spec:
  nodeSelector:
    k8snodename: k8scloude1
  containers:
  - image: nginx
    imagePullPolicy: IfNotPresent
    name: pod1
    resources: {}
    ports:
    - name: http
      containerPort: 80
      protocol: TCP
      hostPort: 80
  dnsPolicy: ClusterFirst
  restartPolicy: Always
status: {}
[root@k8scloude1 pod]# kubectl apply -f schedulepod5.yaml 
pod/pod1 created

因?yàn)閗8scloude1上有污點，所以pod不能運行在k8scloude1上，pod狀態為Pending

[root@k8scloude1 pod]# kubectl get pod
NAME   READY   STATUS    RESTARTS   AGE
pod1   0/1     Pending   0          9s

刪除pod，刪除標簽

[root@k8scloude1 pod]# kubectl delete pod pod1 
pod "pod1" deleted
[root@k8scloude1 pod]# kubectl get pod
No resources found in pod namespace.
[root@k8scloude1 pod]# kubectl label nodes k8scloude1 k8snodename-
node/k8scloude1 labeled
[root@k8scloude1 pod]# kubectl get nodes -l k8snodename=k8scloude1
No resources found

3.5 使用親和性與反親和性調度pod

nodeSelector 提供了一種最簡單的方法來將 Pod 約束到具有特定標簽的節點上。親和性和反親和性擴展了你可以定義的約束類型。使用親和性與反親和性的一些好處有：

親和性、反親和性語言的表達能力更強。nodeSelector 只能選擇擁有所有指定標簽的節點。親和性、反親和性為你提供對選擇邏輯的更強控制能力。
你可以標明某規則是“軟需求”或者“偏好”，這樣調度器在無法找到匹配節點時仍然調度該 Pod。
你可以使用節點上（或其他拓?fù)溆蛑校┻\(yùn)行的其他 Pod 的標簽來實施調度約束，而不是只能使用節點本身的標簽。這個能力讓你能夠定義規則允許哪些 Pod 可以被放置在一起。

親和性功能由兩種類型的親和性組成：

節點親和性功能類似于 nodeSelector 字段，但它的表達能力更強，并且允許你指定軟規則。
Pod 間親和性/反親和性允許你根據其他 Pod 的標簽來約束 Pod。

節點親和性概念上類似于 nodeSelector，它使你可以根據節點上的標簽來約束 Pod 可以調度到哪些節點上。節點親和性有兩種：

requiredDuringSchedulingIgnoredDuringExecution：調度器只有在規則被滿足的時候才能執行調度。此功能類似于 nodeSelector，但其語法表達能力更強。
preferredDuringSchedulingIgnoredDuringExecution：調度器會嘗試尋找滿足對應規則的節點。如果找不到匹配的節點，調度器仍然會調度該 Pod。

在上述類型中，IgnoredDuringExecution 意味著如果節點標簽在 Kubernetes 調度 Pod 后發生了變更，Pod 仍將繼續運行。

你可以使用 Pod 規約中的 .spec.affinity.nodeAffinity 字段來設置節點親和性。

查看nodeAffinity字段解釋

[root@k8scloude1 pod]# kubectl explain pods.spec.affinity.nodeAffinity 
KIND:     Pod
VERSION:  v1
RESOURCE: nodeAffinity <Object>
DESCRIPTION:
     Describes node affinity scheduling rules for the pod.
     Node affinity is a group of node affinity scheduling rules.
FIELDS:
#軟策略
   preferredDuringSchedulingIgnoredDuringExecution	<[]Object>
     The scheduler will prefer to schedule pods to nodes that satisfy the
     affinity expressions specified by this field, but it may choose a node that
     violates one or more of the expressions. The node that is most preferred is
     the one with the greatest sum of weights, i.e. for each node that meets all
     of the scheduling requirements (resource request, requiredDuringScheduling
     affinity expressions, etc.), compute a sum by iterating through the
     elements of this field and adding "weight" to the sum if the node matches
     the corresponding matchExpressions; the node(s) with the highest sum are
     the most preferred.
#硬策略
   requiredDuringSchedulingIgnoredDuringExecution	<Object>
     If the affinity requirements specified by this field are not met at
     scheduling time, the pod will not be scheduled onto the node. If the
     affinity requirements specified by this field cease to be met at some point
     during pod execution (e.g. due to an update), the system may or may not try
     to eventually evict the pod from its node.

3.5.1 使用硬策略requiredDuringSchedulingIgnoredDuringExecution

創建pod，requiredDuringSchedulingIgnoredDuringExecution參數表示：節點必須包含一個鍵名為 kubernetes.io/hostname 的標簽，并且該標簽的取值必須為 k8scloude2 或 k8scloude3。

你可以使用 operator 字段來為 Kubernetes 設置在解釋規則時要使用的邏輯操作符。你可以使用 In、NotIn、Exists、DoesNotExist、Gt 和 Lt 之一作為操作符。NotIn 和 DoesNotExist 可用來實現節點反親和性行為。你也可以使用節點污點 將 Pod 從特定節點上驅逐。

注意：

如果你同時指定了 nodeSelector 和 nodeAffinity，兩者必須都要滿足，才能將 Pod 調度到候選節點上。
如果你指定了多個與 nodeAffinity 類型關聯的 nodeSelectorTerms，只要其中一個 nodeSelectorTerms 滿足的話，Pod 就可以被調度到節點上。
如果你指定了多個與同一 nodeSelectorTerms 關聯的 matchExpressions，則只有當所有 matchExpressions 都滿足時 Pod 才可以被調度到節點上。

[root@k8scloude1 pod]# vim requiredDuringSchedule.yaml 
 #硬策略
[root@k8scloude1 pod]# cat requiredDuringSchedule.yaml 
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: null
  labels:
    run: pod1
  name: pod1
  namespace: pod
spec:
  affinity:
    nodeAffinity:
      requiredDuringSchedulingIgnoredDuringExecution:
        nodeSelectorTerms:
        - matchExpressions:
          - key: kubernetes.io/hostname
            operator: In
            values: 
            - k8scloude2
            - k8scloude3
  containers:
  - image: nginx
    imagePullPolicy: IfNotPresent
    name: pod1
    resources: {}
    ports:
    - name: http
      containerPort: 80
      protocol: TCP
      hostPort: 80
  dnsPolicy: ClusterFirst
  restartPolicy: Always
status: {}
[root@k8scloude1 pod]# kubectl apply -f requiredDuringSchedule.yaml 
pod/pod1 created

可以看到pod運行在k8scloude3節點

[root@k8scloude1 pod]# kubectl get pods
NAME   READY   STATUS    RESTARTS   AGE
pod1   1/1     Running   0          6s
[root@k8scloude1 pod]# kubectl get pods -o wide
NAME   READY   STATUS    RESTARTS   AGE   IP               NODE         NOMINATED NODE   READINESS GATES
pod1   1/1     Running   0          10s   10.244.251.212   k8scloude3   <none>           <none>
[root@k8scloude1 pod]# kubectl delete pod pod1 --force
warning: Immediate deletion does not wait for confirmation that the running resource has been terminated. The resource may continue to run on the cluster indefinitely.
pod "pod1" force deleted

[root@k8scloude1 pod]# vim requiredDuringSchedule1.yaml 
[root@k8scloude1 pod]# cat requiredDuringSchedule1.yaml 
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: null
  labels:
    run: pod1
  name: pod1
  namespace: pod
spec:
  affinity:
    nodeAffinity:
      requiredDuringSchedulingIgnoredDuringExecution:
        nodeSelectorTerms:
        - matchExpressions:
          - key: kubernetes.io/hostname
            operator: In
            values: 
            - k8scloude4
            - k8scloude5
  containers:
  - image: nginx
    imagePullPolicy: IfNotPresent
    name: pod1
    resources: {}
    ports:
    - name: http
      containerPort: 80
      protocol: TCP
      hostPort: 80
  dnsPolicy: ClusterFirst
  restartPolicy: Always
status: {}
[root@k8scloude1 pod]# kubectl apply -f requiredDuringSchedule1.yaml 
pod/pod1 created

由于requiredDuringSchedulingIgnoredDuringExecution是硬策略，k8scloude4，k8scloude5不滿足條件，所以pod創建失敗

[root@k8scloude1 pod]# kubectl get pods -o wide
NAME   READY   STATUS    RESTARTS   AGE   IP       NODE     NOMINATED NODE   READINESS GATES
pod1   0/1     Pending   0          7s    <none>   <none>   <none>           <none>
[root@k8scloude1 pod]# kubectl delete pod pod1 --force
warning: Immediate deletion does not wait for confirmation that the running resource has been terminated. The resource may continue to run on the cluster indefinitely.
pod "pod1" force deleted

3.5.2 使用軟策略preferredDuringSchedulingIgnoredDuringExecution

給節點打標簽

[root@k8scloude1 pod]# kubectl label nodes k8scloude2 xx=72
node/k8scloude2 labeled
[root@k8scloude1 pod]# kubectl label nodes k8scloude3 xx=59
node/k8scloude3 labeled

創建pod，preferredDuringSchedulingIgnoredDuringExecution參數表示：節點最好具有一個鍵名為 xx 且取值大于 60 的標簽。

[root@k8scloude1 pod]# vim preferredDuringSchedule.yaml 
[root@k8scloude1 pod]# cat preferredDuringSchedule.yaml 
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: null
  labels:
    run: pod1
  name: pod1
  namespace: pod
spec:
  affinity:
    nodeAffinity:
      preferredDuringSchedulingIgnoredDuringExecution:
      - weight: 2
        preference:
          matchExpressions:
          - key: xx
            operator: Gt
            values:
            - "60"
  containers:
  - image: nginx
    imagePullPolicy: IfNotPresent
    name: pod1
    resources: {}
    ports:
    - name: http
      containerPort: 80
      protocol: TCP
      hostPort: 80
  dnsPolicy: ClusterFirst
  restartPolicy: Always
status: {}
[root@k8scloude1 pod]# kubectl apply -f preferredDuringSchedule.yaml 
pod/pod1 created

可以看到pod運行在k8scloude2，因?yàn)閗8scloude2標簽為 xx=72，72大于60

[root@k8scloude1 pod]# kubectl get pods -o wide
NAME   READY   STATUS    RESTARTS   AGE   IP               NODE         NOMINATED NODE   READINESS GATES
pod1   1/1     Running   0          13s   10.244.112.159   k8scloude2   <none>           <none>
[root@k8scloude1 pod]# kubectl delete pod pod1 --force
warning: Immediate deletion does not wait for confirmation that the running resource has been terminated. The resource may continue to run on the cluster indefinitely.
pod "pod1" force deleted

創建pod，preferredDuringSchedulingIgnoredDuringExecution參數表示：節點最好具有一個鍵名為 xx 且取值大于 600 的標簽。

[root@k8scloude1 pod]# vim preferredDuringSchedule1.yaml 
[root@k8scloude1 pod]# cat preferredDuringSchedule1.yaml 
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: null
  labels:
    run: pod1
  name: pod1
  namespace: pod
spec:
  affinity:
    nodeAffinity:
      preferredDuringSchedulingIgnoredDuringExecution:
      - weight: 2
        preference:
          matchExpressions:
          - key: xx
            operator: Gt
            values:
            - "600"
  containers:
  - image: nginx
    imagePullPolicy: IfNotPresent
    name: pod1
    resources: {}
    ports:
    - name: http
      containerPort: 80
      protocol: TCP
      hostPort: 80
  dnsPolicy: ClusterFirst
  restartPolicy: Always
status: {}
[root@k8scloude1 pod]# kubectl apply -f preferredDuringSchedule1.yaml 
pod/pod1 created

因?yàn)閜referredDuringSchedulingIgnoredDuringExecution是軟策略，盡管k8scloude2，k8scloude3都不滿足xx>600，但是還是能成功創建pod

[root@k8scloude1 pod]# kubectl get pods -o wide
NAME   READY   STATUS    RESTARTS   AGE   IP               NODE         NOMINATED NODE   READINESS GATES
pod1   1/1     Running   0          7s    10.244.251.213   k8scloude3   <none>           <none>
[root@k8scloude1 pod]# kubectl delete pod pod1 --force
warning: Immediate deletion does not wait for confirmation that the running resource has been terminated. The resource may continue to run on the cluster indefinitely.
pod "pod1" force deleted

3.5.3 節點親和性權重

你可以為 preferredDuringSchedulingIgnoredDuringExecution 親和性類型的每個實例設置 weight 字段，其取值范圍是 1 到 100。當調度器找到能夠滿足 Pod 的其他調度請求的節點時，調度器會遍歷節點滿足的所有的偏好性規則，并將對應表達式的 weight 值加和。最終的加和值會添加到該節點的其他優先級函數的評分之上。在調度器為 Pod 作出調度決定時，總分最高的節點的優先級也最高。

給節點打標簽

[root@k8scloude1 pod]# kubectl label nodes k8scloude2 yy=59
node/k8scloude2 labeled
[root@k8scloude1 pod]# kubectl label nodes k8scloude3 yy=72
node/k8scloude3 labeled

創建pod，preferredDuringSchedulingIgnoredDuringExecution指定了2條軟策略，但是權重不一樣：weight: 2 和 weight: 10

[root@k8scloude1 pod]# vim preferredDuringSchedule2.yaml 
[root@k8scloude1 pod]# cat preferredDuringSchedule2.yaml 
apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: null
  labels:
    run: pod1
  name: pod1
  namespace: pod
spec:
  affinity:
    nodeAffinity:
      preferredDuringSchedulingIgnoredDuringExecution:
      - weight: 2
        preference:
          matchExpressions:
          - key: xx
            operator: Gt
            values:
            - "60"
      - weight: 10
        preference:
          matchExpressions:
          - key: yy
            operator: Gt
            values:
            - "60"
  containers:
  - image: nginx
    imagePullPolicy: IfNotPresent
    name: pod1
    resources: {}
    ports:
    - name: http
      containerPort: 80
      protocol: TCP
      hostPort: 80
  dnsPolicy: ClusterFirst
  restartPolicy: Always
status: {}
[root@k8scloude1 pod]# kubectl apply -f preferredDuringSchedule2.yaml 
pod/pod1 created

存在兩個候選節點，因?yàn)閥y>60這條規則的weight權重大，所以pod運行在k8scloude3

[root@k8scloude1 pod]# kubectl get pods -o wide
NAME   READY   STATUS    RESTARTS   AGE   IP               NODE         NOMINATED NODE   READINESS GATES
pod1   1/1     Running   0          10s   10.244.251.214   k8scloude3   <none>           <none>
[root@k8scloude1 pod]# kubectl delete pod pod1 --force
warning: Immediate deletion does not wait for confirmation that the running resource has been terminated. The resource may continue to run on the cluster indefinitely.
pod "pod1" force deleted

3.6 Pod 拓?fù)浞植技s束

你可以使用拓?fù)浞植技s束（Topology Spread Constraints）來控制 Pod 在集群內故障域之間的分布，故障域的示例有區域（Region）、可用區（Zone）、節點和其他用戶自定義的拓?fù)溆颉?這樣做有助于提升性能、實現高可用或提升資源利用率。

以上就是pod調度將 Pod 指派給節點 的詳細內容，更多關于pod調度指派給節點 的資料請關注腳本之家其它相關文章！

您可能感興趣的文章:

国产无遮挡裸体免费直播视频,久久精品国产蜜臀av,动漫在线视频一区二区,欧亚日韩一区二区三区,久艹在线免费视频,国产精品美女网站免费,正在播放 97超级视频在线观看,斗破苍穹年番在线观看免费,51最新乱码中文字幕

pod調度將 Pod 指派給節點

目錄

一.系統環境

二.前言

三.pod的調度

3.1 pod的調度概述

3.2 pod自動調度

3.2.1 創建3個主機端口為80的pod

3.3 使用nodeName 字段指定pod運行在哪個節點

3.4 使用節點標簽nodeSelector指定pod運行在哪個節點

3.4.1 查看標簽

3.4.2 創建標簽

3.4.3 通過標簽控制pod在哪個節點運行

3.5 使用親和性與反親和性調度pod

3.5.1 使用硬策略requiredDuringSchedulingIgnoredDuringExecution

3.5.2 使用軟策略preferredDuringSchedulingIgnoredDuringExecution

3.5.3 節點親和性權重

3.6 Pod 拓?fù)浞植技s束

相關文章

最新評論

大家感興趣的內容

最近更新的內容

常用在線小工具

国产无遮挡裸体免费直播视频,久久精品国产蜜臀av,动漫在线视频一区二区,欧亚日韩一区二区三区,久艹在线 免费视频,国产精品美女网站免费,正在播放 97超级视频在线观看,斗破苍穹年番在线观看免费,51最新乱码中文字幕

pod調度將 Pod 指派給節點

目錄

一.系統環境

二.前言

三.pod的調度

3.1 pod的調度概述

3.2 pod自動調度

3.2.1 創建3個主機端口為80的pod

3.3 使用nodeName 字段指定pod運行在哪個節點

3.4 使用節點標簽nodeSelector指定pod運行在哪個節點

3.4.1 查看標簽

3.4.2 創建標簽

3.4.3 通過標簽控制pod在哪個節點運行

3.5 使用親和性與反親和性調度pod

3.5.1 使用硬策略requiredDuringSchedulingIgnoredDuringExecution

3.5.2 使用軟策略preferredDuringSchedulingIgnoredDuringExecution

3.5.3 節點親和性權重

3.6 Pod 拓?fù)浞植技s束

相關文章

最新評論

大家感興趣的內容

最近更新的內容

常用在線小工具

国产无遮挡裸体免费直播视频,久久精品国产蜜臀av,动漫在线视频一区二区,欧亚日韩一区二区三区,久艹在线免费视频,国产精品美女网站免费,正在播放 97超级视频在线观看,斗破苍穹年番在线观看免费,51最新乱码中文字幕