Pytorch在訓練時凍結某些層使其不參與訓練問題(更新梯度)
首先，我們知道，深度學習網絡中的參數是通過計算梯度，在反向傳播進行更新的，從而能得到一個優秀的參數，但是有的時候，我們想固定其中的某些層的參數不參與反向傳播。
比如說，進行微調時，我們想固定已經加載預訓練模型的參數部分，只想更新最后一層的分類器，這時應該怎么做呢。
定義網絡
# 定義一個簡單的網絡 class net(nn.Module): ? ? def __init__(self, num_class=10): ? ? ? ? super(net, self).__init__() ? ? ? ? self.fc1 = nn.Linear(8, 4) ? ? ? ? self.fc2 = nn.Linear(4, num_class) ? ?? ? ?? ? ? def forward(self, x): ? ? ? ? return self.fc2(self.fc1(x))
情況一：當不凍結層時
代碼
model = net()
# 情況一：不凍結參數時
loss_fn = nn.CrossEntropyLoss()
optimizer = optim.SGD(model.parameters(), lr=1e-2) ?# 傳入的是所有的參數
# 訓練前的模型參數
print("model.fc1.weight", model.fc1.weight)
print("model.fc2.weight", model.fc2.weight)
for epoch in range(10):
? ? x = torch.randn((3, 8))
? ? label = torch.randint(0,10,[3]).long()
? ? output = model(x)
? ??
? ? loss = loss_fn(output, label)
? ? optimizer.zero_grad()
? ? loss.backward()
? ? optimizer.step()
# 訓練后的模型參數
print("model.fc1.weight", model.fc1.weight)
print("model.fc2.weight", model.fc2.weight)結果
(bbn) jyzhang@admin2-X10DAi:~/test$ python -u "/home/jyzhang/test/net.py"
model.fc1.weight Parameter containing:
tensor([[ 0.3362, -0.2676, -0.3497, -0.3009, -0.1013, -0.2316, -0.0189, 0.1430],
[-0.2486, 0.2900, -0.1818, -0.0942, 0.1445, 0.2410, -0.1407, -0.3176],
[-0.3198, 0.2039, -0.2249, 0.2819, -0.3136, -0.2794, -0.3011, -0.2270],
[ 0.3376, -0.0842, 0.2747, -0.0232, 0.0768, 0.3160, -0.1185, 0.2911]],
requires_grad=True)
model.fc2.weight Parameter containing:
tensor([[ 0.4277, 0.0945, 0.1768, 0.3773],
[-0.4595, -0.2447, 0.4701, 0.2873],
[ 0.3281, -0.1861, -0.2202, 0.4413],
[-0.1053, -0.1238, 0.0275, -0.0072],
[-0.4448, -0.2787, -0.0280, 0.4629],
[ 0.4063, -0.2091, 0.0706, 0.3216],
[-0.2287, -0.1352, -0.0502, 0.3434],
[-0.2946, -0.4074, 0.4926, -0.0832],
[-0.2608, 0.0165, 0.0501, -0.1673],
[ 0.2507, 0.3006, 0.0481, 0.2257]], requires_grad=True)
model.fc1.weight Parameter containing:
tensor([[ 0.3316, -0.2628, -0.3391, -0.2989, -0.0981, -0.2178, -0.0056, 0.1410],
[-0.2529, 0.2991, -0.1772, -0.0992, 0.1447, 0.2480, -0.1370, -0.3186],
[-0.3246, 0.2055, -0.2229, 0.2745, -0.3158, -0.2750, -0.2994, -0.2295],
[ 0.3366, -0.0877, 0.2693, -0.0182, 0.0807, 0.3117, -0.1184, 0.2946]],
requires_grad=True)
model.fc2.weight Parameter containing:
tensor([[ 0.4189, 0.0985, 0.1723, 0.3804],
[-0.4593, -0.2356, 0.4772, 0.2784],
[ 0.3269, -0.1874, -0.2173, 0.4407],
[-0.1061, -0.1248, 0.0309, -0.0062],
[-0.4322, -0.2868, -0.0319, 0.4647],
[ 0.4048, -0.2150, 0.0692, 0.3228],
[-0.2252, -0.1353, -0.0433, 0.3396],
[-0.2936, -0.4118, 0.4875, -0.0782],
[-0.2625, 0.0192, 0.0509, -0.1670],
[ 0.2474, 0.3056, 0.0418, 0.2265]], requires_grad=True)
結論
當不凍結層時，隨著訓練的進行，模型中的可學習參數層的參數會發生改變
情況二：采用方式一凍結fc1層時
方式一
優化器傳入所有的參數
optimizer = optim.SGD(model.parameters(), lr=1e-2) ?# 傳入的是所有的參數
將要凍結層的參數的requires_grad置為False
for name, param in model.named_parameters(): ? ? if "fc1" in name: ? ? ? ? param.requires_grad = False
代碼
# 情況二：采用方式一凍結fc1層時
loss_fn = nn.CrossEntropyLoss()
optimizer = optim.SGD(model.parameters(), lr=1e-2) ?# 優化器傳入的是所有的參數
# 訓練前的模型參數
print("model.fc1.weight", model.fc1.weight)
print("model.fc2.weight", model.fc2.weight)
# 凍結fc1層的參數
for name, param in model.named_parameters():
? ? if "fc1" in name:
? ? ? ? param.requires_grad = False
for epoch in range(10):
? ? x = torch.randn((3, 8))
? ? label = torch.randint(0,10,[3]).long()
? ? output = model(x)
?
? ? loss = loss_fn(output, label)
? ? optimizer.zero_grad()
? ? loss.backward()
? ? optimizer.step()
print("model.fc1.weight", model.fc1.weight)
print("model.fc2.weight", model.fc2.weight)結果
(bbn) jyzhang@admin2-X10DAi:~/test$ python -u "/home/jyzhang/test/net.py"
model.fc1.weight Parameter containing:
tensor([[ 0.3163, -0.1592, -0.2360, 0.1436, 0.1158, 0.0406, -0.0627, 0.0566],
[-0.1688, 0.3519, 0.2464, -0.2693, 0.1284, 0.0544, -0.0188, 0.2404],
[ 0.0738, 0.2013, 0.0868, 0.1396, -0.2885, 0.3431, -0.1109, 0.2549],
[ 0.1222, -0.1877, 0.3511, 0.1951, 0.2147, -0.0427, -0.3374, -0.0653]],
requires_grad=True)
model.fc2.weight Parameter containing:
tensor([[-0.1830, -0.3147, -0.1698, 0.3235],
[-0.1347, 0.3096, 0.4895, 0.1221],
[ 0.2735, -0.2238, 0.4713, -0.0683],
[-0.3150, -0.1905, 0.3645, 0.3766],
[-0.0340, 0.3212, 0.0650, 0.1380],
[-0.2500, 0.1128, -0.3338, -0.4151],
[ 0.0446, -0.4776, -0.3655, 0.0822],
[-0.1871, -0.0602, -0.4855, -0.3604],
[-0.3296, 0.0523, -0.3424, 0.2151],
[-0.2478, 0.1424, 0.4547, -0.1969]], requires_grad=True)
model.fc1.weight Parameter containing:
tensor([[ 0.3163, -0.1592, -0.2360, 0.1436, 0.1158, 0.0406, -0.0627, 0.0566],
[-0.1688, 0.3519, 0.2464, -0.2693, 0.1284, 0.0544, -0.0188, 0.2404],
[ 0.0738, 0.2013, 0.0868, 0.1396, -0.2885, 0.3431, -0.1109, 0.2549],
[ 0.1222, -0.1877, 0.3511, 0.1951, 0.2147, -0.0427, -0.3374, -0.0653]])
model.fc2.weight Parameter containing:
tensor([[-0.1821, -0.3155, -0.1637, 0.3213],
[-0.1353, 0.3130, 0.4807, 0.1245],
[ 0.2731, -0.2206, 0.4687, -0.0718],
[-0.3138, -0.1925, 0.3561, 0.3809],
[-0.0344, 0.3152, 0.0606, 0.1332],
[-0.2501, 0.1154, -0.3267, -0.4137],
[ 0.0400, -0.4723, -0.3586, 0.0808],
[-0.1823, -0.0667, -0.4854, -0.3543],
[-0.3285, 0.0547, -0.3388, 0.2166],
[-0.2497, 0.1410, 0.4551, -0.2008]], requires_grad=True)
結論
由實驗的結果可以看出：只要設置requires_grad=False雖然傳入模型所有的參數，仍然只更新requires_grad=True的層的參數
情況三：采用方式二凍結fc1層時
方式二
優化器傳入不凍結的fc2層的參數
optimizer = optim.SGD(model.fc2.parameters(), lr=1e-2) ?# 優化器只傳入fc2的參數
注：不需要將要凍結層的參數的requires_grad置為False
代碼
# 情況三：采用方式二凍結fc1層時
loss_fn = nn.CrossEntropyLoss()
optimizer = optim.SGD(model.fc2.parameters(), lr=1e-2) ?# 優化器只傳入fc2的參數
print("model.fc1.weight", model.fc1.weight)
print("model.fc2.weight", model.fc2.weight)
for epoch in range(10):
? ? x = torch.randn((3, 8))
? ? label = torch.randint(0,3,[3]).long()
? ? output = model(x)
?
? ? loss = loss_fn(output, label)
? ? optimizer.zero_grad()
? ? loss.backward()
? ? optimizer.step()
?
print("model.fc1.weight", model.fc1.weight)
print("model.fc2.weight", model.fc2.weight)結果
model.fc1.weight Parameter containing:
tensor([[ 0.2519, -0.1772, -0.2229, 0.0711, -0.1681, 0.1233, -0.3217, -0.0412],
[ 0.2032, -0.2045, 0.2723, 0.3272, 0.1034, 0.1519, -0.0587, -0.3436],
[ 0.0470, 0.2379, 0.0590, 0.2400, 0.2280, 0.2045, -0.0229, -0.3484],
[-0.3023, -0.1195, 0.1792, -0.2173, -0.0492, 0.2640, -0.3511, -0.2845]],
requires_grad=True)
model.fc2.weight Parameter containing:
tensor([[-0.3263, -0.2938, -0.3516, -0.4578],
[-0.4549, -0.0060, 0.4696, -0.0174],
[-0.4841, 0.2861, 0.2658, 0.4483],
[-0.3093, 0.0977, -0.2735, 0.1033],
[-0.2421, 0.4489, -0.4649, 0.0110],
[-0.3671, 0.0182, -0.1027, -0.4441],
[ 0.0205, -0.0659, 0.4183, -0.2068],
[-0.1846, 0.1741, -0.2302, -0.1745],
[-0.3423, -0.2642, 0.2796, 0.4976],
[-0.0770, -0.3766, -0.0512, -0.2105]], requires_grad=True)
model.fc1.weight Parameter containing:
tensor([[ 0.2519, -0.1772, -0.2229, 0.0711, -0.1681, 0.1233, -0.3217, -0.0412],
[ 0.2032, -0.2045, 0.2723, 0.3272, 0.1034, 0.1519, -0.0587, -0.3436],
[ 0.0470, 0.2379, 0.0590, 0.2400, 0.2280, 0.2045, -0.0229, -0.3484],
[-0.3023, -0.1195, 0.1792, -0.2173, -0.0492, 0.2640, -0.3511, -0.2845]],
requires_grad=True)
model.fc2.weight Parameter containing:
tensor([[-0.3253, -0.2973, -0.3707, -0.4560],
[-0.4566, 0.0015, 0.4655, -0.0166],
[-0.4796, 0.2931, 0.2592, 0.4661],
[-0.3097, 0.0966, -0.2695, 0.1002],
[-0.2433, 0.4455, -0.4587, 0.0063],
[-0.3669, 0.0171, -0.0988, -0.4452],
[ 0.0198, -0.0679, 0.4203, -0.2088],
[-0.1854, 0.1717, -0.2241, -0.1781],
[-0.3429, -0.2653, 0.2822, 0.4938],
[-0.0773, -0.3765, -0.0464, -0.2127]], requires_grad=True)
結論
當優化器只傳入要更新的層的參數時，只會更新優化器傳入的參數，對于沒有傳入的參數可以求導，但是仍然不會更新參數
方式一與方式二對比總結
在訓練過程中可能需要固定一部分模型的參數，只更新另一部分參數。
有兩種思路實現這個目標，一個是設置不要更新參數的網絡層為false，另一個就是在定義優化器時只傳入要更新的參數。
最優做法是，優化器只傳入requires_grad=True的參數，這樣占用的內存會更小一點，效率也會更高。
最優寫法
最優寫法
將不更新的參數的requires_grad設置為False，同時不將該參數傳入optimizer
將不更新的參數的requires_grad設置為False
# 凍結fc1層的參數 for name, param in model.named_parameters(): ? ? if "fc1" in name: ? ? ? ? param.requires_grad = False
不將不更新的模型參數傳入optimizer
# 定義一個fliter，只傳入requires_grad=True的模型參數 optimizer = optim.SGD(filter(lambda p : p.requires_grad, model.parameters()), lr=1e-2)?
代碼
# 最優寫法
loss_fn = nn.CrossEntropyLoss()
# # 訓練前的模型參數
print("model.fc1.weight", model.fc1.weight)
print("model.fc2.weight", model.fc2.weight)
print("model.fc1.weight.requires_grad:", model.fc1.weight.requires_grad)
print("model.fc2.weight.requires_grad:", model.fc2.weight.requires_grad)
# 凍結fc1層的參數
for name, param in model.named_parameters():
? ? if "fc1" in name:
? ? ? ? param.requires_grad = False
optimizer = optim.SGD(filter(lambda p : p.requires_grad, model.parameters()), lr=1e-2) ?# 定義一個fliter，只傳入requires_grad=True的模型參數
for epoch in range(10):
? ? x = torch.randn((3, 8))
? ? label = torch.randint(0,3,[3]).long()
? ? output = model(x)
?
? ? loss = loss_fn(output, label)
? ? optimizer.zero_grad()
? ? loss.backward()
? ? optimizer.step()
print("model.fc1.weight", model.fc1.weight)
print("model.fc2.weight", model.fc2.weight)
print("model.fc1.weight.requires_grad:", model.fc1.weight.requires_grad)
print("model.fc2.weight.requires_grad:", model.fc2.weight.requires_grad)結果
(bbn) jyzhang@admin2-X10DAi:~/test$ python -u "/home/jyzhang/test/net.py"
model.fc1.weight Parameter containing:
tensor([[-0.1193, 0.2354, 0.2520, 0.1187, 0.2699, -0.2301, 0.1622, -0.0478],
[-0.2862, -0.1716, 0.2865, 0.2615, -0.2205, -0.2046, -0.0983, -0.1564],
[-0.3143, -0.2248, 0.2198, 0.2338, 0.1184, -0.2033, -0.3418, 0.1434],
[ 0.3107, -0.0411, -0.3016, 0.1924, -0.1756, -0.2881, 0.0528, -0.0444]],
requires_grad=True)
model.fc2.weight Parameter containing:
tensor([[-0.2548, 0.2107, -0.1293, -0.2562],
[-0.1989, -0.2624, 0.2226, 0.4861],
[-0.1501, 0.2516, 0.4311, -0.1650],
[ 0.0334, -0.0963, -0.1731, 0.1706],
[ 0.2451, -0.2102, 0.0499, 0.0497],
[-0.1464, -0.2973, 0.3692, 0.0523],
[ 0.1192, 0.3575, -0.1911, 0.1457],
[-0.0990, 0.2059, 0.2072, -0.2013],
[-0.4397, 0.4036, -0.3402, -0.0417],
[ 0.0379, 0.0128, -0.3212, -0.0867]], requires_grad=True)
model.fc1.weight.requires_grad: True
model.fc2.weight.requires_grad: True
model.fc1.weight Parameter containing:
tensor([[-0.1193, 0.2354, 0.2520, 0.1187, 0.2699, -0.2301, 0.1622, -0.0478],
[-0.2862, -0.1716, 0.2865, 0.2615, -0.2205, -0.2046, -0.0983, -0.1564],
[-0.3143, -0.2248, 0.2198, 0.2338, 0.1184, -0.2033, -0.3418, 0.1434],
[ 0.3107, -0.0411, -0.3016, 0.1924, -0.1756, -0.2881, 0.0528, -0.0444]])
model.fc2.weight Parameter containing:
tensor([[-0.2637, 0.2073, -0.1293, -0.2422],
[-0.2027, -0.2641, 0.2152, 0.4897],
[-0.1543, 0.2504, 0.4188, -0.1576],
[ 0.0356, -0.0947, -0.1698, 0.1669],
[ 0.2474, -0.2081, 0.0536, 0.0456],
[-0.1445, -0.2962, 0.3708, 0.0500],
[ 0.1219, 0.3574, -0.1876, 0.1404],
[-0.0961, 0.2058, 0.2091, -0.2046],
[-0.4368, 0.4039, -0.3376, -0.0450],
[ 0.0398, 0.0143, -0.3181, -0.0897]], requires_grad=True)
model.fc1.weight.requires_grad: False
model.fc2.weight.requires_grad: True
結論
最優寫法能夠節省顯存和提升速度：
節省顯存：不將不更新的參數傳入optimizer
提升速度：將不更新的參數的requires_grad設置為False，節省了計算這部分參數梯度的時間
總結
以上為個人經驗，希望能給大家一個參考，也希望大家多多支持腳本之家。
相關文章
Pandas分組聚合之groupby()、agg()方法的使用教程
今天看到pandas的聚合函數agg,比較陌生,平時的工作中處理數據的時候使用的也比較少,為了加深印象,總結一下使用的方法,下面這篇文章主要給大家介紹了關于Pandas分組聚合之groupby()、agg()方法的使用教程,需要的朋友可以參考下2023-01-01
今天小編就為大家分享一篇解決sublime+python3無法輸出中文的問題，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2018-12-12
這篇文章主要介紹了Linux下python制作名片示例的相關資料,需要的朋友可以參考下2018-07-07
這篇文章主要介紹了Python3中的2to3轉換工具使用示例,本文詳細講解了使用的步驟,并總結了一些使用注意事項,需要的朋友可以參考下2015-06-06
一文教會你用Python實現pdf轉word
python實現pdf轉word,支持中英文轉換,轉換精度高,可以達到使用效果,下面這篇文章主要給大家介紹了關于用Python實現pdf轉word的相關資料,需要的朋友可以參考下2023-01-01
python中watchdog文件監控與檢測上傳功能
這篇文章主要介紹了python中watchdog文件監控與檢測上傳功能，本文給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-10-10
Python通過paramiko遠程下載Linux服務器上的文件實例
今天小編就為大家分享一篇Python通過paramiko遠程下載Linux服務器上的文件實例，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2018-12-12
本文給大家匯總介紹了Python安裝第三方庫及常見問題處理方法，非常的簡單使用，有需要的小伙伴可以參考下2016-09-09
本文主要介紹了pandas溫差查詢案例的實現，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2022-06-06