詳解Android廣播Broadcast的啟動流程
正文
本文整體閱讀下來相對Activity和Service的啟動流程較容易，比較貼近我們?nèi)粘４a開發習慣。我們曾經有個整機項目，多個APP跨進程交互，本來想采用AIDL進行的，但最終考慮到項目工期和其他同事的能力，最終在采用廣播方式進行IPC。
那時，自己也在想，這么多個APP相互發信息，數據量也大，對整機性能有影響么？會不會存在丟失和內存問題。一臉茫然，網上也不會有類似信息告訴總結這種情況，本文也不會總結這個答案，因為看完之后心中自然有數了。
在AMS中持有集合用于存儲所有的廣播，應用程序可以從向其注冊和解注冊廣播。當應用發送廣播時，AMS檢查相關權限和特殊的Intent。然后再根據對應IntentFilter匹配到一個或多個Receiver，在應用進程回調其onReceive函數。
閱讀源碼本身就是一份苦活，不可能一次就讀懂，或者了解透的。只有反復的閱讀，輸入與輸出，才會越來越輕松。所以個人建議，先粗讀，了解個大概的思路就行。收藏或點贊，等自己ready，再好好結合源碼閱讀。一定要Fuck Code!
廣播的注冊
我們常在Activity或Service、甚至Application中調用registerReceiver函數來注冊動態廣播，該函數其實來自它們共同的父類ContextWrapper中。ContextWrapper是Context的子類，我們會在介紹Context的文章介紹它們的關系。
public Intent registerReceiver(
BroadcastReceiver receiver, IntentFilter filter) {
return mBase.registerReceiver(receiver, filter);
}
這里Context類型的mBase，在Activity的創建過程實際被賦值為ContextImpl實例。
public Intent registerReceiver(BroadcastReceiver receiver, IntentFilter filter) {
return registerReceiver(receiver, filter, null, null);
}
public Intent registerReceiver(BroadcastReceiver receiver, IntentFilter filter,
String broadcastPermission, Handler scheduler) {
return registerReceiverInternal(receiver, getUserId(),
filter, broadcastPermission, scheduler, getOuterContext(), 0);
}
經過registerReceiver重載函數，調用了registerReceiverInternal函數。
private Intent registerReceiverInternal(BroadcastReceiver receiver, int userId,
IntentFilter filter, String broadcastPermission,
Handler scheduler, Context context, int flags) {
IIntentReceiver rd = null;
//分析一
if (receiver != null) {
if (mPackageInfo != null && context != null) {
if (scheduler == null) {
scheduler = mMainThread.getHandler();
}
rd = mPackageInfo.getReceiverDispatcher(
receiver, context, scheduler,
mMainThread.getInstrumentation(), true);
} else {
if (scheduler == null) {
scheduler = mMainThread.getHandler();
}
rd = new LoadedApk.ReceiverDispatcher(
receiver, context, scheduler, null, true).getIIntentReceiver();
}
}
try {
分析二：
final Intent intent = ActivityManager.getService().registerReceiverWithFeature(
mMainThread.getApplicationThread(), mBasePackageName, getAttributionTag(), rd,
filter, broadcastPermission, userId, flags);
if (intent != null) {
intent.setExtrasClassLoader(getClassLoader());
intent.prepareToEnterProcess();
}
return intent;
} catch (RemoteException e) {
throw e.rethrowFromSystemServer();
}
}
分析一:
傳遞進來的BroadcastReceiver不為null，LoadedApk類型的mPackageInfo只要應用進程啟動，該屬性就會被賦值，context這里指向Activity。scheduler為null，賦值為主線程的H類型mH對象。分析一，主要通過上面的變量來獲得IIntentReceiver類型rd對象。
getReceiverDispatcher函數先從緩存檢測是否有相同類型的BroadcastReceiver對應的ReceiverDispatcher。沒有的話，則新建并緩存起來。 一個context對應多個BroadcastReceiver，而一個BroadcastReceiver對應用一個ReceiverDispatcher。
ReceiverDispatcher是LoadedDispatcher的靜態內部類，其內部還有一個AIDL類型本地實現靜態類InnerReceiver。在ReceiverDispatcher的構造函數中會創建InnerReceiver的實例。
public IIntentReceiver getReceiverDispatcher(BroadcastReceiver r,
Context context, Handler handler,
Instrumentation instrumentation, boolean registered) {
synchronized (mReceivers) {
LoadedApk.ReceiverDispatcher rd = null;
ArrayMap<BroadcastReceiver, LoadedApk.ReceiverDispatcher> map = null;
if (registered) {
map = mReceivers.get(context);
if (map != null) {
rd = map.get(r);
}
}
if (rd == null) {
rd = new ReceiverDispatcher(r, context, handler,
instrumentation, registered);
if (registered) {
if (map == null) {
map = new ArrayMap<BroadcastReceiver, LoadedApk.ReceiverDispatcher>();
mReceivers.put(context, map);
}
map.put(r, rd);
}
} else {
rd.validate(context, handler);
}
rd.mForgotten = false;
return rd.getIIntentReceiver();
}
}
回到registerReceiverInternal函數的分析二，調用了AMS的registerReceiverWithFeature函數。
該函數是Broadcast整個注冊過程結束的地方，根據新注冊的BroadcastReceiver，處理粘性廣播的發送和當前注冊Receiver的添加。
分析一：
粘性廣播存儲在AMS的SparseArray<ArrayMap<String, ArrayList<Intent>>>類型的 mStickyBroadcasts中。SparseArray的key為userId,而ArrayMap的key為action,value為Intent。即我們可以通過用戶id在mStickyBroadcasts找到當前進程對應所有粘性廣播（和針對所有進程的粘性廣播），然后根據對應的action找到對應的Intent。這里將他們收集到stickyIntents集合中。
分析二：
所有廣播的接收者BroacastReceiver存儲在AMS類 HashMap<IBinder, ReceiverList>類型的mRegisteredReceivers中。這里的IBinder類型就是應用進程前面創建的InnerReceiver類實例在AMS的引用。因為廣播接收者BroadcastReceiver對應一個或多個Broadcast,所以這里通過繼承自ArrayList<BroadcastFilter>的ReceiverList來表達這種關系。通過BroadcastFilter來表示當前接收者感興趣的廣播。
分析三：
對匹配到的粘性Intent進入廣播隊列廣播。
public Intent registerReceiverWithFeature(IApplicationThread caller, String callerPackage,
String callerFeatureId, IIntentReceiver receiver, IntentFilter filter,
String permission, int userId, int flags) {
enforceNotIsolatedCaller("registerReceiver");
//粘性Intent
ArrayList<Intent> stickyIntents = null;
ProcessRecord callerApp = null;
final boolean visibleToInstantApps
= (flags & Context.RECEIVER_VISIBLE_TO_INSTANT_APPS) != 0;
int callingUid;
int callingPid;
boolean instantApp;
synchronized(this) {
if (caller != null) {
//獲得當前引用進程的ProcessRecord
callerApp = getRecordForAppLocked(caller);
...
callingUid = callerApp.info.uid;
callingPid = callerApp.pid;
} else {
callerPackage = null;
callingUid = Binder.getCallingUid();
callingPid = Binder.getCallingPid();
}
//是否快應用（類似小程序）
instantApp = isInstantApp(callerApp, callerPackage, callingUid);
userId = mUserController.handleIncomingUser(callingPid, callingUid, userId, true,
ALLOW_FULL_ONLY, "registerReceiver", callerPackage);
//分析一：當前注冊廣播中感興趣的action列表
Iterator<String> actions = filter.actionsIterator();
if (actions == null) {
ArrayList<String> noAction = new ArrayList<String>(1);
noAction.add(null);
actions = noAction.iterator();
}
//從歷史粘性廣播中查找與當前注冊的action一致的intent
//添加到stickyIntents
// Collect stickies of users
int[] userIds = { UserHandle.USER_ALL, UserHandle.getUserId(callingUid) };
while (actions.hasNext()) {
String action = actions.next();
for (int id : userIds) {
ArrayMap<String, ArrayList<Intent>> stickies = mStickyBroadcasts.get(id);
if (stickies != null) {
ArrayList<Intent> intents = stickies.get(action);
if (intents != null) {
if (stickyIntents == null) {
stickyIntents = new ArrayList<Intent>();
}
stickyIntents.addAll(intents);
}
}
}
}
}
//處理content類型的Intent
ArrayList<Intent> allSticky = null;
if (stickyIntents != null) {
final ContentResolver resolver = mContext.getContentResolver();
// Look for any matching sticky broadcasts...
for (int i = 0, N = stickyIntents.size(); i < N; i++) {
Intent intent = stickyIntents.get(i);
// Don't provided intents that aren't available to instant apps.
if (instantApp &&
(intent.getFlags() & Intent.FLAG_RECEIVER_VISIBLE_TO_INSTANT_APPS) == 0) {
continue;
}
//當前注冊廣播IntentFilter是否與action一致的intent的匹配
//處理content類型
if (filter.match(resolver, intent, true, TAG) >= 0) {
if (allSticky == null) {
allSticky = new ArrayList<Intent>();
}
allSticky.add(intent);
}
}
}
//receiver為null，直接返回null或者第一個粘性intent
Intent sticky = allSticky != null ? allSticky.get(0) : null;
if (receiver == null) {
return sticky;
}
synchronized (this) {
...
//分析二：
//從緩存或新建ReceiverList對象，與Receiver綁定
ReceiverList rl = mRegisteredReceivers.get(receiver.asBinder());
if (rl == null) {
rl = new ReceiverList(this, callerApp, callingPid, callingUid,
userId, receiver);
if (rl.app != null) {
final int totalReceiversForApp = rl.app.receivers.size();
if (totalReceiversForApp >= MAX_RECEIVERS_ALLOWED_PER_APP) {
throw new IllegalStateException("Too many receivers, total of "
+ totalReceiversForApp + ", registered for pid: "
+ rl.pid + ", callerPackage: " + callerPackage);
}
//添加到ProcessRecord記錄中
rl.app.receivers.add(rl);
} else {
try {
receiver.asBinder().linkToDeath(rl, 0);
} catch (RemoteException e) {
return sticky;
}
rl.linkedToDeath = true;
}
mRegisteredReceivers.put(receiver.asBinder(), rl);
}
...
//新建BroadcastFilter，并添加到BroadcastList
BroadcastFilter bf = new BroadcastFilter(filter, rl, callerPackage, callerFeatureId,
permission, callingUid, userId, instantApp, visibleToInstantApps);
if (rl.containsFilter(filter)) {
...
} else {
rl.add(bf);
//添加到接收者解析器
mReceiverResolver.addFilter(bf);
}
// Enqueue broadcasts for all existing stickies that match
// this filter.
//分析三：對匹配到action的粘性廣播進行廣播
if (allSticky != null) {
ArrayList receivers = new ArrayList();
receivers.add(bf);
final int stickyCount = allSticky.size();
for (int i = 0; i < stickyCount; i++) {
Intent intent = allSticky.get(i);
BroadcastQueue queue = broadcastQueueForIntent(intent);
BroadcastRecord r = new BroadcastRecord(queue, intent, null,
null, null, -1, -1, false, null, null, OP_NONE, null, receivers,
null, 0, null, null, false, true, true, -1, false,
false /* only PRE_BOOT_COMPLETED should be exempt, no stickies */);
queue.enqueueParallelBroadcastLocked(r);
queue.scheduleBroadcastsLocked();
}
}
return sticky;
}
}
廣播的解注冊
回到ContextWrapper的unregisterReceiver函數。
#ContextWrapper
public void unregisterReceiver(BroadcastReceiver receiver) {
mBase.unregisterReceiver(receiver);
}
#ContextImpl
public void unregisterReceiver(BroadcastReceiver receiver) {
if (mPackageInfo != null) {
IIntentReceiver rd = mPackageInfo.forgetReceiverDispatcher(
getOuterContext(), receiver);
try {
ActivityManager.getService().unregisterReceiver(rd);
} catch (RemoteException e) {
throw e.rethrowFromSystemServer();
}
} else {
throw new RuntimeException("Not supported in system context");
}
}
這里通過receiver和context獲得IIntentReceiver實例rd，然后調用AMS的unregisterReceiver函數。其中LoadedApk的forgetReceiverDispatcher函數，主要是從mReceivers獲取IIntentReceiver的實例，并將receiver對應的內容從緩存移除。
AMS的unregisterReceiver函數。主要是將注冊過程添加到mRegisteredReceivers、ProcessProcess.Receivers、mReceiverResolver中對應的內容移除。并終止正在發送的廣播。
public void unregisterReceiver(IIntentReceiver receiver) {
...
final long origId = Binder.clearCallingIdentity();
try {
boolean doTrim = false;
synchronized(this) {
//獲得當前對應的ReceiverList
ReceiverList rl = mRegisteredReceivers.get(receiver.asBinder());
if (rl != null) {
//默認情況為null，看看廣播發送是否會賦值
//從處理邏輯來看，就是廣播內容
final BroadcastRecord r = rl.curBroadcast;
if (r != null && r == r.queue.getMatchingOrderedReceiver(r)) {
final boolean doNext = r.queue.finishReceiverLocked(
r, r.resultCode, r.resultData, r.resultExtras,
r.resultAbort, false);
if (doNext) {
doTrim = true;
r.queue.processNextBroadcast(false);
}
}
//從processRecord中移除
if (rl.app != null) {
rl.app.receivers.remove(rl);
}
//從mRegisteredReceivers和mReceiverResolver移除
removeReceiverLocked(rl);
if (rl.linkedToDeath) {
rl.linkedToDeath = false;
rl.receiver.asBinder().unlinkToDeath(rl, 0);
}
}
}
// If we actually concluded any broadcasts, we might now be able
// to trim the recipients' apps from our working set
if (doTrim) {
trimApplications(OomAdjuster.OOM_ADJ_REASON_FINISH_RECEIVER);
return;
}
} finally {
Binder.restoreCallingIdentity(origId);
}
}
void removeReceiverLocked(ReceiverList rl) {
mRegisteredReceivers.remove(rl.receiver.asBinder());
for (int i = rl.size() - 1; i >= 0; i--) {
mReceiverResolver.removeFilter(rl.get(i));
}
}
廣播的發送
定位到ContextWrapper的sendBroadcast函數。
public void sendBroadcast(Intent intent) {
mBase.sendBroadcast(intent);
}
public void sendBroadcast(Intent intent) {
warnIfCallingFromSystemProcess();
String resolvedType = intent.resolveTypeIfNeeded(getContentResolver());
try {
intent.prepareToLeaveProcess(this);
ActivityManager.getService().broadcastIntentWithFeature(mMainThread.getApplicationThread(), getAttributionTag(), intent, resolvedType,null, Activity.RESULT_OK, null, null, null, AppOpsManager.OP_NONE, null, false,false, getUserId());
} catch (RemoteException e) {
throw e.rethrowFromSystemServer();
}
}
調用AMS的broadcastIntentWithFeature函數。內部又調用了broadcastIntentLocked函數。是所有Intent處理的地方，很長很長。有對特殊類型的Intent處理，例如Intent.ACTION_PACKAGE_REMOVED和Intent.ACTION_TIME_CHANGED。該函數主要將有序和無序廣播接收者（匹配Intent）添加到receivers列表，并創建BroadcastRecord對象r，持有receivers列表。并根據intent獲得對應的廣播隊列queue，將r添加到queue中，執行queue.scheduleBroadcastsLocked函數。
#AMS xxm
@GuardedBy("this")
final int broadcastIntentLocked(ProcessRecord callerApp, String callerPackage,
@Nullable String callerFeatureId, Intent intent, String resolvedType,
IIntentReceiver resultTo, int resultCode, String resultData,
Bundle resultExtras, String[] requiredPermissions, int appOp, Bundle bOptions,
boolean ordered, boolean sticky, int callingPid, int callingUid, int realCallingUid,
int realCallingPid, int userId, boolean allowBackgroundActivityStarts,
@Nullable int[] broadcastWhitelist) {
intent = new Intent(intent);
...
int[] users;
if (userId == UserHandle.USER_ALL) {
// Caller wants broadcast to go to all started users.
users = mUserController.getStartedUserArray();
} else {
// Caller wants broadcast to go to one specific user.
users = new int[] {userId};
}
// Figure out who all will receive this broadcast.
List receivers = null;
List<BroadcastFilter> registeredReceivers = null;
// Need to resolve the intent to interested receivers...
if ((intent.getFlags()&Intent.FLAG_RECEIVER_REGISTERED_ONLY)
== 0) {
receivers = collectReceiverComponents(
intent, resolvedType, callingUid, users, broadcastWhitelist);
}
if (intent.getComponent() == null) {
if (userId == UserHandle.USER_ALL && callingUid == SHELL_UID) {
// Query one target user at a time, excluding shell-restricted users
for (int i = 0; i < users.length; i++) {
if (mUserController.hasUserRestriction(
UserManager.DISALLOW_DEBUGGING_FEATURES, users[i])) {
continue;
}
//查詢已注冊的Receiver，在注冊過程會被添加
List<BroadcastFilter> registeredReceiversForUser =
mReceiverResolver.queryIntent(intent,
resolvedType, false /*defaultOnly*/, users[i]);
if (registeredReceivers == null) {
registeredReceivers = registeredReceiversForUser;
} else if (registeredReceiversForUser != null) {
registeredReceivers.addAll(registeredReceiversForUser);
}
}
} else {
//查詢已注冊的Receiver，在注冊過程會被添加
registeredReceivers = mReceiverResolver.queryIntent(intent,
resolvedType, false /*defaultOnly*/, userId);
}
}
final boolean replacePending =
(intent.getFlags()&Intent.FLAG_RECEIVER_REPLACE_PENDING) != 0;
...
int NR = registeredReceivers != null ? registeredReceivers.size() : 0;
if (!ordered && NR > 0) {
...
//通過intent獲得廣播隊列
final BroadcastQueue queue = broadcastQueueForIntent(intent);
//將所有數據都封裝到BroadcastRecord中
BroadcastRecord r = new BroadcastRecord(queue, intent, callerApp, callerPackage,
callerFeatureId, callingPid, callingUid, callerInstantApp, resolvedType,
requiredPermissions, appOp, brOptions, registeredReceivers, resultTo,
resultCode, resultData, resultExtras, ordered, sticky, false, userId,
allowBackgroundActivityStarts, timeoutExempt);
...
final boolean replaced = replacePending
&& (queue.replaceParallelBroadcastLocked(r) != null);
if (!replaced) {
//將廣播添加到queue的mParallelBroadcasts數組列表中
queue.enqueueParallelBroadcastLocked(r);
queue.scheduleBroadcastsLocked();
}
registeredReceivers = null;
NR = 0;
}
...
return ActivityManager.BROADCAST_SUCCESS;
}
enqueueParallelBroadcastLocked函數將BroadcastRecord對象r添加到ArrayList類型的mParallelBroadcasts,后續執行隊列事務會從其中取出。
scheduleBroadcastsLocked函數。調用BroadcastHandler類型的mHandler發送一個BROADCAST_INTENT_MSG消息。
#BroadcastQueue xxm
public void scheduleBroadcastsLocked() {
if (mBroadcastsScheduled) {
return;
}
mHandler.sendMessage(mHandler.obtainMessage(BROADCAST_INTENT_MSG, this));
mBroadcastsScheduled = true;
}
BroadcastHandler的handleMessage函數。執行了processNextBroadcast函數。
#BroadcastHandler xxm
public void handleMessage(Message msg) {
switch (msg.what) {
case BROADCAST_INTENT_MSG: {
processNextBroadcast(true);
} break;
case BROADCAST_TIMEOUT_MSG: {
synchronized (mService) {
broadcastTimeoutLocked(true);
}
} break;
}
}
processNextBroadcast函數內容太長了，主要是將粘性廣播和無序廣播發送給接收者。這里只看函數前半部分對無序廣播的處理。其中無序廣播是從mParallelBroadcasts取出所有廣播，并遍歷每個廣播的過濾器filter，將廣播和廣播filter傳遞給deliverToRegisteredReceiverLocked函數
#BroadcastQueue xxm
if (fromMsg) {
mBroadcastsScheduled = false;
}
//遍歷無序廣播數組
while (mParallelBroadcasts.size() > 0) {
r = mParallelBroadcasts.remove(0);
...
final int N = r.receivers.size();
...
for (int i=0; i<N; i++) {
Object target = r.receivers.get(i);
//開始傳遞廣播
deliverToRegisteredReceiverLocked(r, (BroadcastFilter)target, false, i);
}
addBroadcastToHistoryLocked(r);
}
deliverToRegisteredReceiverLocked函數。主要進行權限檢查。
#BroadcastQueue xxm
private void deliverToRegisteredReceiverLocked(BroadcastRecord r,
BroadcastFilter filter, boolean ordered, int index) {
boolean skip = false;
...
//廣播filter進行權限檢查，不通過skip=true
...
if (skip) {
r.delivery[index] = BroadcastRecord.DELIVERY_SKIPPED;
return;
}
...
r.delivery[index] = BroadcastRecord.DELIVERY_DELIVERED;
...
performReceiveLocked(filter.receiverList.app, filter.receiverList.receiver,
new Intent(r.intent), r.resultCode, r.resultData,
r.resultExtras, r.ordered, r.initialSticky, r.userId);
...
}
performReceiveLocked函數。如果接收者所在的進程已經啟動，直接調用 app.thread.scheduleRegisteredReceiver,如果未啟動，則直接回調 receiver.performReceive。
#BroadcastQueue xxm
void performReceiveLocked(ProcessRecord app, IIntentReceiver receiver,
Intent intent, int resultCode, String data, Bundle extras,
boolean ordered, boolean sticky, int sendingUser)
throws RemoteException {
if (app != null) {
if (app.thread != null) {
try {
app.thread.scheduleRegisteredReceiver(receiver, intent, resultCode,
data, extras, ordered, sticky, sendingUser, app.getReportedProcState());
} catch (RemoteException ex) {
synchronized (mService) {
app.scheduleCrash("can't deliver broadcast");
}
throw ex;
}
} else {
throw new RemoteException("app.thread must not be null");
}
} else {
receiver.performReceive(intent, resultCode, data, extras, ordered,
sticky, sendingUser);
}
}
如果進程已經啟動，則調用ApplicationThread的scheduleRegisteredReceiver函數。
public void scheduleRegisteredReceiver(IIntentReceiver receiver, Intent intent,
int resultCode, String dataStr, Bundle extras, boolean ordered,
boolean sticky, int sendingUser, int processState) throws RemoteException {
updateProcessState(processState, false);
receiver.performReceive(intent, resultCode, dataStr, extras, ordered,
sticky, sendingUser);
}
調用了LoadedApk.ReceiverDispatcher.InnerReceiver類的performReceive函數。
public void performReceive(Intent intent, int resultCode, String data,
Bundle extras, boolean ordered, boolean sticky, int sendingUser) {
final LoadedApk.ReceiverDispatcher rd;
if (intent == null) {
rd = null;
} else {
rd = mDispatcher.get();
}
if (rd != null) {
//分析一
rd.performReceive(intent, resultCode, data, extras,
ordered, sticky, sendingUser);
} else {
IActivityManager mgr = ActivityManager.getService();
try {
if (extras != null) {
extras.setAllowFds(false);
}
mgr.finishReceiver(this, resultCode, data, extras, false, intent.getFlags());
} catch (RemoteException e) {
throw e.rethrowFromSystemServer();
}
}
}
調用了分析 一ReceiverDispatcher的performReceive函數
public void performReceive(Intent intent, int resultCode, String data,
Bundle extras, boolean ordered, boolean sticky, int sendingUser) {
//分析1
final Args args = new Args(intent, resultCode, data, extras, ordered,
sticky, sendingUser);
...
//分析2
if (intent == null || !mActivityThread.post(args.getRunnable())) {
if (mRegistered && ordered) {
IActivityManager mgr = ActivityManager.getService();
args.sendFinished(mgr);
}
}
}
ReceiverDispatcher.performReceive函數中分析1將相關數據封裝成內部類Args類型的args,然后在分析2通過Handler類型的mActivityThread執行getRunnable返回的Runable對象的run函數。這時切換到應用進程的主線程。
Args.getRunnable函數回調了我們注冊廣播是復寫的onReceiver函數。
public final Runnable getRunnable() {
return () -> {
...
ClassLoader cl = mReceiver.getClass().getClassLoader();
intent.setExtrasClassLoader(cl);
intent.prepareToEnterProcess();
setExtrasClassLoader(cl);
receiver.setPendingResult(this);
//調用廣播接收者的onReceive
receiver.onReceive(mContext, intent);
...
}
}
總結
大道至簡，所謂注冊就是在每個地方維持一個集合，實現所謂的增刪改查，根據業務需求增加不同邏輯，例如權限檢查，接收者所在進程的狀態。
以上就是詳解Android廣播Broadcast的啟動流程的詳細內容，更多關于Android Broadcast啟動流程的資料請關注腳本之家其它相關文章！
相關文章
這篇文章主要介紹了Android 密碼 顯示與隱藏功能實例,需要的朋友可以參考下2017-06-06
這篇文章主要為大家介紹了Kotlin協程Context應用使用示例詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2022-12-12
RecyclerView進階：使用ItemTouchHelper實現拖拽和側滑刪除效果
現在RecyclerView的應用越來越廣泛了，本篇文章主要介紹了RecyclerView進階：使用ItemTouchHelper實現拖拽和側滑刪除效果，具有一定的參考價值，有興趣的可以了解一下。2017-02-02
這篇文章主要介紹了Android開發之Parcel機制,實例分析了Parcel機制的原理與實現技巧,需要的朋友可以參考下2015-05-05
Android 自定義view實現進度條加載效果實例代碼
這篇文章主要介紹了Android 自定義view實現進度條加載效果實例代碼,需要的朋友可以參考下2017-08-08
本文主要介紹Android 調試工具,在Android應用開發的過程中肯定會用到Android 調試工具，這里整理了調試工具的使用方法，有需要的小伙伴可以參考下2016-08-08
android ScrollView實現下拉放大頭部圖片
這篇文章主要為大家詳細介紹了android ScrollView實現下拉放大頭部圖片，具有一定的參考價值，感興趣的小伙伴們可以參考一下2017-12-12
這篇文章主要介紹了Android 高仿斗魚滑動驗證碼的相關資料,非常不錯，具有參考借鑒價值，需要的朋友可以參考下2016-11-11
Android項目實戰之仿網易新聞的頁面（RecyclerView ）
這篇文章主要介紹了Android項目實戰之仿網易新聞的頁面，ViewPager作為RecyclerView的Header，感興趣的小伙伴們可以參考一下2016-01-01
Android利用Fragment實現Tab選項卡效果
這篇文章主要為大家詳細介紹了Android利用Fragment實現Tab選項卡效果，具有一定的參考價值，感興趣的小伙伴們可以參考一下2016-08-08