C#聊天程序服務端與客戶端完整實例代碼
更新時間：2014年07月26日 12:41:13 投稿：shichen2014
這篇文章主要介紹了C#聊天程序服務端與客戶端完整實例代碼,很經典的應用,需要的朋友可以參考下
本文所述為基于C#實現的多人聊天程序服務端與客戶端完整代碼。本實例省略了結構定義部分，服務端主要是邏輯處理部分代碼，因此使用時需要完善一些窗體按鈕之類的。
先看服務端代碼如下：
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.Net;
using System.Net.Sockets;
using System.Threading;
namespace 多人聊天程序Server端
{
/// <summary>
/// 應用程序的主入口點。
/// </summary>
[STAThread]
static void Main()
{
Application.Run(new Form1());
}
// 啟動服務按鈕
private void button2_Click(object sender, System.EventArgs e)
{
try
{
// 必須填寫端口
if(txtPort.Text == "")
{
MessageBox.Show("請先填寫服務端口號!", "提示");
return;
}
Int32 port = Int32.Parse(txtPort.Text); // 獲得端口號
// 創建偵聽的Socket
mainSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);
IPEndPoint localEP = new IPEndPoint(IPAddress.Any, port);
// 將 Socket 綁定到本地的終結點上
mainSocket.Bind(localEP);
// 開始偵聽，最大的連接數是 5
mainSocket.Listen(5);
// 開始一個異步操作接受客戶的連接請求
mainSocket.BeginAccept(new AsyncCallback(OnClientConnect), null);
// 啟動服務按鈕不可用，停止服務按鈕可用
UpdateControls(true);
}
catch(SocketException se)
{
MessageBox.Show(se.Message, "提示");
}
}
// 更新“啟動服務按鈕”和“停止服務”按鈕的狀態：是否可用；
// 注意：兩個按鈕的狀態是互斥的
private void UpdateControls(bool onServe)
{
button2.Enabled = !onServe;
button3.Enabled = onServe;
if(onServe)
{
status.Text = "已啟動服務";
}
else
{
status.Text = "未啟動服務";
}
}
// 回調函數，當客戶連接上時，將會被調用
public void OnClientConnect(IAsyncResult asyn)
{
try
{
// 調用EndAccept完成BeginAccept異步調用，返回一個新的Socket處理與客戶的通信
Socket workerSocket = mainSocket.EndAccept(asyn);
// 增加客戶數目
Interlocked.Increment(ref clientNum);
// 將 workerSocket Socket加入到 ArrayList 中
workerSocketList.Add(workerSocket);
// 發送歡迎信息給連接上服務器的客戶
string msg = "歡迎客戶 " + clientNum + " 登錄服務器\n";
SendWelcomeToClient(msg, clientNum);
// 在線客戶數目改變，必須更新客戶列表
UpdateClientListControl();
// 連接上的客戶接收數據
WaitForData(workerSocket, clientNum);
// 主 Socket 返回，繼續等待其它的連接請求
mainSocket.BeginAccept(new AsyncCallback(OnClientConnect), null);
}
catch(ObjectDisposedException)
{
System.Diagnostics.Debugger.Log(0,"1","\n OnClientConnection: Socket已經關閉!\n");
}
catch(SocketException se)
{
MessageBox.Show(se.Message, "提示");
}
}
// 發送歡迎信息給客戶
void SendWelcomeToClient(string msg, int clientNumber)
{
// 用UTF8格式來將string信息轉化成byte數組形式
byte[] byData = System.Text.Encoding.UTF8.GetBytes(msg);
// 獲得客戶clientNumber對應的Socket
Socket workerSocket = (Socket)workerSocketList[clientNumber - 1];
// 將數據發給客戶
workerSocket.Send(byData);
}
// 該類保存當前的socket，它的客戶號還有發送給服務器的數據
public class SocketPacket
{
public System.Net.Sockets.Socket currentSocket; // 當前的Socket
public int clientNumber; // 客戶號
public byte[] dataBuffer = new byte[1024]; // 發給服務器的數據
// 構造函數
public SocketPacket(System.Net.Sockets.Socket socket, int clientNumber)
{
currentSocket = socket;
this.clientNumber = clientNumber;
}
}
// 開始等待客戶發送數據
public void WaitForData(System.Net.Sockets.Socket socket, int clientNumber)
{
try
{
if(pfnWorkerCallBack == null)
{
// 當連接上的客戶有寫的操作的時候，調用回調函數
pfnWorkerCallBack = new AsyncCallback(OnDataReceived);
}
SocketPacket socketPacket = new SocketPacket(socket, clientNumber);
socket.BeginReceive(socketPacket.dataBuffer, 0, socketPacket.dataBuffer.Length,
SocketFlags.None, pfnWorkerCallBack, socketPacket);
}
catch(SocketException se)
{
MessageBox.Show (se.Message, "提示");
}
}
// 當客戶寫數據時，調用以下方法
public void OnDataReceived(IAsyncResult asyn)
{
SocketPacket socketData = (SocketPacket)asyn.AsyncState ;
try
{
// EndReceive完成BeginReceive異步調用，返回客戶寫入流的字節數
int iRx = socketData.currentSocket.EndReceive(asyn);
// 加 1 是因為字符串以 '\0' 作為結束標志符
char[] chars = new char[iRx + 1];
// 對客戶發來的信息進行UTF8解碼，存入chars字符數組中
System.Text.Decoder decoder = System.Text.Encoding.UTF8.GetDecoder();
int charLen = decoder.GetChars(socketData.dataBuffer, 0, iRx, chars, 0);
System.String szData = new System.String(chars);
string msg = "客戶 " + socketData.clientNumber + " 發的信息:" + szData;
// 將客戶發的數據加入到信息列表中
AppendToRichEditControl(msg);
// 等待數據
WaitForData(socketData.currentSocket, socketData.clientNumber);
}
catch (ObjectDisposedException )
{
System.Diagnostics.Debugger.Log(0,"1","\nOnDataReceived: Socket已經關閉!\n");
}
catch(SocketException se)
{
if(se.ErrorCode == 10054)
{
// 將客戶斷開連接的信息寫入信息列表中
string msg = "客戶 " + socketData.clientNumber + " 已斷開了連接!" + "\n";
AppendToRichEditControl(msg);
// 移走已關閉的socket
workerSocketList[socketData.clientNumber - 1] = null;
// 更新客戶列表
UpdateClientListControl();
}
else
{
MessageBox.Show (se.Message, "提示");
}
}
}
// 更新信息列表，該方法可由主線程或其他工作線程所調用
private void AppendToRichEditControl(string msg)
{
// 測試看是哪個線程調用了該方法
if (InvokeRequired)
{
// We cannot update the GUI on this thread.
// All GUI controls are to be updated by the main (GUI) thread.
// Hence we will use the invoke method on the control which will
// be called when the Main thread is free
// Do UI update on UI thread
object[] pList = {msg};
txtRecvMsg.BeginInvoke(new UpdateRichEditCallback(OnUpdateRichEdit), pList);
}
else
{
// 創建該控件的主線程直接更新信息列表
OnUpdateRichEdit(msg);
}
}
// 添加信息到 txtRecvMsg 中
private void OnUpdateRichEdit(string msg)
{
// txtRecvMsg.AppendText(msg);
txtRecvMsg.Text = txtRecvMsg.Text + msg;
}
// 更新客戶列表
private void UpdateClientListControl()
{
if (InvokeRequired) // Is this called from a thread other than the one created
// the control
{
clientList.BeginInvoke(new UpdateClientListCallback(UpdateClientList), null);
}
else
{
// 創建該控件的主線程直接更新信息列表
UpdateClientList();
}
}
// 更新客戶列表
void UpdateClientList()
{
clientList.Items.Clear(); // 清空客戶列表
for(int i = 0; i < workerSocketList.Count; i++)
{
// 加1，是因為數組從下標0開始，而我們的客戶標號是從1開始
string clientKey = Convert.ToString(i + 1);
Socket workerSocket = (Socket)workerSocketList[i];
if(workerSocket != null)
{
// 將連接著服務器的客戶添加到客戶列表中
if(workerSocket.Connected)
{
clientList.Items.Add(clientKey);
}
}
}
}
// 停止服務按鈕
private void button3_Click(object sender, System.EventArgs e)
{
CloseSockets();
UpdateControls(false);
// 更新客戶列表
UpdateClientListControl();
}
// 發送信息按鈕
private void button1_Click(object sender, System.EventArgs e)
{
// 如果在線客戶列表不為空，則允許發送信息
if (clientList.Items.Count != 0 )
{
try
{
string msg = txtSendMsg.Text;
msg = "服務器信息: " + msg + "\n";
byte[] byData = System.Text.Encoding.UTF8.GetBytes(msg);
Socket workerSocket = null;
for(int i = 0; i < workerSocketList.Count; i++)
{
workerSocket = (Socket)workerSocketList[i];
if(workerSocket!= null)
{
// 發給所有連接上服務器的客戶
if(workerSocket.Connected)
{
workerSocket.Send(byData);
}
}
}
}
catch(SocketException se)
{
MessageBox.Show(se.Message, "提示");
}
}
else
{
MessageBox.Show("沒有在線客戶,不能發送信息!", "提示");
}
}
// 清空信息按鈕
private void button4_Click(object sender, System.EventArgs e)
{
txtRecvMsg.Clear(); // 清空從客戶發來的信息
}
// 關閉窗體按鈕
private void button5_Click(object sender, System.EventArgs e)
{
CloseSockets();
Close();
}
// 關閉Socket
void CloseSockets()
{
// 關閉主Socket
if(mainSocket != null)
{
mainSocket.Close();
}
Socket workerSocket = null;
// 關閉客戶 Socket 數組
for(int i = 0; i < workerSocketList.Count; i++)
{
workerSocket = (Socket)workerSocketList[i];
if(workerSocket != null)
{
workerSocket.Close();
workerSocket = null;
}
}
}
private void Form1_Load(object sender, System.EventArgs e)
{
try
{
// 獲得本機的IP地址
txtIP.Text = Dns.Resolve(Dns.GetHostName()).AddressList[0].ToString();
// 啟動時，啟動服務按鈕可用，停止服務按鈕不可用
UpdateControls(false);
}
catch(Exception exc)
{
MessageBox.Show(exc.Message, "提示");
}
}
}
}
客戶端主要實現接收來自服務端返回的消息、實現發送消息的操作界面，創建Socket實例，得到服務器的IP地址，更新控件，連接和斷開等，具體代碼如下：
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.Net;
using System.Net.Sockets;
namespace 多人聊天程序Client端
{
public class Form1 : System.Windows.Forms.Form
{
private System.Windows.Forms.Label label1;
private System.Windows.Forms.TextBox txtIP;
private System.Windows.Forms.Label label2;
private System.Windows.Forms.Label label3;
private System.Windows.Forms.RichTextBox txtSendMsg;
private System.Windows.Forms.Label label4;
private System.Windows.Forms.Button button1;
private System.Windows.Forms.Button button2;
private System.Windows.Forms.Button button3;
private System.Windows.Forms.Button button4;
private System.Windows.Forms.RichTextBox txtRecvMsg;
private System.Windows.Forms.TextBox txtPort;
private System.Windows.Forms.Button button5;
private System.ComponentModel.Container components = null;
byte[] m_dataBuffer = new byte[10];
IAsyncResult result;
public AsyncCallback pfnCallBack ;
private System.Windows.Forms.Label status;
private System.Windows.Forms.Label label5;
public Socket clientSocket;
public Form1()
{
InitializeComponent();
}
private void InitializeComponent()
{
this.label1 = new System.Windows.Forms.Label();
this.txtIP = new System.Windows.Forms.TextBox();
this.label2 = new System.Windows.Forms.Label();
this.txtPort = new System.Windows.Forms.TextBox();
this.label3 = new System.Windows.Forms.Label();
this.txtSendMsg = new System.Windows.Forms.RichTextBox();
this.label4 = new System.Windows.Forms.Label();
this.status = new System.Windows.Forms.Label();
this.txtRecvMsg = new System.Windows.Forms.RichTextBox();
this.button1 = new System.Windows.Forms.Button();
this.button2 = new System.Windows.Forms.Button();
this.button3 = new System.Windows.Forms.Button();
this.button4 = new System.Windows.Forms.Button();
this.label5 = new System.Windows.Forms.Label();
this.button5 = new System.Windows.Forms.Button();
this.SuspendLayout();
// label1
this.label1.AutoSize = true;
this.label1.Location = new System.Drawing.Point(16, 24);
this.label1.Name = "label1";
this.label1.Size = new System.Drawing.Size(60, 17);
this.label1.TabIndex = 0;
this.label1.Text = "服務器IP:";
// txtIP
this.txtIP.Location = new System.Drawing.Point(80, 24);
this.txtIP.Name = "txtIP";
this.txtIP.Size = new System.Drawing.Size(160, 21);
this.txtIP.TabIndex = 1;
this.txtIP.Text = "";
// label2
this.label2.AutoSize = true;
this.label2.Location = new System.Drawing.Point(16, 56);
this.label2.Name = "label2";
this.label2.Size = new System.Drawing.Size(35, 17);
this.label2.TabIndex = 2;
this.label2.Text = "端口:";
// txtPort
this.txtPort.Location = new System.Drawing.Point(80, 56);
this.txtPort.Name = "txtPort";
this.txtPort.Size = new System.Drawing.Size(40, 21);
this.txtPort.TabIndex = 3;
this.txtPort.Text = "";
// label3
this.label3.AutoSize = true;
this.label3.Location = new System.Drawing.Point(16, 96);
this.label3.Name = "label3";
this.label3.Size = new System.Drawing.Size(110, 17);
this.label3.TabIndex = 4;
this.label3.Text = "發送信息給服務器:";
// txtSendMsg
this.txtSendMsg.Location = new System.Drawing.Point(16, 120);
this.txtSendMsg.Name = "txtSendMsg";
this.txtSendMsg.Size = new System.Drawing.Size(224, 88);
this.txtSendMsg.TabIndex = 5;
this.txtSendMsg.Text = "";
// label4
this.label4.AutoSize = true;
this.label4.Location = new System.Drawing.Point(16, 248);
this.label4.Name = "label4";
this.label4.Size = new System.Drawing.Size(60, 17);
this.label4.TabIndex = 6;
this.label4.Text = "連接狀態:";
// status
this.status.Location = new System.Drawing.Point(80, 248);
this.status.Name = "status";
this.status.Size = new System.Drawing.Size(192, 23);
this.status.TabIndex = 7;
// txtRecvMsg
this.txtRecvMsg.Location = new System.Drawing.Point(264, 80);
this.txtRecvMsg.Name = "txtRecvMsg";
this.txtRecvMsg.ReadOnly = true;
this.txtRecvMsg.Size = new System.Drawing.Size(224, 144);
this.txtRecvMsg.TabIndex = 8;
this.txtRecvMsg.Text = "";
// button1
this.button1.Location = new System.Drawing.Point(280, 16);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(88, 32);
this.button1.TabIndex = 9;
this.button1.Text = "連接";
this.button1.Click += new System.EventHandler(this.button1_Click);
// button2
this.button2.Location = new System.Drawing.Point(384, 16);
this.button2.Name = "button2";
this.button2.Size = new System.Drawing.Size(88, 32);
this.button2.TabIndex = 10;
this.button2.Text = "斷開";
this.button2.Click += new System.EventHandler(this.button2_Click);
// button3
this.button3.Location = new System.Drawing.Point(280, 232);
this.button3.Name = "button3";
this.button3.Size = new System.Drawing.Size(88, 32);
this.button3.TabIndex = 11;
this.button3.Text = "清空信息";
this.button3.Click += new System.EventHandler(this.button3_Click);
// button4
this.button4.Location = new System.Drawing.Point(384, 232);
this.button4.Name = "button4";
this.button4.Size = new System.Drawing.Size(88, 32);
this.button4.TabIndex = 12;
this.button4.Text = "關閉";
this.button4.Click += new System.EventHandler(this.button4_Click);
// label5
this.label5.AutoSize = true;
this.label5.Location = new System.Drawing.Point(264, 64);
this.label5.Name = "label5";
this.label5.Size = new System.Drawing.Size(134, 17);
this.label5.TabIndex = 13;
this.label5.Text = "收到服務器發來的信息:";
// button5
this.button5.Location = new System.Drawing.Point(16, 208);
this.button5.Name = "button5";
this.button5.Size = new System.Drawing.Size(224, 32);
this.button5.TabIndex = 14;
this.button5.Text = "發送信息";
this.button5.Click += new System.EventHandler(this.button5_Click);
// Form1
this.AutoScaleBaseSize = new System.Drawing.Size(6, 14);
this.ClientSize = new System.Drawing.Size(512, 277);
this.Controls.Add(this.button5);
this.Controls.Add(this.label5);
this.Controls.Add(this.button4);
this.Controls.Add(this.button3);
this.Controls.Add(this.button2);
this.Controls.Add(this.button1);
this.Controls.Add(this.txtRecvMsg);
this.Controls.Add(this.status);
this.Controls.Add(this.label4);
this.Controls.Add(this.txtSendMsg);
this.Controls.Add(this.label3);
this.Controls.Add(this.txtPort);
this.Controls.Add(this.label2);
this.Controls.Add(this.txtIP);
this.Controls.Add(this.label1);
this.Name = "Form1";
this.Text = "多人聊天程序Client端";
this.Load += new System.EventHandler(this.Form1_Load);
this.ResumeLayout(false);
}
#endregion
[STAThread]
static void Main()
{
Application.Run(new Form1());
}
// 連接按鈕
private void button1_Click(object sender, System.EventArgs e)
{
// IP地址和端口號不能為空
if(txtIP.Text == "" || txtPort.Text == "")
{
MessageBox.Show("請先完整填寫服務器IP地址和端口號!", "提示");
return;
}
try
{
// 創建Socket實例
clientSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);
// 得到服務器的IP地址
IPAddress ipAddress = IPAddress.Parse(txtIP.Text);
Int32 port = Int32.Parse(txtPort.Text);
// 創建遠程終結點
IPEndPoint remoteEP = new IPEndPoint(ipAddress, port);
// 連接到遠程服務器
clientSocket.Connect(remoteEP);
if(clientSocket.Connected)
{
UpdateControls(true);
WaitForData(); // 異步等待數據
}
}
catch(SocketException se)
{
MessageBox.Show (se.Message, "提示");
UpdateControls(false);
}
}
// 等待數據
public void WaitForData()
{
try
{
if(pfnCallBack == null)
{
// 當連接上的客戶有寫的操作的時候，調用回調函數
pfnCallBack = new AsyncCallback(OnDataReceived);
}
SocketPacket socketPacket = new SocketPacket();
socketPacket.thisSocket = clientSocket;
result = clientSocket.BeginReceive(socketPacket.dataBuffer, 0, socketPacket.dataBuffer.Length,
SocketFlags.None, pfnCallBack, socketPacket);
}
catch(SocketException se)
{
MessageBox.Show(se.Message, "提示");
}
}
// 該類保存Socket以及發送給服務器的數據
public class SocketPacket
{
public System.Net.Sockets.Socket thisSocket;
public byte[] dataBuffer = new byte[1024]; // 發給服務器的數據
}
// 接收數據
public void OnDataReceived(IAsyncResult asyn)
{
try
{
SocketPacket theSockId = (SocketPacket)asyn.AsyncState ;
// EndReceive完成BeginReceive異步調用，返回服務器寫入流的字節數
int iRx = theSockId.thisSocket.EndReceive(asyn);
// 加 1 是因為字符串以 '\0' 作為結束標志符
char[] chars = new char[iRx + 1];
// 用UTF8格式來將string信息轉化成byte數組形式
System.Text.Decoder decoder = System.Text.Encoding.UTF8.GetDecoder();
int charLen = decoder.GetChars(theSockId.dataBuffer, 0, iRx, chars, 0);
System.String szData = new System.String(chars);
// 將收到的信息顯示在信息列表中
txtRecvMsg.Text = txtRecvMsg.Text + szData;
// 等待數據
WaitForData();
}
catch (ObjectDisposedException)
{
System.Diagnostics.Debugger.Log(0,"1","\nOnDataReceived: Socket已經關閉!\n");
}
catch(SocketException se)
{
if(se.ErrorCode == 10054)
{
string msg = "服務器" + "停止服務!" + "\n";
txtRecvMsg.Text = txtRecvMsg.Text + msg;
clientSocket.Close();
clientSocket = null;
UpdateControls(false);
}
else
{
MessageBox.Show(se.Message, "提示");
}
}
}
// 更新控件。連接和斷開（發送信息）按鈕的狀態是互斥的
private void UpdateControls(bool connected)
{
button1.Enabled = !connected;
button2.Enabled = connected;
button5.Enabled = connected;
if(connected)
{
status.Text = "已連接";
}
else
{
status.Text = "無連接";
}
}
// 斷開按鈕
private void button2_Click(object sender, System.EventArgs e)
{
// 關閉Socket
if(clientSocket != null)
{
clientSocket.Close();
clientSocket = null;
UpdateControls(false);
}
}
// 發送信息按鈕
private void button5_Click(object sender, System.EventArgs e)
{
try
{
// 如果客戶與服務器有連接，則允許發送信息
if(clientSocket.Connected)
{
string msg = txtSendMsg.Text + "\n";
// 用UTF8格式來將string信息轉化成byte數組形式
byte[] byData = System.Text.Encoding.UTF8.GetBytes(msg);
if(clientSocket != null)
{
// 發送數據
clientSocket.Send(byData);
}
}
}
catch(Exception se)
{
MessageBox.Show(se.Message, "提示");
}
}
// 清空按鈕
private void button3_Click(object sender, System.EventArgs e)
{
txtRecvMsg.Clear(); // 清空信息列表
}
// 關閉按鈕
private void button4_Click(object sender, System.EventArgs e)
{
// 關閉Socket
if(clientSocket != null)
{
clientSocket.Close();
clientSocket = null;
}
Close(); // 關閉窗體
}
private void Form1_Load(object sender, System.EventArgs e)
{
UpdateControls(false); // 初始化時，只有連接按鈕可用
}
}
}
相關文章
這篇文章介紹了C#中Dispose和Finalize方法的用法，文中通過示例代碼介紹的非常詳細。對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-03-03
在C#中，數據類型分為值類型和引用類型兩種，引用類型變量存儲的是數據的引用，而值類型變量直接存儲數據，下面小編就來和大家講講這二者的使用與區別吧2023-07-07
今天小編就為大家分享一篇關于C#實現Word轉為PDF的方法，小編覺得內容挺不錯的，現在分享給大家，具有很好的參考價值，需要的朋友一起跟隨小編來看看吧2019-01-01
這篇文章主要介紹了C#擴展方法原理及其使用的的相關資料，文中代碼非常細致，幫助大家更好的理解和學習，感興趣的朋友可以了解下2020-06-06
WPF利用ValueConverter實現值轉換器
值轉換器在WPF開發中是非常常見的，值轉換器可以幫助我們很輕松地實現，界面數據展示的問題。本文將通過WPF?ValueConverter實現簡單的值轉換器，希望對大家有所幫助2023-03-03
委托這個名字取的神乎其神的，但實質是函數式編程，把函數作為參數傳遞給另一個參數。這篇文章主要為大家介紹一下C#中委托的概念與使用，需要的可以參考一下2023-02-02
C#實現將PPT轉換成HTML的方法
這篇文章主要介紹了C#實現將PPT轉換成HTML的方法,非常實用的功能,需要的朋友可以參考下2014-08-08
本篇文章是對C#多線程中l(wèi)ock關鍵字的使用進行了詳細的分析介紹，需要的朋友參考下2013-06-06
這篇文章主要給大家介紹了關于如何利用C#打印九九乘法表的相關資料，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2020-12-12
關于C#操作文件路徑(Directory)的常用靜態方法詳解
這篇文章主要給大家介紹了關于C#操作文件路徑(Directory)的常用靜態方法,Directory類位于System.IO 命名空間,Directory類提供了在目錄和子目錄中進行創建移動和列舉操作的靜態方法,需要的朋友可以參考下2021-08-08