# 必需依賴
pip install PyQt5
# FFmpeg需要單獨安裝
# Windows: 下載并添加至PATH
# macOS: brew install ffmpeg
# Linux: sudo apt install ffmpeg

def get_audio_duration(self, file_path):
    """使用ffprobe獲取音頻時長"""
    cmd = ['ffprobe', '-v', 'error', '-show_entries', 
          'format=duration', '-of', 'default=noprint_wrappers=1:nokey=1', file_path]
    result = subprocess.run(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE, text=True)
    return float(result.stdout.strip())

# 正則表達式匹配FFmpeg輸出
self.duration_regex = re.compile(r"Duration: (\d{2}):(\d{2}):(\d{2})\.\d{2}")
self.time_regex = re.compile(r"time=(\d{2}):(\d{2}):(\d{2})\.\d{2}")

# 在輸出中匹配時間信息
time_match = self.time_regex.search(line)
if time_match:
    hours, minutes, seconds = map(int, time_match.groups())
    current_time = hours * 3600 + minutes * 60 + seconds
    progress = min(100, int((current_time / duration) * 100))

def dragEnterEvent(self, event: QDragEnterEvent):
    if event.mimeData().hasUrls():
        event.acceptProposedAction()

def dropEvent(self, event: QDropEvent):
    urls = event.mimeData().urls()
    for url in urls:
        file_path = url.toLocalFile()
        # 處理文件或文件夾

class AudioConverterThread(QThread):
    progress_updated = pyqtSignal(int, str, str)  # 信號定義
    conversion_finished = pyqtSignal(str, bool, str)
    
    def run(self):
        # 轉換邏輯實現
        for input_file in self.input_files:
            # 構建FFmpeg命令
            cmd = ['ffmpeg', '-i', input_file, '-y']
            # ...參數設置...
            
            # 執行轉換
            process = subprocess.Popen(cmd, stderr=subprocess.PIPE)
            
            # 進度解析循環
            while True:
                line = process.stderr.readline()
                # ...解析進度...
                self.progress_updated.emit(progress, message, filename)

def set_quality_preset(self):
    """根據預設設置默認參數"""
    if self.quality_preset == "high":
        self.bitrate = self.bitrate or 320
        self.samplerate = self.samplerate or 48000
    elif self.quality_preset == "medium":
        self.bitrate = self.bitrate or 192
        self.samplerate = self.samplerate or 44100
    elif self.quality_preset == "low":
        self.bitrate = self.bitrate or 128
        self.samplerate = self.samplerate or 22050

def estimate_sizes(self):
    # 對于WAV格式，大小與時長和采樣率成正比
    if self.output_format == "wav":
        estimated_size = input_size * 1.2  # 粗略估計
    else:
        # 對于有損壓縮格式，大小=比特率×?xí)r長
        duration = self.get_audio_duration(input_file)
        estimated_size = (self.bitrate * 1000 * duration) / 8  # bit to bytes

self.setStyleSheet("""
    QMainWindow {
        background-color: #f5f5f5;
    }
    QGroupBox {
        border: 1px solid #ddd;
        border-radius: 8px;
        margin-top: 10px;
    }
    QPushButton {
        background-color: #4CAF50;
        color: white;
        border-radius: 4px;
    }
    QProgressBar::chunk {
        background-color: #4CAF50;
    }
""")

import os
import sys
import subprocess
from PyQt5.QtWidgets import (QApplication, QMainWindow, QWidget, QVBoxLayout, QHBoxLayout, 
                             QLabel, QPushButton, QListWidget, QFileDialog, QComboBox, 
                             QProgressBar, QMessageBox, QGroupBox, QSpinBox, QCheckBox, 
                             QSizePolicy, QRadioButton, QButtonGroup)
from PyQt5.QtCore import Qt, QThread, pyqtSignal, QUrl, QMimeData
from PyQt5.QtGui import QFont, QIcon, QColor, QPalette, QDragEnterEvent, QDropEvent

class AudioConverterThread(QThread):
    progress_updated = pyqtSignal(int, str)
    conversion_finished = pyqtSignal(str, bool, str)
    estimation_ready = pyqtSignal(dict)
    
    def __init__(self, input_files, output_format, output_dir, quality_preset="medium", 
                 bitrate=None, samplerate=None, remove_original=False, estimate_only=False):
        super().__init__()
        self.input_files = input_files
        self.output_format = output_format
        self.output_dir = output_dir
        self.quality_preset = quality_preset
        self.bitrate = bitrate
        self.samplerate = samplerate
        self.remove_original = remove_original
        self.estimate_only = estimate_only
        self.canceled = False
        
        # 根據品質預設設置默認參數
        self.set_quality_preset()
        
    def set_quality_preset(self):
        if self.quality_preset == "high":
            self.bitrate = self.bitrate or 320
            self.samplerate = self.samplerate or 48000
        elif self.quality_preset == "medium":
            self.bitrate = self.bitrate or 192
            self.samplerate = self.samplerate or 44100
        elif self.quality_preset == "low":
            self.bitrate = self.bitrate or 128
            self.samplerate = self.samplerate or 22050
    
    def run(self):
        total_files = len(self.input_files)
        total_size = 0
        estimated_sizes = {}
        
        for i, input_file in enumerate(self.input_files):
            if self.canceled:
                break
                
            try:
                # 獲取文件信息
                filename = os.path.basename(input_file)
                base_name = os.path.splitext(filename)[0]
                output_file = os.path.join(self.output_dir, f"{base_name}.{self.output_format}")
                input_size = os.path.getsize(input_file)
                
                # 如果是預估模式
                if self.estimate_only:
                    # 簡化的預估算法 (實際大小會因編碼效率而異)
                    if self.output_format == "wav":
                        # WAV通常是未壓縮的，大小與采樣率/位深相關
                        estimated_size = input_size * 1.2  # 粗略估計
                    else:
                        # 壓縮格式基于比特率估算
                        duration = self.get_audio_duration(input_file)
                        estimated_size = (self.bitrate * 1000 * duration) / 8  # bit to bytes
                    
                    estimated_sizes[filename] = {
                        'input_size': input_size,
                        'estimated_size': int(estimated_size),
                        'input_path': input_file,
                        'output_path': output_file
                    }
                    continue
                
                # 構建FFmpeg命令
                cmd = ['ffmpeg', '-i', input_file, '-y']  # -y 覆蓋已存在文件
                
                # 添加音頻參數
                if self.bitrate:
                    cmd.extend(['-b:a', f'{self.bitrate}k'])
                if self.samplerate:
                    cmd.extend(['-ar', str(self.samplerate)])
                
                cmd.append(output_file)
                
                # 執行轉換
                process = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE, 
                                         universal_newlines=True, bufsize=1)
                
                # 讀取進度
                for line in process.stderr:
                    if self.canceled:
                        process.terminate()
                        break
                    
                    # 解析進度信息
                    if 'time=' in line:
                        time_pos = line.find('time=')
                        time_str = line[time_pos+5:time_pos+14]
                        self.progress_updated.emit(int((i + 1) / total_files * 100), f"處理: {filename} ({time_str})")
                
                process.wait()
                
                if process.returncode == 0:
                    # 如果選擇刪除原文件
                    if self.remove_original:
                        os.remove(input_file)
                    
                    output_size = os.path.getsize(output_file)
                    total_size += output_size
                    self.conversion_finished.emit(input_file, True, 
                                                f"成功: {filename} ({self.format_size(output_size)})")
                else:
                    self.conversion_finished.emit(input_file, False, 
                                                f"失敗: {filename} (錯誤代碼: {process.returncode})")
                
            except Exception as e:
                self.conversion_finished.emit(input_file, False, f"錯誤: {filename} ({str(e)})")
            
            # 更新進度
            if not self.estimate_only:
                progress = int((i + 1) / total_files * 100)
                self.progress_updated.emit(progress, f"處理文件 {i+1}/{total_files}")
        
        if self.estimate_only:
            self.estimation_ready.emit(estimated_sizes)
    
    def get_audio_duration(self, file_path):
        """獲取音頻文件時長(秒)"""
        try:
            cmd = ['ffprobe', '-v', 'error', '-show_entries', 
                  'format=duration', '-of', 'default=noprint_wrappers=1:nokey=1', file_path]
            result = subprocess.run(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE, text=True)
            return float(result.stdout.strip())
        except:
            return 180  # 默認3分鐘 (如果無法獲取時長)
    
    @staticmethod
    def format_size(size):
        """格式化文件大小顯示"""
        for unit in ['B', 'KB', 'MB', 'GB']:
            if size < 1024.0:
                return f"{size:.1f} {unit}"
            size /= 1024.0
        return f"{size:.1f} TB"

class AudioConverterApp(QMainWindow):
    def __init__(self):
        super().__init__()
        self.setWindowTitle("音頻格式轉換工具")
        self.setGeometry(100, 100, 900, 700)
        self.setWindowIcon(QIcon.fromTheme("multimedia-volume-control"))
        
        # 初始化變量
        self.input_files = []
        self.output_dir = ""
        self.converter_thread = None
        
        # 設置樣式
        self.setup_ui_style()
        
        # 初始化UI
        self.init_ui()
        
        self.setAcceptDrops(True)
        
    def setup_ui_style(self):
        # 設置應用程序樣式
        self.setStyleSheet("""
            QMainWindow {
                background-color: #f5f5f5;
            }
            QGroupBox {
                border: 1px solid #ddd;
                border-radius: 8px;
                margin-top: 10px;
                padding-top: 15px;
                font-weight: bold;
                color: #555;
                background-color: white;
            }
            QGroupBox::title {
                subcontrol-origin: margin;
                left: 10px;
                padding: 0 3px;
            }
            QPushButton {
                background-color: #4CAF50;
                color: white;
                border: none;
                padding: 8px 16px;
                border-radius: 4px;
                font-size: 14px;
                min-width: 100px;
            }
            QPushButton:hover {
                background-color: #45a049;
            }
            QPushButton:disabled {
                background-color: #cccccc;
            }
            QPushButton#cancelButton {
                background-color: #f44336;
            }
            QPushButton#cancelButton:hover {
                background-color: #d32f2f;
            }
            QListWidget {
                background-color: white;
                border: 1px solid #ddd;
                border-radius: 4px;
                padding: 5px;
            }
            QProgressBar {
                border: 1px solid #ddd;
                border-radius: 4px;
                text-align: center;
                height: 20px;
            }
            QProgressBar::chunk {
                background-color: #4CAF50;
                width: 10px;
            }
            QComboBox, QSpinBox {
                padding: 5px;
                border: 1px solid #ddd;
                border-radius: 4px;
                background-color: white;
                min-width: 120px;
            }
            QRadioButton {
                spacing: 5px;
            }
            QLabel#sizeLabel {
                color: #666;
                font-size: 13px;
            }
            QLabel#titleLabel {
                color: #2c3e50;
            }
        """)
        
        # 設置調色板
        palette = self.palette()
        palette.setColor(QPalette.Window, QColor(245, 245, 245))
        palette.setColor(QPalette.WindowText, QColor(51, 51, 51))
        palette.setColor(QPalette.Base, QColor(255, 255, 255))
        palette.setColor(QPalette.AlternateBase, QColor(240, 240, 240))
        palette.setColor(QPalette.ToolTipBase, QColor(255, 255, 220))
        palette.setColor(QPalette.ToolTipText, QColor(0, 0, 0))
        palette.setColor(QPalette.Text, QColor(0, 0, 0))
        palette.setColor(QPalette.Button, QColor(240, 240, 240))
        palette.setColor(QPalette.ButtonText, QColor(0, 0, 0))
        palette.setColor(QPalette.BrightText, QColor(255, 0, 0))
        palette.setColor(QPalette.Highlight, QColor(76, 175, 80))
        palette.setColor(QPalette.HighlightedText, QColor(255, 255, 255))
        self.setPalette(palette)
        
    def init_ui(self):
        # 主窗口部件
        central_widget = QWidget()
        self.setCentralWidget(central_widget)
        
        # 主布局
        main_layout = QVBoxLayout(central_widget)
        main_layout.setSpacing(15)
        main_layout.setContentsMargins(20, 20, 20, 20)
        
        # 標題
        title_label = QLabel("?? 音頻格式轉換工具")
        title_label.setObjectName("titleLabel")
        title_label.setFont(QFont("Arial", 18, QFont.Bold))
        title_label.setAlignment(Qt.AlignCenter)
        main_layout.addWidget(title_label)
        
        # 文件選擇區域
        file_group = QGroupBox("?? 選擇音頻文件 (支持拖拽文件到此處)")
        file_layout = QVBoxLayout()
        
        self.file_list = QListWidget()
        self.file_list.setSelectionMode(QListWidget.ExtendedSelection)
        
        file_button_layout = QHBoxLayout()
        
        self.add_file_btn = QPushButton("? 添加文件")
        self.add_file_btn.clicked.connect(self.add_files)
        
        self.add_folder_btn = QPushButton("?? 添加文件夾")
        self.add_folder_btn.clicked.connect(self.add_folder)
        
        self.clear_btn = QPushButton("? 清空列表")
        self.clear_btn.clicked.connect(self.clear_files)
        
        file_button_layout.addWidget(self.add_file_btn)
        file_button_layout.addWidget(self.add_folder_btn)
        file_button_layout.addWidget(self.clear_btn)
        
        file_layout.addWidget(self.file_list)
        file_layout.addLayout(file_button_layout)
        file_group.setLayout(file_layout)
        main_layout.addWidget(file_group)
        
        # 輸出設置區域
        output_group = QGroupBox("?? 輸出設置")
        output_layout = QHBoxLayout()
        
        # 輸出格式
        format_layout = QVBoxLayout()
        format_label = QLabel("??? 輸出格式:")
        self.format_combo = QComboBox()
        self.format_combo.addItems(["mp3", "wav", "flac", "aac", "ogg", "m4a"])
        format_layout.addWidget(format_label)
        format_layout.addWidget(self.format_combo)
        
        # 輸出目錄
        dir_layout = QVBoxLayout()
        dir_label = QLabel("?? 輸出目錄:")
        self.dir_btn = QPushButton("選擇目錄")
        self.dir_btn.clicked.connect(self.select_output_dir)
        self.dir_label = QLabel("(默認: 原文件目錄)")
        self.dir_label.setWordWrap(True)
        dir_layout.addWidget(dir_label)
        dir_layout.addWidget(self.dir_btn)
        dir_layout.addWidget(self.dir_label)
        
        # 其他選項
        options_layout = QVBoxLayout()
        self.remove_original_cb = QCheckBox("??? 轉換后刪除原文件")
        options_layout.addWidget(self.remove_original_cb)
        
        output_layout.addLayout(format_layout)
        output_layout.addLayout(dir_layout)
        output_layout.addLayout(options_layout)
        output_group.setLayout(output_layout)
        main_layout.addWidget(output_group)
        
        # 音質設置區域
        quality_group = QGroupBox("??? 音質設置")
        quality_layout = QHBoxLayout()
        
        # 音質預設
        preset_layout = QVBoxLayout()
        preset_label = QLabel("?? 音質預設:")
        
        self.quality_group = QButtonGroup()
        self.high_quality_rb = QRadioButton("?? 高質量 (320kbps, 48kHz)")
        self.medium_quality_rb = QRadioButton("?? 中等質量 (192kbps, 44.1kHz)")
        self.low_quality_rb = QRadioButton("?? 低質量 (128kbps, 22kHz)")
        self.custom_quality_rb = QRadioButton("?? 自定義參數")
        
        self.quality_group.addButton(self.high_quality_rb, 0)
        self.quality_group.addButton(self.medium_quality_rb, 1)
        self.quality_group.addButton(self.low_quality_rb, 2)
        self.quality_group.addButton(self.custom_quality_rb, 3)
        
        self.medium_quality_rb.setChecked(True)
        self.quality_group.buttonClicked.connect(self.update_quality_settings)
        
        preset_layout.addWidget(preset_label)
        preset_layout.addWidget(self.high_quality_rb)
        preset_layout.addWidget(self.medium_quality_rb)
        preset_layout.addWidget(self.low_quality_rb)
        preset_layout.addWidget(self.custom_quality_rb)
        
        # 自定義參數
        custom_layout = QVBoxLayout()
        bitrate_layout = QHBoxLayout()
        bitrate_label = QLabel("?? 比特率 (kbps):")
        self.bitrate_spin = QSpinBox()
        self.bitrate_spin.setRange(32, 320)
        self.bitrate_spin.setValue(192)
        self.bitrate_spin.setSpecialValueText("自動")
        bitrate_layout.addWidget(bitrate_label)
        bitrate_layout.addWidget(self.bitrate_spin)
        
        samplerate_layout = QHBoxLayout()
        samplerate_label = QLabel("?? 采樣率 (Hz):")
        self.samplerate_spin = QSpinBox()
        self.samplerate_spin.setRange(8000, 48000)
        self.samplerate_spin.setValue(44100)
        self.samplerate_spin.setSingleStep(1000)
        self.samplerate_spin.setSpecialValueText("自動")
        samplerate_layout.addWidget(samplerate_label)
        samplerate_layout.addWidget(self.samplerate_spin)
        
        custom_layout.addLayout(bitrate_layout)
        custom_layout.addLayout(samplerate_layout)
        
        quality_layout.addLayout(preset_layout)
        quality_layout.addLayout(custom_layout)
        quality_group.setLayout(quality_layout)
        main_layout.addWidget(quality_group)
        
        # 文件大小預估區域
        size_group = QGroupBox("?? 文件大小預估")
        size_layout = QVBoxLayout()
        
        self.size_label = QLabel("?? 添加文件后自動預估輸出大小")
        self.size_label.setObjectName("sizeLabel")
        self.size_label.setWordWrap(True)
        
        self.estimate_btn = QPushButton("?? 重新估算大小")
        self.estimate_btn.clicked.connect(self.estimate_sizes)
        self.estimate_btn.setEnabled(False)
        
        size_layout.addWidget(self.size_label)
        size_layout.addWidget(self.estimate_btn)
        size_group.setLayout(size_layout)
        main_layout.addWidget(size_group)
        
        # 進度條
        self.progress_bar = QProgressBar()
        self.progress_bar.setAlignment(Qt.AlignCenter)
        main_layout.addWidget(self.progress_bar)
        
        # 轉換按鈕
        button_layout = QHBoxLayout()
        self.convert_btn = QPushButton("? 開始轉換")
        self.convert_btn.setFont(QFont("Arial", 12, QFont.Bold))
        self.convert_btn.clicked.connect(self.start_conversion)
        
        self.cancel_btn = QPushButton("?? 取消")
        self.cancel_btn.setObjectName("cancelButton")
        self.cancel_btn.setFont(QFont("Arial", 12))
        self.cancel_btn.clicked.connect(self.cancel_conversion)
        self.cancel_btn.setEnabled(False)
        
        button_layout.addStretch()
        button_layout.addWidget(self.convert_btn)
        button_layout.addWidget(self.cancel_btn)
        button_layout.addStretch()
        main_layout.addLayout(button_layout)
        
        # 狀態欄
        self.statusBar().showMessage("?? 準備就緒")
        
        # 初始化UI狀態
        self.update_quality_settings()
    
    def dragEnterEvent(self, event: QDragEnterEvent):
        if event.mimeData().hasUrls():
            event.acceptProposedAction()
    
    def dropEvent(self, event: QDropEvent):
        urls = event.mimeData().urls()
        new_files = []
        
        for url in urls:
            file_path = url.toLocalFile()
            if os.path.isdir(file_path):
                # 處理文件夾
                audio_files = self.scan_audio_files(file_path)
                new_files.extend(audio_files)
            elif file_path.lower().endswith(('.mp3', '.wav', '.flac', '.aac', '.ogg', '.m4a')):
                # 處理單個文件
                new_files.append(file_path)
        
        if new_files:
            self.input_files.extend(new_files)
            self.file_list.addItems([os.path.basename(f) for f in new_files])
            self.update_status(f"添加了 {len(new_files)} 個文件")
            self.estimate_sizes()
    
    def scan_audio_files(self, folder):
        """掃描文件夾中的音頻文件"""
        audio_files = []
        for root, _, files in os.walk(folder):
            for file in files:
                if file.lower().endswith(('.mp3', '.wav', '.flac', '.aac', '.ogg', '.m4a')):
                    audio_files.append(os.path.join(root, file))
        return audio_files
    
    def add_files(self):
        files, _ = QFileDialog.getOpenFileNames(
            self, "選擇音頻文件", "", 
            "音頻文件 (*.mp3 *.wav *.flac *.aac *.ogg *.m4a);;所有文件 (*.*)"
        )
        
        if files:
            self.input_files.extend(files)
            self.file_list.addItems([os.path.basename(f) for f in files])
            self.update_status(f"添加了 {len(files)} 個文件")
            self.estimate_sizes()
            
    def add_folder(self):
        folder = QFileDialog.getExistingDirectory(self, "選擇文件夾")
        
        if folder:
            audio_files = self.scan_audio_files(folder)
            
            if audio_files:
                self.input_files.extend(audio_files)
                self.file_list.addItems([os.path.basename(f) for f in audio_files])
                self.update_status(f"從文件夾添加了 {len(audio_files)} 個音頻文件")
                self.estimate_sizes()
            else:
                self.update_status("?? 所選文件夾中沒有找到音頻文件", is_error=True)
                
    def clear_files(self):
        self.input_files = []
        self.file_list.clear()
        self.size_label.setText("?? 添加文件后自動預估輸出大小")
        self.update_status("文件列表已清空")
        self.estimate_btn.setEnabled(False)
        
    def select_output_dir(self):
        dir_path = QFileDialog.getExistingDirectory(self, "選擇輸出目錄")
        if dir_path:
            self.output_dir = dir_path
            self.dir_label.setText(dir_path)
            self.update_status(f"輸出目錄設置為: {dir_path}")
            
    def update_status(self, message, is_error=False):
        emoji = "??" if is_error else "??"
        self.statusBar().showMessage(f"{emoji} {message}")
        
    def update_quality_settings(self):
        """根據選擇的音質預設更新UI"""
        if self.high_quality_rb.isChecked():
            self.bitrate_spin.setValue(320)
            self.samplerate_spin.setValue(48000)
            self.bitrate_spin.setEnabled(False)
            self.samplerate_spin.setEnabled(False)
        elif self.medium_quality_rb.isChecked():
            self.bitrate_spin.setValue(192)
            self.samplerate_spin.setValue(44100)
            self.bitrate_spin.setEnabled(False)
            self.samplerate_spin.setEnabled(False)
        elif self.low_quality_rb.isChecked():
            self.bitrate_spin.setValue(128)
            self.samplerate_spin.setValue(22050)
            self.bitrate_spin.setEnabled(False)
            self.samplerate_spin.setEnabled(False)
        else:  # 自定義
            self.bitrate_spin.setEnabled(True)
            self.samplerate_spin.setEnabled(True)
        
        # 只有在有文件時才嘗試估算大小
        if hasattr(self, 'input_files') and self.input_files:
            self.estimate_sizes()
    
    def estimate_sizes(self):
        """預估輸出文件大小"""
        if not self.input_files:
            self.size_label.setText("?? 請先添加要轉換的文件")
            return
            
        output_format = self.format_combo.currentText()
        
        # 如果沒有指定輸出目錄，使用原文件目錄
        output_dir = self.output_dir if self.output_dir else os.path.dirname(self.input_files[0])
        
        # 獲取當前選擇的音質預設
        if self.high_quality_rb.isChecked():
            quality_preset = "high"
        elif self.medium_quality_rb.isChecked():
            quality_preset = "medium"
        elif self.low_quality_rb.isChecked():
            quality_preset = "low"
        else:
            quality_preset = "custom"
        
        # 創建估算線程
        self.size_label.setText("?? 正在估算輸出文件大小...")
        self.estimate_btn.setEnabled(False)
        
        self.converter_thread = AudioConverterThread(
            self.input_files, output_format, output_dir, 
            quality_preset=quality_preset,
            bitrate=self.bitrate_spin.value() if self.bitrate_spin.value() > 0 else None,
            samplerate=self.samplerate_spin.value() if self.samplerate_spin.value() > 0 else None,
            estimate_only=True
        )
        
        self.converter_thread.estimation_ready.connect(self.update_size_estimation)
        self.converter_thread.finished.connect(lambda: self.estimate_btn.setEnabled(True))
        self.converter_thread.start()
    
    def update_size_estimation(self, estimations):
        """更新大小預估顯示"""
        total_input = sum(info['input_size'] for info in estimations.values())
        total_output = sum(info['estimated_size'] for info in estimations.values())
        
        ratio = (total_output / total_input) if total_input > 0 else 0
        ratio_text = f"{ratio:.1%}" if ratio > 0 else "N/A"
        
        text = (f"?? 預估輸出大小:\n"
               f"輸入總大小: {self.format_size(total_input)}\n"
               f"預估輸出總大小: {self.format_size(total_output)}\n"
               f"壓縮率: {ratio_text}")
        
        self.size_label.setText(text)
        self.estimate_btn.setEnabled(True)
    
    @staticmethod
    def format_size(size):
        """格式化文件大小顯示"""
        for unit in ['B', 'KB', 'MB', 'GB']:
            if size < 1024.0:
                return f"{size:.1f} {unit}"
            size /= 1024.0
        return f"{size:.1f} TB"
    
    def start_conversion(self):
        if not self.input_files:
            self.update_status("?? 請先添加要轉換的文件", is_error=True)
            return
            
        output_format = self.format_combo.currentText()
        
        # 如果沒有指定輸出目錄，使用原文件目錄
        if not self.output_dir:
            self.output_dir = os.path.dirname(self.input_files[0])
            self.dir_label.setText("(使用原文件目錄)")
            
        # 獲取音質預設
        if self.high_quality_rb.isChecked():
            quality_preset = "high"
        elif self.medium_quality_rb.isChecked():
            quality_preset = "medium"
        elif self.low_quality_rb.isChecked():
            quality_preset = "low"
        else:
            quality_preset = "custom"
        
        # 獲取其他參數
        bitrate = self.bitrate_spin.value() if self.bitrate_spin.value() > 0 else None
        samplerate = self.samplerate_spin.value() if self.samplerate_spin.value() > 0 else None
        remove_original = self.remove_original_cb.isChecked()
        
        # 禁用UI控件
        self.toggle_ui(False)
        
        # 創建并啟動轉換線程
        self.converter_thread = AudioConverterThread(
            self.input_files, output_format, self.output_dir, 
            quality_preset=quality_preset,
            bitrate=bitrate, samplerate=samplerate, 
            remove_original=remove_original
        )
        
        self.converter_thread.progress_updated.connect(self.update_progress)
        self.converter_thread.conversion_finished.connect(self.conversion_result)
        self.converter_thread.finished.connect(self.conversion_complete)
        
        self.converter_thread.start()
        self.update_status("?? 開始轉換文件...")
        
    def cancel_conversion(self):
        if self.converter_thread and self.converter_thread.isRunning():
            self.converter_thread.canceled = True
            self.update_status("?? 正在取消轉換...")
            self.cancel_btn.setEnabled(False)
            
    def update_progress(self, value, message):
        self.progress_bar.setValue(value)
        self.update_status(message)
        
    def conversion_result(self, filename, success, message):
        base_name = os.path.basename(filename)
        item = self.file_list.findItems(base_name, Qt.MatchExactly)
        if item:
            if success:
                item[0].setForeground(QColor(0, 128, 0))  # 綠色表示成功
            else:
                item[0].setForeground(QColor(255, 0, 0))  # 紅色表示失敗
        
        self.update_status(message, not success)
            
    def conversion_complete(self):
        if self.converter_thread.canceled:
            self.update_status("?? 轉換已取消", is_error=True)
        else:
            self.update_status("?? 所有文件轉換完成!")
            
        # 重置UI
        self.progress_bar.setValue(0)
        self.toggle_ui(True)
        
        # 如果選擇了刪除原文件，清空列表
        if self.remove_original_cb.isChecked():
            self.input_files = []
            self.file_list.clear()
            self.size_label.setText("?? 添加文件后自動預估輸出大小")
            
    def toggle_ui(self, enabled):
        self.add_file_btn.setEnabled(enabled)
        self.add_folder_btn.setEnabled(enabled)
        self.clear_btn.setEnabled(enabled)
        self.format_combo.setEnabled(enabled)
        self.dir_btn.setEnabled(enabled)
        self.high_quality_rb.setEnabled(enabled)
        self.medium_quality_rb.setEnabled(enabled)
        self.low_quality_rb.setEnabled(enabled)
        self.custom_quality_rb.setEnabled(enabled)
        self.bitrate_spin.setEnabled(enabled and self.custom_quality_rb.isChecked())
        self.samplerate_spin.setEnabled(enabled and self.custom_quality_rb.isChecked())
        self.remove_original_cb.setEnabled(enabled)
        self.convert_btn.setEnabled(enabled)
        self.cancel_btn.setEnabled(not enabled)
        self.estimate_btn.setEnabled(enabled and bool(self.input_files))
        
    def closeEvent(self, event):
        if self.converter_thread and self.converter_thread.isRunning():
            reply = QMessageBox.question(
                self, '轉換正在進行中',
                "轉換仍在進行中，確定要退出嗎?",
                QMessageBox.Yes | QMessageBox.No, QMessageBox.No
            )
            
            if reply == QMessageBox.Yes:
                self.converter_thread.canceled = True
                event.accept()
            else:
                event.ignore()
        else:
            event.accept()

if __name__ == "__main__":
    # 檢查FFmpeg是否可用
    try:
        subprocess.run(['ffmpeg', '-version'], check=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
    except FileNotFoundError:
        app = QApplication(sys.argv)
        QMessageBox.critical(
            None, "錯誤", 
            "未找到FFmpeg，請先安裝FFmpeg并確保它在系統路徑中。\n\n"
            "Windows用戶可以從 https://ffmpeg.org/download.html 下載\n"
            "macOS: brew install ffmpeg\n"
            "Linux: sudo apt install ffmpeg"
        )
        sys.exit(1)
        
    app = QApplication(sys.argv)
    converter = AudioConverterApp()
    converter.show()
    sys.exit(app.exec_())