centos7基于keepalived+nginx部署k8s1.26.0高可用集群

更新時間：2025年01月11日 16:46:55 作者：南北二斗

Kubernetes是一個開源的容器編排平臺,用于自動化地部署、擴展和管理容器化應用程序,在生產環境中,為了確保集群的高可用性,我們需要使用多個Master節點來實現冗余和故障切換

一、初始化（所有節點都執行）
二、安裝containerd（所有節點都執行）
三、安裝docker-ce（所有節點都執行）
四、安裝kubelet+kubeadm+kubectl（所有節點都執行）
五、安裝keepalived+nginx（只在master節點執行）
六、kubeadm初始化k8s集群（只在k8s-master1執行）
七、將其他master join到k8s集群（在k8s-master2和k8s-master3執行）
八、將node節點join到k8s集群（只在k8s-node1節點執行）
九、部署calico網絡插件（只在k8s-master1執行）
十、配置etcd高可用狀態
十一、總結

k8s集群角色	IP地址	主機名
master	192.168.209.116	k8s-master1
master	192.168.209.117	k8s-master2
master	192.168.209.118	k8s-master3
node	192.168.209.119	k8s-node1

echo "設置主機名"

echo "在 192.168.209.116 上執行如下："
hostnamectl set-hostname k8s-master1 && bash

echo "在 192.168.209.117 上執行如下："
hostnamectl set-hostname k8s-master2 && bash

echo "在 192.168.209.118 上執行如下："
hostnamectl set-hostname k8s-master3 && bash

echo "在 192.168.209.119 上執行如下："
hostnamectl set-hostname k8s-node1 && bash

一、初始化（所有節點都執行）

echo "配置阿里云yum源"
mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.bak
curl -o /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
yum clean all
yum makecache


echo "更新系統并安裝必要工具..."
yum update -y
yum install -y yum-utils device-mapper-persistent-data lvm2 bash-completion


echo "禁用 SELinux 和防火墻..."
setenforce 0
sed -i 's/^SELINUX=.*/SELINUX=disabled/' /etc/selinux/config
systemctl disable --now firewalld

echo "禁用 swap..."
swapoff -a
sed -i '/ swap / s/^\(.*\)$/#\1/g' /etc/fstab

echo "# 優化系統配置，開啟 IP 轉發、關閉 swap 等"
echo "優化系統配置..."
cat <<EOF | tee /etc/sysctl.d/k8s.conf
vm.swappiness = 0
vm.panic_on_oom = 0
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 0
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_syncookies = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables  = 1
net.bridge.bridge-nf-call-arptables = 1
net.ipv4.ip_forward = 1
net.ipv6.conf.all.disable_ipv6 = 1
net.netfilter.nf_conntrack_max = 2310720
fs.inotify.max_user_instances = 8192
fs.inotify.max_user_watches = 1048576
fs.file-max = 52706963
fs.nr_open = 52706963
EOF

sysctl -p /etc/sysctl.d/k8s.conf

echo "加載 br_netfilter 模塊..."
modprobe br_netfilter
lsmod | grep br_netfilter


echo "安裝 ipset 和 ipvsadm..."
yum -y install ipset ipvsadm


echo "配置 ipvsadm 模塊加載方式..."
cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack
EOF

chmod 755 /etc/sysconfig/modules/ipvs.modules
bash /etc/sysconfig/modules/ipvs.modules
lsmod | grep -e ip_vs
lsmod | grep -e ip_vs -e nf_conntrack

二、安裝containerd（所有節點都執行）

echo "安裝 Containerd..."
yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum install -y containerd.io
containerd config default > /etc/containerd/config.toml

#修改/etc/containerd/config.toml文件：
#1、把 SystemdCgroup = false 修改成 SystemdCgroup = true

#2、把 sandbox_image = "k8s.gcr.io/pause:3.6"修改成sandbox_image = "registry.aliyuncs.com/google_containers/pause:3.7"

#3、在[plugins."io.containerd.grpc.v1.cri".registry.mirrors]下面加4行
        [plugins."io.containerd.grpc.v1.cri".registry.mirrors."swr.cn-north-4.myhuaweicloud.com"]
          endpoint = ["https://swr.cn-north-4.myhuaweicloud.com"]

        [plugins."io.containerd.grpc.v1.cri".registry.mirrors."docker.io"]
          endpoint = ["https://swr.cn-north-4.myhuaweicloud.com/ddn-k8s/docker.io"]

systemctl enable --now containerd
systemctl start containerd

三、安裝docker-ce（所有節點都執行）

echo "停止舊版本docker"
sudo systemctl stop docker

echo "卸載舊版本docker"
# yum remove -y docker \
docker-client \
docker-client-latest \
docker-common \
docker-latest \
docker-latest-logrotate \
docker-logrotate \
docker-selinux \
docker-engine-selinux \
docker-engine

sudo rm -rf /var/lib/docker
sudo rm -rf /run/docker
sudo rm -rf /var/run/docker
sudo rm -rf /etc/docker

echo "安裝docker-ce"

yum install -y yum-utils device-mapper-persistent-data lvm2 git
yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

yum install docker-ce -y

cat /etc/docker/daemon.json
{
    "exec-opts": ["native.cgroupdriver=systemd"],
    "registry-mirrors": [
    "https://2a6bf1988cb6428c877f723ec7530dbc.mirror.swr.myhuaweicloud.com",
    "https://docker.m.daocloud.io",
    "https://hub-mirror.c.163.com",
    "https://mirror.baidubce.com",
    "https://your_preferred_mirror",
    "https://dockerhub.icu",
    "https://docker.registry.cyou",
    "https://docker-cf.registry.cyou",
    "https://dockercf.jsdelivr.fyi",
    "https://docker.jsdelivr.fyi",
    "https://dockertest.jsdelivr.fyi",
    "https://mirror.aliyuncs.com",
    "https://dockerproxy.com",
    "https://mirror.baidubce.com",
    "https://docker.m.daocloud.io",
    "https://docker.nju.edu.cn",
    "https://docker.mirrors.sjtug.sjtu.edu.cn",
    "https://docker.mirrors.ustc.edu.cn",
    "https://mirror.iscas.ac.cn",
    "https://docker.rainbond.cc"
    ]
}

systemctl enable --now docker
systemctl restart docker

四、安裝kubelet+kubeadm+kubectl（所有節點都執行）

echo "安裝 Kubernetes 工具..."
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

yum install -y kubelet-1.26.0 kubeadm-1.25.0 kubectl-1.26.0

systemctl enable kubelet
systemctl restart kubelet

五、安裝keepalived+nginx（只在master節點執行）

sudo yum install -y epel-release
sudo yum install -y nginx keepalived

echo "配置nginx"
vim /etc/nginx/nginx.conf

#在http塊的上方加上stream塊
...
stream {
    log_format  main  '$remote_addr $upstream_addr - [$time_local] $status $upstream_bytes_sent';
    access_log  /var/log/nginx/k8s-access.log  main;
    upstream k8s-apiserver {
            server 192.168.209.118:6443 weight=5 max_fails=3 fail_timeout=30s;
            server 192.168.209.117:6443 weight=5 max_fails=3 fail_timeout=30s;
            server 192.168.209.116:6443 weight=5 max_fails=3 fail_timeout=30s;
    }
    server {
       listen 16443; # 由于nginx與master節點復用，這個監聽端口不能是6443，否則會沖突
       proxy_pass k8s-apiserver;
    }
}

http {

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_kubeadm+nginx

echo "配置keepalived"
echo "--------k8s-master1配置--------------"


cat /etc/keepalived/keepalived.conf
global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id NGINX_MASTER
}
vrrp_script check_nginx {
    script "/etc/keepalived/check_nginx.sh"
}
vrrp_instance VI_1 {
    state MASTER
    interface ens33  # 修改為實際網卡名
    virtual_router_id 51 # VRRP 路由 ID實例，每個實例是唯一的
    priority 100    # 優先級，備服務器設置 90
    advert_int 1    # 指定VRRP 心跳包通告間隔時間，默認1秒
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    # 虛擬IP
    virtual_ipaddress {
        192.168.209.111/24
    }
    track_script {
        check_nginx
    }
}

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_kubeadm部署k8s高可用集群_02

echo "配置keepalived"
echo "--------k8s-master2配置--------------"


cat /etc/keepalived/keepalived.conf
global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id NGINX_BACKUP
}
vrrp_script check_nginx {
    script "/etc/keepalived/check_nginx.sh"
}
vrrp_instance VI_1 {
    state BACKUP
    interface ens33  # 修改為實際網卡名
    virtual_router_id 51 # VRRP 路由 ID實例，每個實例是唯一的
    priority 90    # 優先級，備服務器設置 90
    advert_int 1    # 指定VRRP 心跳包通告間隔時間，默認1秒
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    # 虛擬IP
    virtual_ipaddress {
        192.168.209.111/24
    }
    track_script {
        check_nginx
    }
}

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_kubeadm+nginx_03

echo "配置keepalived"
echo "--------k8s-master3配置--------------"

global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id NGINX_BACKUP
}
vrrp_script check_nginx {
    script "/etc/keepalived/check_nginx.sh"
}
vrrp_instance VI_1 {
    state BACKUP
    interface ens33  # 修改為實際網卡名
    virtual_router_id 51 # VRRP 路由 ID實例，每個實例是唯一的
    priority 80    # 優先級，備服務器設置 80
    advert_int 1    # 指定VRRP 心跳包通告間隔時間，默認1秒
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    # 虛擬IP
    virtual_ipaddress {
        192.168.209.111/24
    }
    track_script {
        check_nginx
    }
}

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_kubeadm部署k8s高可用集群_04

cat /etc/keepalived/check_nginx.sh
#!/bin/bash
#1、判斷Nginx是否存活
counter=$(ps -ef |grep nginx | grep sbin | egrep -cv "grep|$$" )
if [ $counter -eq 0 ]; then
    #2、如果不存活則嘗試啟動Nginx
    service nginx start
    sleep 2
    #3、等待2秒后再次獲取一次Nginx狀態
    counter=$(ps -ef |grep nginx | grep sbin | egrep -cv "grep|$$" )
    #4、再次進行判斷，如Nginx還不存活則停止Keepalived，讓地址進行漂移
    if [ $counter -eq 0 ]; then
        service  keepalived stop
    fi
fi

echo "啟動nginx和keepalived服務"

chmod +x /etc/keepalived/check_nginx.sh
systemctl daemon-reload && systemctl restart nginx
systemctl restart keepalived && systemctl enable nginx keepalived

六、kubeadm初始化k8s集群（只在k8s-master1執行）

改注釋文字的地方，改成下面這個樣子

kubeadm config print init-defaults > kubeadm.yaml

cat kubeadm.yaml

apiVersion: kubeadm.k8s.io/v1beta3
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
#localAPIEndpoint:            #注釋掉
#  advertiseAddress: 1.2.3.4  #注釋掉
#  bindPort: 6443             #注釋掉
nodeRegistration:
  criSocket: unix:///run/containerd/containerd.sock   #指定好
  imagePullPolicy: IfNotPresent
#  name: node
  taints: null
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta3
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns: {}
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers     #改成這樣
kind: ClusterConfiguration
kubernetesVersion: 1.26.0
controlPlaneEndpoint: 192.168.209.111:16443                              #改成vip+nginx端口
networking:
  dnsDomain: cluster.local
  serviceSubnet: 10.96.0.0/12
  podSubnet: 10.244.0.0/16                                    #指定pod網段                                   
scheduler: {}
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
mode: ipvs
---
apiVersion: kubelet.config.k8s.io/v1beta1
kind: KubeletConfiguration
cgroupDriver: systemd

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_keepalived+nginx_05

kubeadm init --cnotallow=kubeadm.yaml --ignore-preflight-errors=SystemVerification

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_kubeadm+nginx_06

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
kubectl get nodes

至此 k8s主節點已安裝完成

-----------------------------

注意提前去k8s-master2和k8s-master3節點上創建個文件夾

mkdir -p /etc/kubernetes/pki/etcd/

echo "將k8s-master1中的證書scp到k8s-master2和k8s-master3節點"

cd  /etc/kubernetes/pki/
scp ca.* k8s-master2:/etc/kubernetes/pki/
scp sa.* k8s-master2:/etc/kubernetes/pki/
scp front-proxy-ca.*  k8s-master2:/etc/kubernetes/pki/
scp etcd/ca.*  k8s-master2:/etc/kubernetes/pki/etcd/

scp ca.* k8s-master3:/etc/kubernetes/pki/
scp sa.* k8s-master3:/etc/kubernetes/pki/
scp front-proxy-ca.*  k8s-master3:/etc/kubernetes/pki/
scp etcd/ca.*  k8s-master3:/etc/kubernetes/pki/etcd/

七、將其他master join到k8s集群（在k8s-master2和k8s-master3執行）

--control-plane --ignore-preflight-errors=SystemVerification 加上這兩個

kubeadm join 192.168.209.111:16443 --token abcdef.0123456789abcdef \
        --discovery-token-ca-cert-hash sha256:ec363a06d7681d941e7969fb6e994f4a4c1c4ef0d154c7290131c1e830b4bec5 \
        --control-plane --ignore-preflight-errors=SystemVerification

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_centos7部署k8s高可用集群_07

八、將node節點join到k8s集群（只在k8s-node1節點執行）

kubeadm join 192.168.209.111:16443 --token abcdef.0123456789abcdef \
        --discovery-token-ca-cert-hash sha256:ec363a06d7681d941e7969fb6e994f4a4c1c4ef0d154c7290131c1e830b4bec5   --ignore-preflight-errors=SystemVerification

九、部署calico網絡插件（只在k8s-master1執行）

curl https://raw.githubusercontent.com/projectcalico/calico/v3.26.0/manifests/calico.yaml -O

sed -i 's|docker.io/calico/cni:v3.25.0|swr.cn-north-4.myhuaweicloud.com/ddn-k8s/docker.io/calico/cni:v3.25.0|g' calico.yaml
sed -i 's|docker.io/calico/node:v3.25.0|swr.cn-north-4.myhuaweicloud.com/ddn-k8s/docker.io/calico/node:v3.25.0|g' calico.yaml
sed -i 's|docker.io/calico/kube-controllers:v3.25.0|swr.cn-north-4.myhuaweicloud.com/ddn-k8s/docker.io/calico/kube-controllers:v3.25.0|g' calico.yaml

cat calico.yaml
#在下面對應位置加上2行內容
            - name: IP_AUTODETECTION_METHOD
              value: "interface=ens33"
              
#在下面對應位置加上2行內容              
            - name: CALICO_IPV4POOL_CIDR
              value: "10.244.0.0/16"

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_centos7部署k8s高可用集群_08

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_kubeadm部署k8s高可用集群_09

kubectl apply -f calico.yaml

calico相關pod為running代表成功

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_kubeadm+nginx_10

測試DNS 解析和網絡是否正常

kubectl run busybox --image swr.cn-north-4.myhuaweicloud.com/ddn-k8s/docker.io/library/busybox:1.28 --image-pull-policy=IfNotPresent --restart=Never --rm -it busybox -- sh

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_centos7部署k8s高可用集群_11

十、配置etcd高可用狀態

vim /etc/kubernetes/manifests/etcd.yaml

#將- --initial-cluster=xuegod63=https://192.168.209.116:2380
改成
- --initial-cluster=k8s-master1=https://192.168.209.116:2380,k8s-master2=https://192.168.209.117:2380,k8s-master3=https://192.168.209.118:2380

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_centos7部署k8s高可用集群_12

測試 etcd 集群是否配置成功：

docker run --rm -it --net host -v /etc/kubernetes:/etc/kubernetes  registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.5.4-0 etcdctl --cert /etc/kubernetes/pki/etcd/peer.crt --key /etc/kubernetes/pki/etcd/peer.key --cacert /etc/kubernetes/pki/etcd/ca.crt member list

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_kubeadm+keepalived_13

docker run --rm -it --net host -v /etc/kubernetes:/etc/kubernetes registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.5.4-0 etcdctl --cert /etc/kubernetes/pki/etcd/peer.crt --key /etc/kubernetes/pki/etcd/peer.key --cacert /etc/kubernetes/pki/etcd/ca.crt --endpoints=https://192.168.209.116:2379,https://192.168.209.117:2379,https://192.168.209.118:2379 endpoint health --cluster

全是successfuly代表正常，博主電腦資源不足把一臺master3關機了

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_centos7部署k8s高可用集群_14

docker run --rm -it --net host -v /etc/kubernetes:/etc/kubernetes registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.5.4-0 etcdctl -w table --cert /etc/kubernetes/pki/etcd/peer.crt --key /etc/kubernetes/pki/etcd/peer.key --cacert /etc/kubernetes/pki/etcd/ca.crt --endpoints=https://192.168.209.116:2379,https://192.168.209.117:2379,https://192.168.209.118:2379  endpoint status --cluster

能看到三個endpoint代表正常，博主電腦資源不足把一臺master3關機了

centos7基于keepalived+nginx部署k8s1.26.0高可用集群_kubeadm+keepalived_15

十一、總結

到此這篇關于centos7基于keepalived+nginx部署k8s1.26.0高可用集群的文章就介紹到這了,更多相關Centos7安裝部署Kubernetes(k8s) 高可用集群內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章:

国产无遮挡裸体免费直播视频,久久精品国产蜜臀av,动漫在线视频一区二区,欧亚日韩一区二区三区,久艹在线免费视频,国产精品美女网站免费,正在播放 97超级视频在线观看,斗破苍穹年番在线观看免费,51最新乱码中文字幕

centos7基于keepalived+nginx部署k8s1.26.0高可用集群

目錄

一、初始化（所有節點都執行）

二、安裝containerd（所有節點都執行）

三、安裝docker-ce（所有節點都執行）

四、安裝kubelet+kubeadm+kubectl（所有節點都執行）

五、安裝keepalived+nginx（只在master節點執行）

六、kubeadm初始化k8s集群（只在k8s-master1執行）

七、將其他master join到k8s集群（在k8s-master2和k8s-master3執行）

八、將node節點join到k8s集群（只在k8s-node1節點執行）

九、部署calico網絡插件（只在k8s-master1執行）

十、配置etcd高可用狀態

十一、總結

相關文章

最新評論

大家感興趣的內容

最近更新的內容

常用在線小工具

国产无遮挡裸体免费直播视频,久久精品国产蜜臀av,动漫在线视频一区二区,欧亚日韩一区二区三区,久艹在线 免费视频,国产精品美女网站免费,正在播放 97超级视频在线观看,斗破苍穹年番在线观看免费,51最新乱码中文字幕

centos7基于keepalived+nginx部署k8s1.26.0高可用集群

目錄

一、初始化（所有節點都執行）

二、安裝containerd（所有節點都執行）

三、安裝docker-ce（所有節點都執行）

四、安裝kubelet+kubeadm+kubectl（所有節點都執行）

五、安裝keepalived+nginx（只在master節點執行）

六、kubeadm初始化k8s集群（只在k8s-master1執行）

七、將其他master join到k8s集群（在k8s-master2和k8s-master3執行）

八、將node節點join到k8s集群（只在k8s-node1節點執行）

九、部署calico網絡插件（只在k8s-master1執行）

十、配置etcd高可用狀態

十一、總結

相關文章

最新評論

大家感興趣的內容

最近更新的內容

常用在線小工具

国产无遮挡裸体免费直播视频,久久精品国产蜜臀av,动漫在线视频一区二区,欧亚日韩一区二区三区,久艹在线免费视频,国产精品美女网站免费,正在播放 97超级视频在线观看,斗破苍穹年番在线观看免费,51最新乱码中文字幕

一、初始化（所有節點都執行）

三、安裝docker-ce（所有節點都執行）

四、安裝kubelet+kubeadm+kubectl（所有節點都執行）

五、安裝keepalived+nginx（只在master節點執行）

六、kubeadm初始化k8s集群（只在k8s-master1執行）

七、將其他master join到k8s集群（在k8s-master2和k8s-master3執行）

八、將node節點join到k8s集群（只在k8s-node1節點執行）

十一、總結